STMicroelectronics SPC58NHADPT302S Bedienungsanleitung
Introduction
The SPC58NHADPT302S Rev.A evaluation board supports STMicroelectronics SPC58NH92 microcontroller in FPBGA
17X17X1.8 302.
Figure 1. SPC58NHADPT302S Rev.A
Note: picture is not contractual.
SPC58NHADPT302S Rev.A evaluation board
UM2725
User manual
UM2725 - Rev 1 - June 2020
For further information contact your local STMicroelectronics sales office.
www.st.com
1Overview
The SPC58NHADPT302S Rev. A mini module is an evaluation board supporting STMicroelectronics SPC58NH92
microcontroller in FPBGA 17X17X1.8 302 package (FPBGA 17X17X1.8 302 2R20+10+2R14+52 B0.55 P0.8).
This mini module is designed to be connected onto the SPC58XXMB motherboard, offering a mechanism for easy
customer evaluation of the supported devices, and to facilitate hardware and software development.
The mini module may be used as a stand-alone unit allowing access to the CPU, but not to access to the I/O pins
nor any motherboard peripherals.
1.1 Package contents
An SPC58NHADPT302S Rev. A adapter package includes the following items:
• SPC58NHADPT302S Rev. A mini module
• Mini CD with user manual and schematics
1.2 Supported devices
The SPC58NHADPT302S Rev. A mini module supports the SPC58NH family of microcontrollers in FPBGA
17X17X1.8 302.
UM2725
Overview
UM2725 - Rev 1 page 2/38
2License agreement
The packaging of this evaluation board was sealed with a seal stating, “by breaking this seal, you agree to the
terms and conditions of the evaluation board license agreement, the terms and conditions of which are available
at http://www.st.com/ebla”. Upon breaking the seal, you and STMicroelectronics entered into the evaluation board
license agreement, a copy of which is also enclosed with the evaluation board for convenience.
Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use with
other products and is not suitable for any safety or other commercial or consumer application. This evaluation
board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or implied,
including the implied warranties of merchantability and fitness for a particular purpose.
UM2725
License agreement
UM2725 - Rev 1 page 3/38
3Handling precautions
Please take care to handle the package contents in a manner such as to prevent electrostatic discharge.
Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure
the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.
UM2725
Handling precautions
UM2725 - Rev 1 page 4/38
4Hardware description
4.1 Hardware features
The SPC58NHADPT302S Rev. A mini module board has the following features:
• Connector for external power supplies input (5 V) used in stand-alone mode
• Reset button with driver and led indicator
• Socket for device in FPBGA302 package
• Debug interfaces:
– 14-pin header connector for JTAG interface
– 10-pin header connector for JTAG/LFAST LVDS interface
– 10-pin header connector for SIPI interface
– 38-pin Nexus parallel debug connector
• 40 MHz crystal main oscillator with jumpers to optionally disconnect it
• 8 MHz oscillator with jumpers to optionally disconnect it
• Clock input through SMA connector with jumper to optionally disconnect it
• 2 X Samtec QSH series, 240-way connector to connect mini module to Motherboard
• 1 Gb/s Ethernet port
• HyperRAM and HyperFlash connected to HyperBUS interface
• Embedded eMMC device
• SD/MMC Card Reader
• 3x Header connectors 5x2 with 0.1” (CIS, ISU and AI connectors)
UM2725
Hardware description
UM2725 - Rev 1 page 5/38
4.2 Hardware dimension
The mini module has the following dimensions:
• PCB area: 127 mm x 114.3 mm
• Top components height: 20 mm max
• Bottom components height: 3.5 mm max
• PCB thickness: 1.6 mm
Figure 2. SPC58NHADPT302S Rev. A top component view
UM2725
Hardware dimension
UM2725 - Rev 1 page 6/38
5Power and system configuration
5.1 Power supplies
The mini module can be powered by providing voltages or supplied externally by the 2-Way PCB Screw
Connector (CN1) or supplied by the motherboard.
When the mini module is connected to the mother board (MB), 3V3 and 5V0 are supplied by MB connector
selecting the associated jumpers. In this setup, the external power supply input available on the mini module
should NOT be used.
When the SPC58NHADPT302S Rev. A mini module is used as a stand-alone board, 5V0 voltages must be
supplied externally, 3V3 and 1V2 voltages will be generated internally by specific circuit on the mini module.
The following jumpers are used to configure the power supply (common for all supported devices):
Table 1. Power configuration jumpers
Jumper Description Default Position
J1
5.0V source for J3 pin1 (MB_5.0V_LR or 5.0V_ADC) voltage
configuration:
• 1-2 MB_5.0V_LR
• 2-3 5.0V_ADC
2-3
(5.0V_ADC)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - C3
J2
5V Switching voltage configuration:
• 1-2 5V EXT (External 5V supply)
• 2-3 MB_5.0V_SR (5V from mother board)
2-3
(MB_5.0V_SR)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D4
J3
VDD_HV_ADR_S / VDD_HV_ADV voltage configuration:
• 1-2 5V source from J1 pin2
• 2-3 3.3V_ADC source from J4 pin2
1-2
(5.0V_ADV)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - C3
J4
3V3 source (3.3V and MB_3.3V_SR) voltage configuration:
• 1-2 3.3V (3.3V from Mini module)
• 2-3 MB_3.3V_SR
1-2
(3.3V)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D3
J5
Main mcu supply (VDD_HV_IO_MAIN) voltage configuration:
• 1-2 5.0V_SR (5.0V)
• 2-3 3.3V_SR from J4 pin2 (3.3V)
1-2
(5.0V_SR)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D3
J6
Supply for BALLAST circuit configuration
• 1-2 VDD_HV_IO_MAIN
• 2-3 5.0V_SR
1-2
(VDD_HV_IO_MAIN)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D3
J7
BALLAST CIRCUIT ENABLE
• Closed: enabled
• Open: disable
Closed
(enable)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D2
J8
VDD_LV voltage configuration:
• 2-3 (BALLAST circuit)
• 1-2 (1.2V_SR from J9 pin2)
1-2
(1.2V_SR)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D3
J9
1.2V_SR switching configuration:
• 1-2 MB_1.25V_SR (1.25V from MB)
• 2-3 1.2V (1.2V from Mini module)
2-3
(1.2V from Mini module)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - D3
J16
EXTREG_SEL configuration:
• 1-2 VDD_HV_IO_MAIN
• 2-3 GND
1-2
(H level)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - C3
J27
HPREG_SEL configuration:
• 1-2 VDD_HV_IO_MAIN
• 2-3 GND
1-2
(H level)
Figure 8. Overview of
SPC58NHADPT302S Rev. A mini
module - Top - B3
UM2725
Power and system configuration
UM2725 - Rev 1 page 7/38
5.2 JTAG/LFAST LVDS interface configuration
The following jumpers need to configure the JTAG/LFAST LVDS/SIPI:
Table 2. JTAG/LFAST/SIPI configuration jumpers
Jumper Description Default Position
J10
SIPI pin 3 configuration
• 1-2: RDY
• 2-3: PA14
1-2
(RDY)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B3
J11
TDI_LF configuration
• 1-2: TDI_LF
• 2-3: PA8
1-2
(TDI_LF)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - A3
J12
TDO_LF configuration
• 1-2: TDO_LF
• 2-3: PA9
1-2
(TDO_LF)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - A3
J13
JTAG pin 13 configuration
• 1-2: EVTO
• 2-3: PJ3/PQ4
1-2
(EVTO)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B3
J14
PC1 / ESR0
• 1-2 ESR0
• 2-3 PC1
1-2
(ESR0)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B3
J15
EVTO/ESR0
• 1-2 ESR0
• 2-3 EVTO
1-2
(ESR0)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B3
J31
EVIO/PK10
• 1-2 EVTI
• 2-3 PK10
1-2
(EVTI)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C3
J34
CLKOUT/PE3
• 1-2 PE3
• 2-3 CLKOUT
1-2
(ESR0)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B3
UM2725
JTAG/LFAST LVDS interface configuration
UM2725 - Rev 1 page 8/38
5.3 System clock configuration
The mini module supports the usage of crystal clock sources as well as external clock source:
Table 3. Clock configuration jumpers
Jumper Description Default Position
J20
XTAL32 configuration
• Close: connect pin 2 of 32.768 KHz
crystal (Y2) to XTAL32
Open Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C3
J21
EXTAL32 configuration
• Close: Connect pin 1 of 32.768 KHz
crystal (Y2) to EXTAL32
Open Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C3
J17
EXTAL configuration
• 1-2 Connect pin 2 of 40 MHz crystal
(Y1) to EXTAL
• 2-3 Connect EVB-EXTAL to EXTAL
1-2
(Y1 pin2 to EXTAL)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
J19
XTAL configuration
• 1-2 Connect pin 1 of 40 MHz crystal
(Y1) to XTAL
• 2-3 Connect XTAL to GND
1-2
(Y1 pin1 to XTAL)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
J18
Enable 8 MHz oscillator power supply
• Open – Power off
• Closed – Power on
Open
(Power off)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J22
External 8 MHz clock source
• 1-2 OSC-MOD (from oscillator)
• 2-3 EXTAL-SMA (from SMA
connector)
1-2
(8 MHz from oscillator)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
5.4 Reset circuit
The mini module supports different ways to reset the microcontroller. To use and perform the reset driving there
are different jumpers and switches:
Table 4. Reset configuration jumpers
Jumper Description Default Position
SW1 Reset push button Open Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - A4
J24 Connect the external reset to the reset
driver for ESR0 and PORST pins Close Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - A4
J23 Connect the external reset to ESR0 pin Close Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - A4
J25 Connect the external reset to PORST pin Close Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - A4
UM2725
System clock configuration
UM2725 - Rev 1 page 9/38
5.5 Other Jumpers
Table 5. Other jumpers
Jumper Description Default Position
J29 Testmode settings Close
(10 KΩ down)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B2
5.6 Configuration for pin shared between eMMC & SD Card Reader
The following jumpers need to configure the pin shared between eMMC & SD Card Reader set the jumpers
described in the table below.
Table 6. Pin shared between eMMC & SD Card Reader jumpers
Jumper Description Default configuration Position
J26
Data0 – PJ3-EVTO configuration
• 1-2 D1_SD (SD-CARD)
• 2-3 D1_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
J30
Data1 - PJ4 configuration
• 1-2 D1_SD (SD-CARD)
• 2-3 D1_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J32
Data2 - PH5 configuration
• 1-2 D2_SD (SD-CARD)
• 2-3 D2_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J35
Data3 - PH6 configuration
• 1-2 D3_SD (SD-CARD)
• 2-3 D3_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J28
CLK – PJ2 configuration
• 1-2 CLK_SD (SD-CARD)
• 2-3 CLK_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
J33
FBCLK - PJ0 configuration
• 1-2 FBCLK_SD (SD-CARD)
• 2-3 FBCLK_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J36
CMD - PJ1 configuration
• 1-2 CMD_SD (SD-CARD)
• 2-3 CMD_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
UM2725
Other Jumpers
UM2725 - Rev 1 page 10/38
Inhaltsverzeichnis
Andere STMicroelectronics Hauptplatine Handbücher
STMicroelectronics
STMicroelectronics SPC58XCADPT176S Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32L476 Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32F446RE Bedienungsanleitung
STMicroelectronics
STMicroelectronics SPC570SADPT100S Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32F0 Series Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-ISQ006V1 Bedienungsanleitung
STMicroelectronics
STMicroelectronics L62 Series Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32F4 Series Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32100E-EVAL Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-MKI109V2 Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM3210E-EVAL Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-3DP001V1 Administratorhandbuch
STMicroelectronics
STMicroelectronics STEVAL-IDB005V1 Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-ILL029V1 Bedienungsanleitung
STMicroelectronics
STMicroelectronics LED7707 Montage- und Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-IHM029V1 Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32G081B-EVAL Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-ILL028V1 Bedienungsanleitung
STMicroelectronics
STMicroelectronics STEVAL-LLL002V1 Bedienungsanleitung
STMicroelectronics
STMicroelectronics STM32F4 Series Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
