StarTech.com ST12MHDLANU Bedienungsanleitung

Manual Revision: 08/16/2023

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/ ST12MHDLANU.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

ST12MHDLANU

HDMI over IP Extender Kit with USB

and Serial

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Introduction............................................................................................1

Packaging contents.................................................................................................................................. 1

System requirements............................................................................................................................... 1

Product diagram ....................................................................................2

Transmitter Unit......................................................................................................................................... 2

Receiver Unit............................................................................................................................................... 3

Installation ..............................................................................................4

Preparing your site.................................................................................................................................... 4

Hardware installation .............................................................................................................................. 4

Software installation................................................................................................................................ 6

Software operation................................................................................6

Connecting your transmitters and receivers to the software ................................................... 6

Switching your remote displays between video sources........................................................... 10

Conguring your remote displays for a video wall application ............................................... 12

Advanced operation and help.............................................................................................................. 16

Technical support...................................................................................18

Warranty information............................................................................18

Introduction

Packaging contents

• 1 x HDMI over IP transmitter

• 1 x HDMI over IP receiver

• 2 x power adapters

• 2 x screws

• 1 x screwdriver

• 2 x Cat5 cables

• 2 x mounting brackets

• 1 x quick install guide

System requirements

• HDMI enabled video source (e.g. acomputer or Blu-ray™ player)

• HDMI enabled display device(s) (e.g. television, projector), one for each receiver

• HDMI cabling for your video source and each display

• Available AC electrical outlet for the transmitter and each receiver

• Network cabling for the extender and each receiver

• Standard USB A to USB B cable (optional for USB peripheral extension)

• Up to four USB peripheral devices (optional for USB peripheral extension)

Instruction manual

Instruction Manual

Product diagram

Transmitter Unit

1. USB host port

2. Video input port (HDMI)

3. LAN port (RJ-45 connector)

4. Reset button

5. Power jack

6. Link and power LED

7. Function 2 button

8. Function 1 button

9. Dip rotary switch

10. Serial control (not active)

11. Serial extension (for extending RS232 signal)

345

78910 11

Instruction manual

Receiver Unit

1. USB peripheral ports

2. Video output port (HDMI)

3. LAN port (RJ-45 connector)

4. Reset button

5. Power jack

6. Link and power LED

7. Function 2 button

8. Function 1 button

9. Dip rotary switch

10. Serial control (not active)

11. Serial extension (for extending RS232 signal)

Note: Serial 1 (control) ports are not active. To control the ST12MHDLANU please

download our free mobile application. (see Page *.)

(Additional receiver units sold separately, StarTech.com SKU: ST12MHDLANUR)

345

789

10 11

Instruction manual

Installation

Preparing your site

Note: The ST12MHDLANU HDMI extender kit lets you extend your video and USB

signals over a Gigabit LAN network – beyond the typical cable length restriction of 330

ft. (100m) of Gigabit network portals.

Refer to the manufacturer of the network equipment to determine the length

restriction and to ensure the transmitter unit and receiver unit(s) are all within the

restricted range of the nearest network portal.

Ensure the transmitter unit, and receiver unit(s) are all situated near AC electrical

outlets.

1. Determine where the local video source (i.e. computer, Blu-ray player) will be

located and set up the transmitter device near that location.

2. Determine where the remote display will be located and set up the receiver near

that location.

3. (Optional) If using additional displays determine where they will be located and

set the additional receiver unit(s) near that location.

Hardware installation

Video wall or point to multi-point installation with a Gigabit LAN network

1. Install the transmitter unit

a) Connect a video source device, such as a computer or Blu-ray player, to the

transmitter’s video input port.

b) (Optional) If you’re using the ST12MHDLANU extender kit to extend USB peripheral

devices, use a standard USB A to USB B cable to connect the USB host port on the

transmitter unit to a USB port on a video source device such as a computer or Blu-

ray player.

c) Connect the transmitter’s DC 9-12V power jack to an AC electrical outlet, using one

of the included power adapters.

