StarTech.com USB2VGAE Bedienungsanleitung

USB2VGAE

USB 2.0 to VGA Video Display

Graphics Adapter

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to StarTech.com. Where

they occur these references are for illustrative purposes only and do not represent an endorse-

ment of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. Regardless of any direct acknowl-

edgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols

contained in this manual and related documents are the property of their respective holders.

Instruction Manual

Table of Contents

Introduction ................................................................................... 1

Features ......................................................................................1

Package Contents .......................................................................1

System Requirements .................................................................1

Installation...................................................................................... 2

Quick Installation .........................................................................2

Windows CE Installation..............................................................2

Windows CE Un-Installation........................................................3

Conﬁguration................................................................................. 3

Display Utility ...............................................................................3

Support Modes............................................................................3

Support Resolutions....................................................................4

USB-Graphics Card (Extended) .................................................4

Mirror ..........................................................................................5

USB-Graphics Card (Off) ............................................................5

Display Properties of the USB2VGAE.......................................... 6

Virtually Repositioning Your Displays ......................................... 7

Appendix ........................................................................................ 8

Frequently Asked Questions........................................................8

Troubleshooting Tips....................................................................9

Technical Support ......................................................................... 10

Warranty Information .................................................................... 10

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com USB2VGAE USB 2.0 to VGA

Video Display Graphics Adapter. This innovative device allows you to

easily add a second display without installing a new video card, while

running resolutions of up to 1280x1024.

This compact USB to VGA solution supports Windows CE 5.0 and is ideal

for mobile or custom installs using Windows CE.

Features

No power adapter required and easy to install•

Supports resolutions of up to 1280x1024•

Supports Windows 2000/XP/Vista™ and Windows CE 5.0•

Works with desktop and notebook computers•

Package Contents

1 x USB to VGA adapter•

1 x Driver/Manual CD•

1 x User Manual•

System Requirements

Pentium 4/Celeron family or AMD K6/Athlon/Duron family with 1.5GHz•

256MB RAM or higher•

An available USB 2.0 port (with USB 2.0 host capability - USB 1.1 will•

sufﬁce, however operation will be limited)

Windows 2000 SP4, Windows XP SP2 and Windows Vista™•

Instruction Manual

Installation

Quick Installation

Follow these steps to quickly install your new USB 2.0 Graphics Card:

Note: Do not plug the USB 2.0 Graphics Card into the system

before the driver is ﬁnished installing.

Insert the driver/manual CD and follow the instructions.1.

Turn on your second monitor and connect it to the adapter.2.

Connect the adapter to an available USB 2.0 port.3.

Once ﬁnished, you should see the extended display on the second4.

monitor.

Windows CE Installation

Copy the ﬁle1. trigger.cab (located on your software CD) to a USB 2.0

Flash drive.

Plug the USB 2.0 Flash drive into your device and open the2. trigger.cab

ﬁle.

Click3. Yes to continue the installation.

Choose4. Device to install the USB 2.0 VGA on Windows CE, then click

Install to complete the installation.

Connect the external display device to the VGA connector (DB15) of5.

the USB2VGAE adapter and turn the display power on. Then, connect

the USB2VGAE to your smart phone or PDA**. Your mobile device’s

display should now be visible on your external display device.

**Please note that the USB port on the Windows CE device must offer

USB 2.0 Host capability. USB 1.1 can be used, but will not deliver the

same performance as USB 2.0.

Instruction Manual

Windows CE Un-Installation

Disconnect the USB 2.0 Graphics card from your smart phone or PDA.1.

Select Remove Programs from the Settings menu.

Select2. MCT Trigger USB 2.0 VGA for Win Mobile, then click Remove.

Select3. Yes to remove the program and complete the un-installation

process.

Conguration

Display Utility

After the driver is installed, a utility will appear in the lower right taskbar.

This utility allows you to quickly change the settings and resolution of your

USB 2.0 Graphics Card. Access the menu by right clicking on the icon.

Support Modes

Primary1.

Extended2.

Mirror3.

Instruction Manual

Support Resolutions

Aspect Ratio Resolution Color Quality

5:4 1280 x 1024 16,32 bit

4:3 1024 x 768 16,32 bit

4:3 800 x 600 16,32 bit

4:3 640 x 480 16,32 bit

Note: 1280 x 768 is the ideal resolution for viewing DVDs.

USB-Graphics Card (Primary)

To make the USB 2.0 Graphics Card the main display adapter in the

system. The system’s main display (monitor) will automatically switch to

being the secondary display adapter and act as the extended desktop.

You can disable the other utility (usually found in the same toolbar located

on the bottom right hand corner) to make this function work properly.

Note: The Primary Function may disable the main display.

Instruction Manual

USB-Graphics Card (Extended)

By default, USB2VGAE will extend your Windows desktop.You can

change the relative position of this extension under the Display Proper-

ties (Go to Control Panel -> double click on the Display and select the

Settings tab).

Note: Playback suggestion: Media Player Classic software on Windows

Vista™.

Mirror

Your USB 2.0 Graphics Card will mirror your Windows desktop. You can

see the same desktop image in both monitors.

USB-Graphics Card (O)

This option disables the USB2VGAE on the system.

Instruction Manual

Display Properties of the USB2VGAE

To access the Display Properties for the USB2VGAE, go to Control Panel

and double click on the Display icon. Select the Settings tab.

Click on the Display pull-down menu and select the Default Monitor on

USB 2.0 Graphics Card-Extend. Then, click Extend my Windows desktop

onto this monitor. From here, you can change the resolution and color

depth as desired. Click OK to apply the settings.You can also make these

changes using the USB 2.0 Graphics Card utility.

Instruction Manual

Virtually Repositioning Your Displays

On the Settings tab of your Display Properties, click and drag the appro-

priate monitor icon (labeled 1 or 2) to the desired position. For example,

the secondary display can be dragged to the left of the primary display, al-

lowing it to be virtually on the left. Click OK or Apply to save the changes.

To make sure the USB2VGAE has been installed successfully:

Right-click on1. My Computer and select Manage, to open the Computer

Management window.

In the left pane, click on2. Device Manager. In the right pane, double-

click on Display adapters. Here, you will see two options:

USB2.0 Graphics Card- Extend•

USB2.0 Graphics Card- Mirror•

Plug-in the USB2VGAE adapter. Double-click Universal Serial Bus con-

trollers, where you will see:

USB2.0 Graphics Card.•

Inhaltsverzeichnis

Andere StarTech.com Adapter Handbücher

StarTech.com

StarTech.com DKT31CDHPD3 Bedienungsanleitung

StarTech.com

StarTech.com USB2PS2 Bedienungsanleitung

StarTech.com

StarTech.com IDE35252X Bedienungsanleitung

StarTech.com

StarTech.com MDP2HDMIUSBA Bedienungsanleitung

StarTech.com

StarTech.com PEXM2SAT32N1 Bedienungsanleitung

StarTech.com

StarTech.com DKT31CHVL Bedienungsanleitung

StarTech.com

StarTech.com TBT3TBTADAP Bedienungsanleitung

StarTech.com

StarTech.com CF2X2IDE25 Bedienungsanleitung

StarTech.com

StarTech.com PEX433WAC11 Bedienungsanleitung

StarTech.com

StarTech.com PEX16S952LP Bedienungsanleitung

StarTech.com

StarTech.com PEX300WN2X2 Bedienungsanleitung

StarTech.com

StarTech.com USB31GEVG Bedienungsanleitung

StarTech.com

StarTech.com DKT30CSDHPD3 Bedienungsanleitung

StarTech.com

StarTech.com S2510U33USM Bedienungsanleitung

StarTech.com

StarTech.com U2M2E125 Bedienungsanleitung

StarTech.com

StarTech.com DK30C2HAGPD Bedienungsanleitung

StarTech.com

StarTech.com DKT30CHVW Bedienungsanleitung

StarTech.com

StarTech.com MPEX2S952 Bedienungsanleitung

StarTech.com

StarTech.com ICUSBAUDIO Bedienungsanleitung

StarTech.com

StarTech.com DP2HDMIUSBA Bedienungsanleitung

StarTech.com

StarTech.com PCI220USB Bedienungsanleitung

StarTech.com

StarTech.com ICUSBANDR232 Bedienungsanleitung

StarTech.com

StarTech.com WIFI2HDMC Bedienungsanleitung

StarTech.com

StarTech.com US100A20FXSC Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung