Stelpro BA Series Bedienungsanleitung

INSBA1T10815

For further information or to consult this guide online, please visit our website at www.stelpro.com

STELPRO DESIGN INC. | Saint-Bruno-de-Montarville | Québec | J3V 6L7

HIGH-END BASEBOARD | BA SERIES

BUilt-in thermostat installation

BA1T1 SERIES - SINGLE POLE

Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future

reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.

The following instructions must be adhered to in order to avoid personal and serious injuries, property damages and potentially fatal electric shocks.

Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.

Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).

WARNING

1. Remove the front cover of the baseboard. Unscrew the two ends

and remove the cover by pulling the bottom out and up.

2. With the help of a drill with a 1/2 in. bit, drill the end of the baseboard

cover on the side where the thermostat will be installed. To do

so, drill from the inside towards the outside lining up with the top

circle. (FIG. 1)

3. Install the thermostat bracket onto the thermostat using the small

screws provided. (FIG. 2)

4. Remove the knockout (KOE) from the side of the junction box.

(FIG. 3)

5. Place the thermostat in position, make sure the thermostat shaft

is lined up with the knockout hole. (FIG. 4) Fix the bracket on the

junction box frame from the outside towards the inside.

6. Connect one of the black thermostat wires to the wire that

comes out of the wire way (at the bottom of the unit) by using an

appropriate wire nut. (FIG. 5)

7. Connect the other black thermostat wire to the line feed wire by

using an appropriate wire nut. (FIG. 6)

8. Close the junction box and replace the cover, making sure the

wires are well placed inside the box.

9. Insert the knob through the hole on the front cover, in line with the

thermostat shaft.

FIG. 1

FIG. 5

FIG. 6

FIG. 4

FIG. 3

FIG. 2

INSBA2T10815

For further information or to consult this guide online, please visit our website at www.stelpro.com

STELPRO DESIGN INC. | Saint-Bruno-de-Montarville | Québec | J3V 6L7

Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future

reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.

The following instructions must be adhered to in order to avoid personal and serious injuries, property damages and potentially fatal electric shocks.

Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.

Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).

WARNING

1. Remove the front cover of the baseboard. Unscrew the two ends

and remove the cover by pulling the bottom out and up.

2. With the help of a drill with a 1/2 in. bit, drill the end of the baseboard

cover on the side where the thermostat will be installed. To do

so, drill from the inside towards the outside lining up with the top

circle. (FIG. 1)

3. Install the thermostat bracket onto the thermostat using the small

screws provided. (FIG. 2)

4. Remove the knockout (KOE) from the side of the junction box.

(FIG. 3)

5. Place the thermostat in position, make sure the thermostat shaft

is lined up with the knockout hole. (FIG. 4) Fix the bracket on the

junction box frame from the outside towards the inside. Bend the

male connectors on thermostat as needed.

6. Connect one of the black thermostat wires to the wire that

comes out of the wire way (at the bottom of the unit) by using an

appropriate wire nut. (FIG. 5)

7. Connect the other black thermostat wire to the line feed wire by

using an appropriate wire nut. (FIG. 6)

8. Connect one of the red thermostat wires to the element wire

(thermal protection wire for a right side junction box installation) by

using an appropriate wire nut. (FIG. 7)

9. Connect the other red thermostat wire to the line feed wire by

using an appropriate wire nut. (FIG. 6)

10. Close the junction box and replace the cover, making sure the

wires are well placed inside the box.

11. Insert the knob through the hole on the front cover, in line with the

thermostat shaft.

FIG. 1 FIG. 5

FIG. 6

FIG. 7

FIG. 8

FIG. 4

FIG. 3

FIG. 2

HIGH-END BASEBOARD | BA SERIES

BUilt-in thermostat installation

BA2T1 SERIES - DOUBLE POLE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stelpro Thermostat Handbücher

Stelpro

Stelpro STE241 Bedienungsanleitung

Stelpro

Stelpro STE402NP Bedienungsanleitung

Stelpro

Stelpro B1T1ER Bedienungs- und Wartungshandbuch

Stelpro

Stelpro STE302NP Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro STCP Bedienungsanleitung

Stelpro

Stelpro STE302R2+ Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Stelpro

Stelpro B1T1 Series Bedienungsanleitung

Stelpro

Stelpro STE302P Bedienungsanleitung

Stelpro

Stelpro STZW402+ Bedienungsanleitung

Stelpro

Stelpro B2T1 Series Bedienungsanleitung

Stelpro

Stelpro STE302PA Bedienungsanleitung

Stelpro

Stelpro STE252NP+ Bedienungsanleitung

Stelpro

Stelpro STE402P Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro Maestro SMT402AD Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro Maestro SMT402 Bedienungsanleitung

Stelpro

Stelpro 360 comfort D070 Bedienungsanleitung

Stelpro

Stelpro STCNP - 5mA Bedienungsanleitung

Stelpro

Stelpro STE403NP Bedienungsanleitung

Stelpro

Stelpro T12 Series Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung