StarTech.com ST12MHDLNHR Bedienungsanleitung

Manual Revision: 08/17/2018

Forthemostup-to-dateinformation,pleasevisit:www.startech.com

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

JP: 取扱説明書 - jp.startech.com

Manual Revision: 08/17/2018

For the latest information, technical specications, and support for

this product, please visit www.startech.com

ST12MHDLNHK

ST12MHDLNHR

HDMI Over IP Extender Kit - 1080p

actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Package Contents ..................................................................................................................................... 1

Requirements ............................................................................................................................................. 2

Product Diagram ....................................................................................3

Transmitter Front View ............................................................................................................................ 3

Transmitter Rear View.............................................................................................................................. 3

Receiver Front View.................................................................................................................................. 4

Receiver Rear View.................................................................................................................................... 4

Hardware Installation and Conguration ..........................................5

Preparing Your Site ................................................................................................................................... 5

Point-to-Point Installation without a LAN Network...................................................................... 5

Point-to-Multipoint Installation with a LAN Network ................................................................. 6

Matrix with a Gigabit LAN Network.................................................................................................... 7

IP Conguration......................................................................................................................................... 8

Operation ................................................................................................10

LED Indicators............................................................................................................................................. 10

Push-Button Control ................................................................................................................................ 11

Infrared (IR) Blaster and Receiver Operation ................................................................................... 11

IR Remote Control..................................................................................................................................... 12

Bandwidth Switch..................................................................................................................................... 12

Resolution Switch ..................................................................................................................................... 12

Serial Control .............................................................................................................................................. 13

Technical support...................................................................................17

Warranty information............................................................................17

Instruction Manual

Introduction

Package Contents for ST12MHDLNHK

• 1 x HDMI Over IP Transmitter

• 1 x HDMI Over IP Receiver

• 2 x Universal Power Adapters (NA, EU, UK, ANZ)

• 2 x Mounting Brackets

• 2 x CAT5 Cables

• 1 x Plastic Screwdriver

• 1 x IR Remote Control

• 2 x USB-A to Mini USB-B Cable

• 1 x DB9 to 2.5 mm Serial Adapter Cable

• 1 x IR Blaster

• 1 x IR Receiver

• 8 x Rubber Feet

• 1 x Instruction Manual

Package Contents for ST12MHDLNHR

• 1 x HDMI Over IP Receiver

• 1 x Universal Power Adapters (NA, EU, UK, ANZ)

• 1 x Mounting Bracket

• 1 x CAT5 Cable

• 1 x Plastic Screwdriver

• 1 x IR Remote Control

• 1 x USB-A to Mini USB-B Cable

• 1 x DB9 to 2.5 mm Serial Adapter Cable

• 1 x IR Receiver

• 4 x Rubber Feet

• 1 x Instruction Manual

Instruction Manual

Requirements

• HDMI® Enabled Video Source Device(s) (e.g. computer, Blu-ray™ player)

• HDMI Enabled Display Device(s) (e.g. television, projector) - one for each Receiver

• AC Electrical Outlet for the Transmitter and each Receiver

• HDMI Cable for Video Source(s) and Display(s)

• 10/100 or Gigabit Networking Devices (e.g. LAN hub, router or switch)

• Network Cable (CAT5/5e/6)

Instruction Manual

Product Diagram

Transmitter Front View

Transmitter Rear View

Control IR In /

Extension IR Out

Port

Function Button

Rotary DIP

Switch

Power

Adapter

Port

HDMI Video

Input Port

Bandwidth

Switch

Resolution

Switch

LAN

Port Serial

(Control)

Port

Instruction Manual

Receiver Front View

Receiver Rear View

Function Button

Power

Adapter

Port LAN

Port HDMI Video

Output Port

Rotary DIP

Switch

Serial (Control)

Port

Control IR In /

Extension IR In

Port

Instruction Manual

Hardware Installation and Conguration

Preparing Your Site

Note: The ST12MHDLNHK HDMI Over IP Extender Kit can use a 10/100 Ethernet LAN or

Gigabit LAN Network (preferred) to extend the signal. Maximum supported distance

between two Ethernet devices is 100 meters.

Note: Always use the included Universal Power Adapters.

Ensure the Transmitter and Receiver(s) are all situated near an available AC Electrical

Outlet.

1. Determine where the HDMI Enabled Video Source (e.g. computer, Blu-ray Player) will

be located and set up the device.

2. Determine where the HDMI Enabled Display Device will be located and place or

mount the display appropriately.

3. (Optional) If using additional Receivers (ST12MHDLNHR), determine where the

HDMI Enabled Display Device(s) will be located and place or mount the displays

appropriately.

Point-to-Point Installation without a LAN Network

1. Install the Transmitter

a) Position the Transmitter near the HDMI Enabled Video Source Device.

b) Connect an HDMI cable from the Source Device (e.g. computer, Blu-ray Player) to

the HDMI Video Input Port on the Transmitter.

c) Connect the Transmitter to an AC Electrical Outlet using the Universal Power

Adapter.

2. Install the Receiver

a) Position the Receiver near the HDMI Enabled Display Device.

b) Connect an HDMI cable from the video input on the HDMI Enabled Display

Device to the HDMI Video Output Port on the Receiver.

c) Connect the Receiver to an AC Electrical Outlet using the Universal Power

Adapter.

Note: The Rotary DIP Switch on the Transmitter and Receiver must be set in the

same position for the devices to communicate.

3. Connect the Transmitter to the Receiver

a) Connect an RJ-45 terminated CAT5/5e/6 Ethernet cable to the LAN Port on the

Transmitter.

Instruction Manual

Note: If you are using surface cabling, ensure you have enough CAT5/5e/6

unshielded twisted pair (UTP) network cabling to connect the Transmitter to the

Receiver’s location, and that each end is terminated with an RJ-45 connector.

If you are using premises cabling, ensure that the CAT5/5e/6 unshielded twisted

pair (UTP) network cabling between the Transmitter and Receivers has been

properly terminated in a wall outlet in each location and there is a patch cable

long enough to connect the Transmitter and Receivers to their respective outlets.

b) Connect the other end of the CAT5/5e/6 cable to the RJ-45 connector on the

Receiver.

4. Your source video image will now appear on the Receiver’s attached video

displays.

Point-to-Multipoint Installation with a LAN Network

1. Install the Transmitter

a) Position the Transmitter near the HDMI Enabled Video Source.

b) Connect an HDMI cable from the HDMI Video Input Port on the Transmitter to the

video output on the Source Device (e.g. computer, Blu-ray Player).

c) Connect the Transmitter to an AC Electrical Outlet using the Universal Power

Adapter.

2. Install the Receivers

a) Position the Receiver(s) near the HDMI Enabled Display Device(s).

b) Connect an HDMI cable from the video input on the HDMI Enabled Display

Device to the HDMI Video Output Port on the Receiver.

c) Connect the Receivers to AC Electrical Outlets using the Universal Power

Adapters.

Note: The Rotary DIP Switch on the Transmitter and Receivers must be set in the

same position for the devices to communicate.

3. Connect the Devices to a LAN Network

Note: If you are using surface cabling, ensure you have enough CAT5/5e/6

unshielded twisted pair (UTP) network cabling to connect the Transmitter to the

LAN hub, router, or switch.

If you are using premises cabling, ensure that the CAT5/5e/6 unshielded twisted

pair (UTP) network cabling between the Transmitter and LAN hub, router, or

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere StarTech.com Extender Handbücher

StarTech.com

StarTech.com 8STST12MHDLAN Bedienungsanleitung

StarTech.com

StarTech.com 8STST121HDBT20S Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB204EXTFIB Bedienungsanleitung

StarTech.com

StarTech.com ST121UTP Bedienungsanleitung

StarTech.com

StarTech.com 8STUSB2001EXTV Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB201EXT Bedienungsanleitung

StarTech.com

StarTech.com USB2004EXTV Bedienungsanleitung

StarTech.com

StarTech.com USB2001EXT2 Bedienungsanleitung

StarTech.com

StarTech.com ST121DVI25 Bedienungsanleitung

StarTech.com

StarTech.com ST121UTP Bedienungsanleitung

StarTech.com

StarTech.com ST121HDBTE Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB221EXT Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB100EXT Bedienungsanleitung

StarTech.com

StarTech.com ST124HDBT Bedienungsanleitung

StarTech.com

StarTech.com ST121UTPDVI Bedienungsanleitung

StarTech.com

StarTech.com USB2001EXTV Bedienungsanleitung

StarTech.com

StarTech.com ST1218T Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB201EXT Bedienungsanleitung

StarTech.com

StarTech.com ST121HD20V Bedienungsanleitung

StarTech.com

StarTech.com USBthere USB204EXT Bedienungsanleitung

StarTech.com

StarTech.com ST121HDBT20L Bedienungsanleitung

StarTech.com

StarTech.com ST121UTPHDMI Bedienungsanleitung

StarTech.com

StarTech.com ST121HDFXA Bedienungsanleitung

StarTech.com

StarTech.com SV565UTPU Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung