STARTEK FM220U Bedienungsanleitung
Contents
1. Overview........................................................................ 1
2. Features......................................................................... 1
3. Applications .................................................................. 1
4. Specifications and System Requirements ................. 2
5. Driver Installation ......................................................... 3
6. Fingerprint Matching.................................................... 5
7. How To Use Your Fingerprint Reader........................... 6
8. How To Scan Your Fingerprint Reader......................... 7
9. How To Care For Your Fingerprint Reader ................. 9
10. About Fingerprint Privacy ........................................... 9
11. Q and A........................................................................ 10
FM220U User Guide Doc. FM220U_Win_1.0
1
1.
Overview:
FM220U is a high quality CMOS-based
optical reader. It captures images and
verifies fingerprints with high speed.
FM-220U has been widely used in
system wide enrollment and verification
applications as a stand-alone or
embedded device.
2.
Features:
•
ISO compliant
•
Low image distortion –under 1%.
•
Fast scanning & matching speed
•
Options to set different security levels for different application FRR/FAR
demand
•
Small fingerprint data template size
•
Real-life applications - no problem in verifying smeared, scarred,
stained and smudged fingers
•
Support verification on various OS platforms
3.
Applications:
•
Verification for Welfare Distribution
•
Retail or Banking POS
•
Workforce/School attendance management
•
Internet Service Provider (ISP) Logon and Logical access control
•
E-shopping/procurement
•
Healthcare clinic applications for patients health records access
management
•
E-banking, e-KYC applications.
•
E-workflow/ERP (Enterprise Resource Planning)
•
Voters verification
•
Club membership management
FM220U User Guide Doc. FM220U_Win_1.0
2
4.
Specifications and System Requirements
4.1 Specifications
Parameter
Value
Unit
Sensors
CMOS
-
Scanning
1/15
s
Image resolution
500
DPI
Image capture format
13.3 x 16.4
mm
Scanner output image size
264 x 324
Pixels
Gray Level
8bits/pixel, max 256 gray scales
-
Image ratio of length to width
1:1
-
Power supply
Fingerprint Sensing
200
mA
Standby mode
60
mA
Interface
USB2.0
-
Dimension
80 x 41 x 40
mm
Weight
100
g
Distortion
<1
%
Temperature
(without external enclosure)
0~50
°C
Humidity(non-condensing)
<90%
-
Scanning light
source((940nm))
Infrared red
-
Operating volts(USB
connector)
5
V
ESD
15
KV
4.2 System Requirements
USB 2.0 port, 256MB RAM
If you are installing an application based on platforms other than Windows,
such as Android or Linux, please refer to the documentation provided by
the maker of the application program.
FM220U User Guide Doc. FM220U_Win_1.0
3
5.
Driver Installation
Install the driver before using the Startek fingerprint reader.
To manually install device drivers
You may download the Windows device driver from the link we provided.
Step1. Enter “Control Panel”.
Step2. Select “Device Manager”.
Step3. Select “FM-220”. Right click and select “Update Driver Software…”
FM220U User Guide Doc. FM220U_Win_1.0
4
Step4. Choose “Browse my computer for driver software”.
Step5. Unzip fm220_driver_ver_1.9.zip, and select driver path
“fm220_driver_ver_1.9\” and press OK.
Step6. Driver install success! You can try our demo program
on Windows now.
.
FM220 User Guide Doc. FM220_Win_1.0
5
6. FINGERPRINT MATCHING
Step1. Install “FM220 Demo Program.”
Step2. Select“FM220 Demo Program “and left click and select” FM220ISODemo.”
Step3. Press the Snap and GetTemplate botton to check the fingerprints quality.
It is recommended to use the index finger or the middle finger for optimal fingerprint
recognition performance.
FM220 User Guide Doc. FM220_Win_1.0
6
Step4. Follow the diagram instructions to Enroll clear fingerprints into the Host
Device or PC. Press and release the finger for three times as indicated.
Step5. Press the Match button to begin matching the fingerprints of a user whose
fingerprint data has been stored in the system. Press and remove the finger.
Upon successful matching with the user’s stored fingerprints, information is
displayed with a score. When the captured fingerprint image size is 256x324,
a score of 1500 and above ensures a security level with
minimum FAR 1/100,000th and FRR 1/100.
Step6. Press the Match button again to match the fingerprints by pressing
another finger which is not enrolled. Upon failed match, information is displayed
with a low score.
FM220 User Guide Doc. FM220_Win_1.0
7
7. How to Use Your Fingerprint Reader?
For best results:
Why the image quality is important?
Startek fingerprint recognition technology is based on minutiae-only: the unique
feature points of a fingerprint. After a fingerprint is scanned, minutiae are extracted
and processed into a template that will be used for biometric enrollment and
matching. If the scanned fingerprint is unclear or does not have enough contrast,
the minutiae may be inconsistently sampled, resulting in less accuracy and poor
performance. Certain environments and skin conditions, such as wet or dry skin,
can initially cause a fingerprint to appear too light or too dark.
Proper placement is the key to good results?
Startek fingerprint extraction algorithm is capable of extracting the correct minutiae
even without benefit of a perfect print. However, the proper placement of your
finger while scanning can help give more consistent results for any biometric
application. The suggestions below will help you get the best quality fingerprint to
ensure better performance and reduce the chances for failure to enroll or match
correctly.
8. How to scan your finger?
Place the pad of your finger at the center of the sensor
The pad is the fleshy part of the finger, located in the middle of the first segment.
Place the pad (not the tip) such that it covers the sensor area with maximum
contact. Be sure that the core of the fingerprint is scanned.
FM220 User Guide Doc. FM220_Win_1.0
8
Try to match the fingerprints by rotating 30 degree on the sensor area or to
exceed the sensor area. Upon successful matching with the user’s stored
fingerprints, information is displayed with a score. However, the score you get
is expected to be lower than the one you press it normally because there are
fewer minutiae points captured.
Inhaltsverzeichnis
Andere STARTEK Scanner Handbücher
