Stryker SYNK 4K Wireless System Bedienungsanleitung

Transmitter:

Receiver:

0240031065

0240031075

SYNK® 4K Wireless System

DRAFT

Contents

Warnings and Cautions ........................................................................... 1

Warnings.....................................................................................................................1

Cautions......................................................................................................................2

Product Description ................................................................................ 4

Intended Use.............................................................................................................4

System Features....................................................................................... 6

SYNK® 4K Wireless Transmitter Front Panel....................................................6

SYNK® 4K Wireless Transmitter Rear Panel......................................................7

SYNK® 4K Wireless Receiver Front Panel..........................................................8

SYNK® 4K Wireless Receiver Rear Panel............................................................9

Setup ......................................................................................................10

Device Compatibility........................................................................................... 10

Mounting the Receiver on a Display.............................................................. 11

Connecting Power from the AC Adapter ..................................................... 13

Connecting Power to the Receiver from a Display................................... 13

Setting up the SYNK®4K Wireless System .................................................... 13

Wireless Conguration.......................................................................... 16

Operation ...............................................................................................17

Pairing the Devices Using a Temporary Token (Blue) .............................. 17

Pairing the Devices Using a Permanent Token (Red)............................... 17

Removing a Permanent Link ............................................................................ 18

Troubleshooting ....................................................................................19

Cleaning .................................................................................................21

Cleaning and Disinfecting the Transmitter, Receiver, and Tokens ...... 21

Materials and Equipment .................................................................................. 22

Maintenance ..........................................................................................23

Inspecting the Transmitter and Receiver ..................................................... 23

Storage ..................................................................................................................... 23

Periodic Maintenance Schedule...................................................................... 23

Service Life.............................................................................................................. 23

Disposal.................................................................................................................... 24

Technical Specications........................................................................25

DRAFT

Electromagnetic Compatibility........................................................................ 28

Symbol Denitions................................................................................ 32

DRAFT

Warnings and Cautions

In this manual, the terms and denitions below apply.

• Warning: Possible injury to the patient or user.

• Caution: Possible damage to the equipment.

• Note: More information to clarify the instructions.

Warnings

To avoid potential serious injury to the user and the patient and/or damage to

this device, please note the following warnings.

1. Read this manual thoroughly and know its contents prior to using the

device.

2. Federal law (United States of America) restricts this device to sale by, or

on the order of, a physician.

3. This system is not suitable for use in the presence of ammable

anesthetic gases.

4. This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20 cm (7.9 inches) between the radiator

and your body.

5. Install this system in an operating room that complies with all applicable

IEC, CEC, and NEC requirements for safety of electrical devices. Any

installation or connection with other devices shall be evaluated for

electrical safety according to the IEC 60601-1.

6. This product is non-sterile and therefore should not be placed in the

sterile eld.

7. Although the device was fully tested at the factory before shipment,

the user should always test it for proper function prior to a surgical

procedure.

8. To achieve grounding reliability, connect the product to an AC adapter

that is connected to a hospital-grade power cord, and ensure the power

cord is plugged into a grounded power outlet. Do not use extension

power cords.

9. To avoid risk of electric shock, use only the hospital-grade power cord

furnished with the receiver and/or transmitter. Disconnect the receiver

and/or transmitter from the power supply to make connections or to

inspect the equipment.

10. Use Stryker HDMI cable only provided with the product. Use of third-

party HDMI cables with the camera console is not recommended due

DRAFT

to potential problems with secure connections or electromagnetic

compatibility. Use the provided HDMI high speed cable (or other Stryker-

approved HDMI cable) with the SYNK® 4K Wireless System.

11. Only connect items that have been specied as part of the SYNK® 4K

Wireless System or that have been specied as being compatible with the

system.

12. To avoid the risk of electric shock, this equipment must only be

connected to a supply mains with protective earth.

13. Do not place any heavy object on the power cord. Damage to the power

cord can cause re or electric shock.

14. Do not put any liquid or solid object into the device. If this occurs, unplug

the device and have it checked by qualied personnel before operating it

any further.

15. Use appropriate caution to prevent contact with uids if the receiver or

transmitter is being used with a power supply in patient environments.

16. To avoid electric shock, do not open the receiver or transmitter housings.

17. Do not modify this equipment without authorization of the manufacturer.

18. Attempt no internal repairs or adjustments not specically detailed in this

operating manual. Refer any adjustments, modications, and/or repairs to

Stryker Endoscopy or its authorized representatives.

19. Do not touch the device and a patient simultaneously, as there is a risk of

electric shock.

20. Do not touch the patient with signal input or output connectors.

Equipment with SIP/SOP connectors should either comply with

IEC60601-1 harmonized national standard or the combination should be

evaluated for safety.

21. For optimal operation of the SYNK® 4K Wireless System, leave a

minimum of 1m (3.3 ft) between any part of the System and portable RF

communications equipment.

22. To prevent tampering, physically secure the device when not in use.

Cautions

To avoid potential damage to this device, please note the following cautions.

1. Carefully unpack the system and check if any damage occurred during

shipment. If damage is detected, refer to the warranty.

2. Do not install the devices near sunlight, excessive dust, mechanical

vibration, or shock.

3. Keep the devices away from equipment that uses strong magnets (i.e.,

large loudspeakers).

DRAFT

4. To ensure electromagnetic compatibility, refer to the“Electromagnetic

Compatibility”section of this manual. The devices must be installed and

operated according to the EMC information provided in this manual.

5. Do not position the devices so that it is dicult to disconnect the power

cords from the supply mains.

6. Connect the devices to a hospital grade receptacle to achieve grounding

reliability.

7. To connect to an international power supply, use an attachment plug

appropriate for the power outlet.

8. Remove the power cord when transporting the devices.

9. Never operate the devices immediately after transportation from a cold

location to a warm location.

10. Power o the devices when they are not in use.

11. Unplug the receiver and transmitter if they are not to be used for an

extended period of time.

12. Pay close attention to the care and cleaning instructions in this manual. A

deviation may cause damage.

13. Changes or modications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

devices.

Note: This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

The user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving unit.

• Increase the separation distance between the units.

• Connect the unit to an outlet on a circuit dierent from that to which

the other unit(s) are connected.

• Consult the manufacturer or eld service technician for help.

The warranty is void if any of these warnings or cautions are disregarded.

These products contain electrical waste or electronic equipment. They must

not be disposed of as unsorted municipal waste and must be collected

separately.

DRAFT

Product Description

The SYNK® 4K Wireless System wirelessly transfers video data from a

transmitter to up to two linked receivers. The transmitter provides an HDMI

input that supports 1080p and 4K video formats, and the receiver provides an

HDMI output supporting the same formats. Once the devices are linked, the

transmitter wirelessly transfers high-denition video to the receiver for output

on a secondary display.

At least one transmitter, one receiver, and a pairing token are required for full

functionality of the system. A link between the transmitter and the receiver(s)

is established by manually inserting a token in the transmitter and then in

the receiver(s). Encrypted network data is written onto the token from the

transmitter, and the data is decrypted in the receiver to establish a private

and secure connection. A token is a small memory device that is programmed

with frequencies allowed to establish a link.

The receiver can optionally be mounted to the back of the 32” 4K Surgical

Display (0240031050), and it comes with the necessary mounting hardware.

A dedicated power supply is included with the transmitter and the receiver

to provide power. Alternatively, a Y-cable is provided with the receiver so it

can share the 32”4K Surgical Display’s power supply (use when the receiver is

mounted to the back of that display).

The system transfers video data without controlling or altering the functions

or parameters of any connected devices.

Intended Use

The SYNK® 4K Wireless System is intended for wireless transmission of high

denition video data to secondary displays in a professional healthcare

setting. The system is a non-sterile reusable device not intended for use in the

sterile eld.

Contraindications

There are no contraindications for these devices.

DRAFT

SYNK® 4K Wireless Transmitter

Package Contents

• (1) SYNK® 4K Wireless Transmitter (0240031065)

• (1) Hospital-grade power cord (0105033001)

• (1) HDMI high speed cable, 2M (P39077)

• (2) Remote cables (0105206758)

• (1) Power supply (P27315)

• (2) Temporary tokens (blue) (0105208884)

SYNK® 4K Wireless Receiver

Package Contents

• (1) Receiver (0240031075)

• (1) Hospital-grade power cord (0105033001)

• (1) Power supply (P27315)

• (2) Shoulder bolts (P44094)

• (1) Y cable (P43614)

• (1) HDMI high speed cable, 2M (P39077)

DRAFT

System Features

This section outlines the features of the SYNK® 4K Wireless Transmitter and

Receiver.

SYNK® 4K Wireless Transmitter Front Panel

124

1. Power switch

(hard)

Powers transmitter ON and OFF.

2. Power Indicator Steady Green - Power is ON

3. Token Status

Indicator

Blinking White - Waiting for normal token

Green - Ready for pairing or Wireless link is

established

Amber - Warning, see Troubleshooting

Red - Error, contact service representative

4. Token Slot Token insertion site used to establish a wireless

connection

5. Token Initializes a wireless connection after insertion into

the transmitter and receiver

Note: The transmitter emits a pairing sound when a wireless link is

established. The transmitter emits a link drop sound when one or both

receiver links have been dropped.

DRAFT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stryker Empfänger Handbücher

Stryker

Stryker WiSe 0240030972 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung