StarTech.com VS440HDMI Bedienungsanleitung
Manual Revision: 04/06/2020
User Manual
For the latest information and specications visit
www.startech.com/VS440HDMI
4x4 HDMI Matrix Video Switch Splitter | RS232
Actual product may vary from photos
SKU#: VS440HDMI
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdierentfromthatto
whichthereceiverisconnected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiringterminationsshouldnotbemadewiththeproductand/or
electriclinesunderpower.
• Cables(includingpowerandchargingcables)shouldbeplacedand
routedtoavoidcreatingelectric,trippingorsafetyhazards.
Mesures de sécurité
• Lesterminaisonsdecâblâgenedoiventpasêtreeectuéeslorsquele
produitet/oulescâblesélectriquessontsoustension.
• Lescâbles(ycomprislescâblesd’alimentationetdechargement)
doiventêtreplacésetacheminésdefaçonàévitertoutrisque
électrique,dechuteoudesécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでくださ
い。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• Iterminialideilielettricinondevonoessererealizzateconilprodotto
e/olelineeelettrichesottotensione.
• Icavi(inclusiicavidialimentazioneediricarica)devonoessere
posizionatiestesiinmododaevitarepericolidiinciampo,rischidi
scosseelettricheopericoliperlasicurezza.
Säkerhetsåtgärder
• Monteringavkabelavslutningarfårintegörasnärproduktenoch/eller
elledningarnaärströmförda.
• Kablar(inklusiveelkablarochladdningskablar)skadrasochplaceraspå
såsättattriskförsnubblingsolyckorochandraolyckorkanundvikas.
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................2
Product Diagram....................................................................................4
Front View.................................................................................................................................................... 4
Rear View...................................................................................................................................................... 5
Product Information..............................................................................6
Package Contents ..................................................................................................................................... 6
Requirements ............................................................................................................................................. 6
Installation ..............................................................................................7
Hardware Installation .............................................................................................................................. 7
Connecting the IR Extender (Optional)............................................................................................. 9
Connecting an RS232 Control (Optional)......................................................................................... 9
Function Buttons....................................................................................10
Software Installation .............................................................................11
AV Matrix Software ................................................................................................................................... 11
Mapping the Output Ports to an Input Port.................................................................................... 13
Disconnecting/Disabling Video Output............................................................................................ 15
Saving/Loading Stored Proles............................................................................................................ 15
Troubleshooting.....................................................................................16
Specications..........................................................................................17
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
1Output Port Buttons
2Input Port Buttons
3IR Receiver
4Function Buttons
5LCD Display
2
1
43 5
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rear View
1RS232 DB9 Port
2DC Power Port
3IR Extender Port
4HDMI Input Ports
5HDMI Output Ports
2
1
345
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
• VS440HDMI Video Switch x 1
• IR Extender Module x 1
• Remote Control x 1
• Rack Mounting Brackets x 2
• Screws for Rack Mount Brackets x 6
• DB9 RS232 Cable x 1
• Universal Power Adapter x 1
• Software Installation CD x 1
• AAA Batteries x 2
Requirements
• HDMI Video Source Device(s) (e.g. computer, game console,
PVR/DVR, etc)
• HDMI Display Device(s) (e.g. monitor, projector, HDTV, etc)
System
• Microsoft®Windows®2000/XP/Vista/7 (32/64-bit), 32MB RAM,
10MB storage space, CD-ROM drive, RS232 serial port
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Hardware Installation
1. Make sure that all connected Devices are powered o
before beginning installation.
2. Connect an HDMI Cable(s) to the HDMI Output Port(s) on
the Matrix Switch and the other end to an HDMI port on an
HDMI Display Device(s).
Connecting Display Devices
3. Connect an HDMI Cable(s) to the HDMI Input Port(s) on
the Matrix Switch and the other end to an HDMI port on the
HDMI Video Source Device(s).
Connecting Video Source Devices
4. Select the appropriate regional Power Cord and connect it
to the Universal Power Adapter.
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5. Connect the Universal Power Adapter to the DC Power
Port on the Matrix Switch and the other end to an AC
Electrical Outlet.
6. Turn on the connected HDMI Display Device(s) and then
the HDMI Video Source Device(s).
7. The LCD Display on the Matrix Switch will activate,
displaying the current status and Input-to-Output display
relationships.
LED Display
Note: The top row of the LCD Display lists the HDMI Dis-
play Devices connectd to an Output Port (4). The bottom
row lists the HDMI Video Source Devices connected to the
Input Ports (2). If a 0 appears this means that there is no
HDMI Video Source Device connected to that Input Port.
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Connecting the IR Extender (Optional)
• Connect the IR Extender to the IR Extended Port on the
Matrix Switch. Position the IR Extender so that the Remote
Control has an unobstructed view/path to the IR Extender.
Connecting the IR Extender
Connecting an RS232 Control (Optional)
• Connect a DB9 RS232 Cable to the RS232 DB9 Port on the
Matrix Switch and the other end to the RS232 port on the
Host Computer.
Connecting a RS232 Control
Andere Handbücher für VS440HDMI
1
Inhaltsverzeichnis
Andere StarTech.com Medienkonverter Handbücher
StarTech.com
StarTech.com DVI2HDMI Bedienungsanleitung
StarTech.com
StarTech.com MCM110ST Bedienungsanleitung
StarTech.com
StarTech.com MCMGBSC15 Bedienungsanleitung
StarTech.com
StarTech.com SDI2HD Bedienungsanleitung
StarTech.com
StarTech.com ET91000LC Systemhandbuch
StarTech.com
StarTech.com MCHD2VGA Bedienungsanleitung
StarTech.com
StarTech.com ET91000SM40 Bedienungsanleitung
StarTech.com
StarTech.com ET1110PSE Systemhandbuch
StarTech.com
StarTech.com VGA2TV2WAY2 Bedienungsanleitung
StarTech.com
StarTech.com ET10GSFP Bedienungsanleitung
StarTech.com
StarTech.com VGA2HDU Bedienungsanleitung
StarTech.com
StarTech.com HD2VID2 Bedienungsanleitung
StarTech.com
StarTech.com MCM110SC2 Bedienungsanleitung
StarTech.com
StarTech.com VID2HDCON2 Bedienungsanleitung
StarTech.com
StarTech.com ET91000SC Bedienungsanleitung
StarTech.com
StarTech.com VGA2TV2WAY Handbuch
StarTech.com
StarTech.com ST124HD202 Bedienungsanleitung
StarTech.com
StarTech.com DP2DVIS Bedienungsanleitung
StarTech.com
StarTech.com ET1000SM40LC Systemhandbuch
StarTech.com
StarTech.com MCM1110GSC Bedienungsanleitung
