Stryker Physio Control Lifepak CR2 Bedienungsanleitung

Wireless Setup

Guide

LIFEPAK®

CR2 Deﬁbrillator

with LIFELINKcentral™AED Program Manager

Please ensure the LIFEPAK CR2 Deﬁbrillator is ‘Connected and Ready’ for use in an emergency by

following these simple instructions.

Before You Begin

Determine your debrillator type

Follow the Getting Started Guide provided with the

defibrillator and determine what type of defibrillator you

have:

USB only

Wi-Fi®and USB

Wi-Fi, cellular, and USB

If the defibrillator is USB only, do not attempt this

procedure.

Note: In this guide, the term “AED” (Automated External

Defibrillator) is used to refer to the defibrillator.

Determine your online account type

You should have an account on one of the following

two websites.

LIFELINKcentral AED Program Manager, or

LIFENET®System

Many health care organizations have existing LIFENET

System accounts to manage their devices. If your

organization has a LIFENET System account, do not

use this setup guide. Instead, log in to your account

and download the Wireless Setup Guide for

LIFEPAK CR2 defibrillators from the Resource Center.

If you do not have a LIFENET System account, follow

this setup guide and use LIFELINKcentral AED Program

Manager to set up your AED.

Wireless Setup Overview

A typical wireless setup takes 10-20 minutes.

The following pages will guide you through these steps:

Download a software application from a website to your

computer.

Run the application on your computer to load Wi-Fi

network settings into the AED.

Connect the AED to the wireless network at its intended

location.

Conﬁrm the AED status in your online account.

Note: Physio-Control recommends that all LIFEPAK CR2 AEDs

with Wi-Fi capability be set up with a Wi-Fi network, even if the

AED also has cellular capability.

Pre-installation Checklist

a. Set up your LIFEPAK CR2 Deﬁbrillator (AED) as

instructed in the Getting Started Guide and verify the

Readiness indicator is ﬂashing.

b. Conﬁrm that the intended location for the AED has a

good connection to the Wi-Fi network.

Test the signal strength of the Wi-Fi network at the

intended AED location using a different Wi-Fi device

such as a smartphone.

c. Identify the Wi-Fi network information you will need to

connect the AED to the network.

NETWORK NAME:

SECURITY KEY:

d. Conﬁrm that you have a PC with internet access and

Windows®7 or above operating system. You will need

Administrator rights on the PC.

e. Locate the USB cable included in the shipping box.

FAQs

Q: I need to set up multiple AEDs at locations that have dierent Wi-Fi networks. What should I do?

A: In step c above, identify the network information for each Wi-Fi network.

Q: I want to skip the Wi-Fi setup and only test the cellular connection. How do I do that?

A: Skip steps b through e above, and begin this procedure at step 4.

1Log in to your LIFELINKcentral AED Program Manager account.

Use the logon name and password from your

“Welcome to LIFELINKcentral” email to log in.

FAQs

Q: I did not receive an email with my logon name and password. What should I do?

A: Check to see if the email was sent to another person in your organization. If you cannot ﬁnd the email,

look up the appropriate web address for your country in the contact list included with this guide. Go to

the website to create your account.

2a. Select Resource Center and then select

Wi-Fi Conﬁguration Tool.

Download and install the Wi-Fi Conguration Tool to your PC.

b. Click the icon in the upper right corner

of the screen to download the Wi-Fi

Conﬁguration Tool.

FAQs

Q: My computer rebooted during the installation process. Is this okay?

A: Yes. If your computer reboots, installation should continue automatically.

d. When you see the InstallShield Wizard

Completed screen, make sure the Launch

Wi-Fi Conﬁguration Tool checkbox is selected,

and then click Finish.

c. After the Wi-Fi Conﬁguration Tool

has downloaded, double-click the

WCT.xxxxx_Setup.exe ﬁle to install it.

If you don’t see the ﬁle, look in your

Downloads folder.

If any security warnings appear, select the

option to allow the ﬁle.

The InstallShield Wizard will appear.

Select your language and click Next>.

b. When you are instructed to Connect LIFEPAK CR2

to Computer, use the USB cable included in the

shipping box.

c. Continue to follow all onscreen instructions and

click Next.

3a. In the Registration screen, select your

country and enter your user name and

password. This is the same logon name

and password you use to log in to

LIFELINKcentral AED Program Manager.

Run the Wi-Fi Conguration Tool and follow the onscreen instructions.

This step loads your Wi-Fi network settings into the AED.

e. When the Wi-Fi setup is complete, you will

see the Update Successful screen.

f. Click Next, disconnect the USB cable, and

then click Close.

d. In the Specify Wi-Fi Network Settings screen,

select a network or click Add Custom Network

to enter your Wi-Fi network settings. Click Next

to apply the settings.

FAQs

Q: I closed the Wi-Fi Conﬁguration Tool and need to open it again. Where can I ﬁnd it?

A: Open the Start menu on your computer, and open the Physio-Control folder. Click

Wi-Fi Conﬁguration Tool.

4a. Take the AED to its intended location.

b. Open the lid and wait until the voice

prompts start.

c. Immediately press and hold the

LANGUAGE and CHILD MODE buttons

simultaneously until you hear “Device

ready.”

d. Immediately:

Close the lid

Place the AED in its permanent storage location

(for example, cabinet or vehicle)

Close the door of the cabinet or vehicle

The AED will attempt a wireless connection and it must

be in its permanent location during this test.

Take the AED to its intended location and test the wireless connection.

Inhaltsverzeichnis

Andere Stryker Medizinische Geräte Handbücher

Stryker

Stryker Core 5400-050-000 Bedienungsanleitung

Stryker

Stryker Speed-Sheet 6010 Bedienungsanleitung

Stryker

Stryker Secure II 3002 Bedienungsanleitung

Stryker

Stryker LigaSure Impact Bedienungsanleitung

Stryker

Stryker altrix Bedienungsanleitung

Stryker

Stryker 1550 Bedienungsanleitung

Stryker

Stryker 1080 Bedienungsanleitung

Stryker

Stryker Harmonic Ace+7 Bedienungsanleitung

Stryker

Stryker Altrix 8001 Bedienungsanleitung

Stryker

Stryker Power-PRO 2 Handbuch

Stryker

Stryker 1509 Bedienungsanleitung

Stryker

Stryker S3 MEDSURG BED Bedienungsanleitung

Stryker

Stryker 1000 Bedienungsanleitung

Stryker

Stryker Bertec FL13E Series Betriebsanleitung

Stryker

Stryker Excelsior SL-10 PRE-SHARED Handbuch

Stryker

Stryker ST1 6300 Bedienungsanleitung

Stryker

Stryker ComfortGel 2850-000-016 Bedienungsanleitung

Stryker

Stryker Reprocessed Stanley Bed Alarm Sensor Pad Bedienungsanleitung

Stryker

Stryker IsoFlex LAL 2860 Handbuch

Stryker

Stryker 3002 Bedienungsanleitung

Stryker

Stryker Sidne Betriebsanleitung

Stryker

Stryker Neptune 2 ROVER ULTRA Bedienungsanleitung

Stryker

Stryker System 6 6208 Bedienungsanleitung

Stryker

Stryker PneumoSure Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung

Romet

Romet R210 Bedienungsanleitung