StarTech.com SDOCKU33EBV Bedienungsanleitung

Manual Revision: 08/31/2016

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

SDOCKU33EBV

USB 3.0/eSATA to SATA III Hard Drive

Dock w/UASP

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

Recommended System Requirements.............................................................................................. 1

Product Diagram ....................................................................................2

Front View .................................................................................................................................................... 2

Rear View...................................................................................................................................................... 2

Docking Station Installation.................................................................3

Drive Installation....................................................................................3

Drive Removal.........................................................................................4

Drive Initialization .................................................................................................................................... 4

LED Indicators.........................................................................................5

Specications..........................................................................................5

Technical Support ..................................................................................6

Warranty Information............................................................................6

Instruction Manual

Introduction

Packaging Contents

• 1 x USB 3.0/eSATA to SATA III hard drive dock with UASP

• 1 x USB 3.0 cable

• 1 x eSATA cable

• 1 x universal power adapter (NA/JP, EU, UK, ANZ)

• 1 x instruction manual

WARNING:

Hard drives and docking stations require careful handling. If you are not careful with

your hard disk, lost data may result. Always handle your hard drive and docking station

with caution. Be sure that you are properly grounded by wearing an anti-static strap

when handling computer components or discharge yourself of any static electricity

build-up by touching a large grounded metal surface (such as the computer case) for

several seconds.

Recommended System Requirements

• Computer system with available eSATA port or USB 3.0/2.0 port

• 2.5” or 3.5”SATA Hard Drives (HDD) or Solid State Drives (SSD)

Instruction Manual

Product Diagram

Front View

1. Power / activity LED

2. SSD/HDD Slot

Rear View

3. Power switch

4. Power adapter port

5. USB 3.0 port

6. eSATA port

3 4

Instruction Manual

Docking Station Installation

1. Connect the Dock to an available power outlet, using the provided power adapter.

2. Connect the Dock to your computer system, using the provided USB or eSATA cable.

Drive Installation

1. Carefully align and insert the 2.5” or 3.5” SATA drive you wish to dock in the HDD/

SSD slot on the docking station, such that the SATA power and data connectors on

the drive are properly aligned with the corresponding connectors inside the hard

drive slot.

2. Press the power switch to the “on”position.

3. Once the drives have been installed and the docking station has been powered on,

the computer Operating System will automatically recognize the drive and it will be

accessible as though it were installed in the system internally.

Note: If your computer fails to automatically recognize your drive it is likely your

drive has not been initialized or formatted correctly. (See Drive Initialization below for

further instructions.)

Instruction Manual

Drive Removal

WARNING:

Ensure your hard drive has been disconnected from your computer operating system

prior to attempting drive removal. Failure to properly disconnect your drive may result

in lost data or drive damage. (See Disconnecting the Hard Drive in Docking Station

Operation for further instructions.)

1. Turn o the docking station by pressing the power switch to the o position.

2. Carefully grasp the drive and lift it upwards until the bottom of the drive has

completely risen above the hard drive slot.

3. Safely and carefully store your drive in a secure location. (See your hard drive

manual for proper storage instructions.)

Drive Initialization

Prior to using your installed drive, it will need to be initialized and formatted to the

operating system requirements in order for your computer system to recognize it.

1. From the main Windows desktop, right-click on “My Computer”(“Computer” in

Vista/ 7 / 8/ 8.1), then select Manage. In the new Computer Management window,

select Disk Management from the left window panel.

2. A dialog window will automatically appear, asking you to initialize the drive.

Depending on the version of Windows, it will give you the option of either creating an

“MBR” or “GPT” disk.

Note: GPT (GUID partition) is required for drives larger that 2TB but is not compatible

with some older operating systems, while MBR is supported by newer and older

operating systems.

3. Once initialized, locate the Disk that says it is “Unallocated” (check the listed hard

drive capacity to conrm it’s the correct hard drive) and then right-click in the

section that says “Unallocated” and select “New Partition”.

4. Follow the on-screen prompts to initialize the drive in the format of your choice.

Instruction Manual

LED Indicators

The Drive Power/Activity indicator enable you to monitor drive activity. When the

docking station is powered on, the LED will illuminate. While the hard drive is being

accessed, the LED will blink. Do not remove your drive from the docking station

while the LED is ashing, as it could damage to your drive, resulting in data loss.

Disconnecting the Hard Drive

Windows

1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.

2. Select the storage device from the list that appears.

3. Wait for the message indicating that it is now safe to remove the device.

Note: Removing the connected drive prior to receiving notication that it is safe to

do so, could result in losing or corrupting data stored on the drive. Once the Safe

to Remove Hardware message appears, please remove the drive from the docking

station. (See Drive Removal.)

Mac OS X

To safely disconnect the attached drive from the host computer, close any windows

listing the contents of the removable drive. Once all windows are closed, click on the

USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.

Allow 5 seconds before physically removing the drive from the docking station.

Specications

Host Interface USB 3.0

eSATA

External Connectors 1 x USB 3.0 B female

1 x eSATA female

Internal Connectors 1 x SATA DATA (7 pin) + Power (15 pin)

Receptacle

Maximum Data Transfer Rate USB 3.0: 5 Gbit/s

eSATA: 6Gbit/s

Compatible Operating Systems Operating System Independent

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Inhaltsverzeichnis

Andere StarTech.com Dockingstation Handbücher

StarTech.com

StarTech.com SDOCK1EU3P2 Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe SATDOCKU2GB Bedienungsanleitung

StarTech.com

StarTech.com 8STSATDOCK5U3ER Bedienungsanleitung

StarTech.com

StarTech.com DKT31CHDVCM Bedienungsanleitung

StarTech.com

StarTech.com SDOCK4U33 Bedienungsanleitung

StarTech.com

StarTech.com Thunderbolt 3 Series Bedienungsanleitung

StarTech.com

StarTech.com USB3SDOCKDD Bedienungsanleitung

StarTech.com

StarTech.com SDOCKU313E Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK4U2E Bedienungsanleitung

StarTech.com

StarTech.com UNIDOCKU33 Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK22R Bedienungsanleitung

StarTech.com

StarTech.com SDOCKU33EF Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK25U Bedienungsanleitung

StarTech.com

StarTech.com DK30ADD Bedienungsanleitung

StarTech.com

StarTech.com SDOCK2U313R Bedienungsanleitung

StarTech.com

StarTech.com DKWG30DPHPD Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK4U2E Bedienungsanleitung

StarTech.com

StarTech.com USBVGADOCK Bedienungsanleitung

StarTech.com

StarTech.com UNIDOCK2U Bedienungsanleitung

StarTech.com

StarTech.com DK30CHHPD Bedienungsanleitung

StarTech.com

StarTech.com TB2DOCK4KDHC Bedienungsanleitung

StarTech.com

StarTech.com TB3DKDPMAW Bedienungsanleitung

StarTech.com

StarTech.com SATADOCK22UE Bedienungsanleitung

StarTech.com

StarTech.com SATDOCK22U3S Bedienungsanleitung

Beliebte Dockingstation Handbücher anderer Marken

Sony

Sony Dream Machine XDR-DS12iP Bedienungsanleitung

Acer

Acer USB Type-C Dock II Bedienungsanleitung

ATEN

ATEN UC-2000 Bedienungsanleitung

Xcellon

Xcellon HDD-202 Bedienungsanleitung

Dok

Dok CR09 Bedienungsanleitung

Philips

Philips BTM630/12 Bedienungsanleitung

IOGear

IOGear Travel Pro GUD3C09 Bedienungsanleitung

RKI

RKI SDM-E2 Bedienungsanleitung

iHome

iHome iP15 Bedienungsanleitung

VITURE ONE

VITURE ONE MOBILE DOCK Bedienungsanleitung

Lindy

Lindy 42984 Bedienungsanleitung

CipherLab

CipherLab 8001 Bedienungsanleitung

Pyle

Pyle PIPDSP2 Bedienungsanleitung

Avol

Avol AS2350 Bedienungsanleitung

Datalogic

Datalogic JoyaTouch Bedienungsanleitung

Philips

Philips DC190/79 Bedienungsanleitung

Targus

Targus DOCK315EUZ Bedienungsanleitung

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Bedienungsanleitung