2. Install the receiver unit(s)

a) Connect a display to the receiver unit’s video output port using an HDMI cable.

b) (Optional) If you are using the ST12MHDLANU extender kit to extend USB peripheral

devices, connect up to four USB peripheral devices to the receiver unit’s USB ports.

c) Connect the receiver unit’s power jack to an AC electrical outlet, using one of the

included power adapters.

Instruction Manual

d) (Optional) If you are using additional ST12MHDLANUR receivers (sold separately),

repeat steps [a) through c)] for each additional receiver.

Note: The rotary dip switches on the transmitter and each receiver connected to the

network must be set in the same position for the devices to communicate.

3. Connect the devices to a Gigabit LAN network

a) Connect an RJ-45 terminated Cat5e or Cat6 Ethernet cable to the LAN port on the

transmitter unit, and to each of the receiver units.

b) Connect the other end of the Cat5e or Cat6 cable to a Gigabit LAN hub, router or

switch.

Note: Your router must support IGMP snooping. Please refer to your network switch or

router documentation to ensure IGMP snooping is supported and enabled.

4. Verify that the image from your video source appears on video display(s) attached

to the receiver unit(s).

(Additional receiver units sold separately, StarTech.com SKU: ST12MHDLANUR)

Instruction Manual

Software installation

The HDMI distribution kit features video control software that helps you manage your

IP video distribution and video wall conguration. The software is available on iOS for

iPhone or iPad, and Android™ for smartphones or tablets

To install the software:

1. Visit http://www.StarTech.com/ST12MHDLANU, using the device you intend to

install software on.

2. Under the overview tab, select the link for the store that corresponds with your

device.

3. Select the option to download and install the software from the store page.

4. Open the software, to verify that it has installed correctly.

Software operation

Connecting your transmitters and

receivers to the software

Notes:

• Your router must support IGMP snooping. Please refer to your network switch or

router documentation to ensure IGMP snooping is supported and enabled on your

router.

• The smartphone or tablet, that you’ve installed the software on, is connected to the

same network as your transmitter(s) and receiver(s)

1. Launch the application by clicking the icon on your smartphone or tablet.

Instruction Manual

2. The application will open on the Devices tab, and will automatically search for

transmitters and receivers on your network and list them within the Devices tab.

Note: you can reinitiate the device search, by selecting refresh button in the top

right-hand corner of the Devices tab.

Inhaltsverzeichnis

Andere StarTech.com Extender Handbücher

StarTech.com

StarTech.com ST121R Bedienungsanleitung

StarTech.com

StarTech.com ST121HDT4P Bedienungsanleitung

StarTech.com

StarTech.com USB110EXT2 Bedienungsanleitung

StarTech.com

StarTech.com ST121USBHD Bedienungsanleitung

StarTech.com

StarTech.com EOC1110R Bedienungsanleitung

StarTech.com

StarTech.com HDBOOST4K Bedienungsanleitung

StarTech.com

StarTech.com ST12MHDLAN4K Bedienungsanleitung

StarTech.com

StarTech.com UTPE Series Bedienungsanleitung

StarTech.com

StarTech.com SV565UTPUL Bedienungsanleitung

StarTech.com

StarTech.com 8STUSB2001EXTV Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB204EXTFIB Bedienungsanleitung

StarTech.com

StarTech.com SV565UTPHDU Bedienungsanleitung

StarTech.com

StarTech.com 8STST12MHDLAN Bedienungsanleitung

StarTech.com

StarTech.com ST121R Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB221EXT Bedienungsanleitung

StarTech.com

StarTech.com 8STST121HDBT20S Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB100EXT Bedienungsanleitung

StarTech.com

StarTech.com ST121HDBTE Bedienungsanleitung

StarTech.com

StarTech.com STDHVHDBT Bedienungsanleitung

StarTech.com

StarTech.com 110VDSLEXT Bedienungsanleitung

StarTech.com

StarTech.com USB2001EXTV Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB201EXT Bedienungsanleitung

StarTech.com

StarTech.com ST121HDBTU Bedienungsanleitung

StarTech.com

StarTech.com SV565UTP Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung