StarTech.com WALLMOUNTH4 Bedienungsanleitung

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: January 19, 2022 5:41 PM

Product Diagram (WALLMOUNTH4)

Component Function

1Mounting Holes (4) • Mount the Wall-Mount Bracket to a Wall.

• Maximum weight capacity = 15 kg (33 lb).

2Cage Nut Holes

• Mount a Patch Panel in the Wall-Mount

Bracket.

• Maximum height = 4U.

3Hinged Side Panel • Access the back of the installed Patch Panel.

Package Contents

• Wall-Mount Bracket x 1

• M6 Screws x 4

• M6 Cage Nuts x 4

• Plastic Washers x 4

• M5-25 Flat-head Screws x 4

• Concrete Wall Anchors x 4

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/WALLMOUNTH4

• Phillips Head Screwdriver x 1

• (Optional) Cage Nut Tool x 1

4U 19in Steel Hinged Wall-Mount Bracket for Patch Panels

Installing the Wall-Mount Bracket

Warnings: If you lack the necessary expertise to attach this product to the wall,

consult a professional to install the Wall-Mount Bracket or to provide specic

mounting instructions for your wall structure.

Make sure that the type of wall structure and mounting hardware that you are using

will properly support the mounted equipment. Failure to do so might result in personal

injury and/or equipment damage. The wall structure should be capable of supporting

at least four times the weight of the mounted equipment.

Do not add equipment to the Wall-Mount Bracket until it is securely attached to the

wall.

Adding Equipment to the Wall-Mount Bracket

Use the included M6 Cage Nuts, Screws, and Plastic Washers to install equipment

into the Wall-Mount Bracket.

1. Insert the Wing (side) of an M6 Cage Nut into the back of the desired Cage Nut

Hole.

2. Apply pressure by hand, or with the Cage Nut Tool, to insert the second Wing of the

M6 Cage Nut into the desired Cage Nut Hole.

3. Repeat steps 1 and 2 to insert the desired number of Cage Nuts for the application.

4. Thread a Plastic Washer over an M6 Screw. Repeat until the desired number of M6

Screws have been prepared.

5. Align the Mounting Holes in the Equipment with the M6 Cage Nuts installed in

steps 1-3.

6. Insert the assembled Screws through the Mounting Holes in the Equipment and

into the M6 Cage Nuts.

7. Tighten the Screws, using a Phillips Head Screwdriver.

Accessing the Back of a Patch Panel

1. While supporting the weight of the Patch Panel, use a Phillips Head Screwdriver

to unscrew two M6 Screws from the Cage Nuts, leaving the other two M6 Screws

attached to the Hinged Side Panel.

Note: Make sure that there is enough clearance for the Patch Panel to free swing

away from the Wall-Mount Bracket, before accessing the back of the Patch Panel.

2 3

2. Gently swing the Patch Panel away from the Wall-Mount Bracket to gain access to

the back of the Patch Panel.

3. Reattach the two M6 Screws removed in step 1.

Product Dimensions

Warnings

• Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage.

This product can support the following weight: 15 kg (33 lb.).

• Make sure that the surface that you are attaching this product to can safely support the combined weight of the

equipment and all of the hardware and components.

• Wall structures vary, and it is important to make sure that the type of wall structure and mounting hardware that you are

using will properly support the mounted equipment. Failure to do so might result in personal injury and/or equipment

damage. The wall structure should be capable of supporting at least four times the weight of the mounted equipment

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Andere StarTech.com Rack & Stand Handbücher

StarTech.com

StarTech.com SHELF-2U-14-CENTER-V Bedienungsanleitung

StarTech.com

StarTech.com ARMDUALPIVOT Bedienungsanleitung

StarTech.com

StarTech.com CMDUCT2U Bedienungsanleitung

StarTech.com

StarTech.com RK219WALVO Bedienungsanleitung

StarTech.com

StarTech.com CABSHELF22 Bedienungsanleitung

StarTech.com

StarTech.com ARMWALLDS Bedienungsanleitung

StarTech.com

StarTech.com 8STARMSTSCP1 Bedienungsanleitung

StarTech.com

StarTech.com ARMPIVOT Bedienungsanleitung

StarTech.com

StarTech.com ARMUNONB1 Bedienungsanleitung

StarTech.com

StarTech.com ARMWALLDS2 Bedienungsanleitung

StarTech.com

StarTech.com ARMSLIMDUO Bedienungsanleitung

StarTech.com

StarTech.com 841RACKBRKT Bedienungsanleitung

StarTech.com

StarTech.com ST121MOUNT Bedienungsanleitung

StarTech.com

StarTech.com MONSTADQI Bedienungsanleitung

StarTech.com

StarTech.com LAPTOP-ARM-TRAY Bedienungsanleitung

StarTech.com

StarTech.com ADJSHELFHDV2 Bedienungsanleitung

StarTech.com

StarTech.com 4UDRAWER Bedienungsanleitung

StarTech.com

StarTech.com ARMPIVSTND Bedienungsanleitung

StarTech.com

StarTech.com RK630WALVS Bedienungsanleitung

StarTech.com

StarTech.com CMDUCT2U2 Bedienungsanleitung

StarTech.com

StarTech.com 4POSTRACK42 Bedienungsanleitung

StarTech.com

StarTech.com WALLSHELF8U Bedienungsanleitung

StarTech.com

StarTech.com PROJCEILMNT2 Bedienungsanleitung

StarTech.com

StarTech.com RK4OD Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung