Summit AL55 Bedienungsanleitung

Owner’s Manual

BEFORE USE, PLEASE READ AND FOLLOW

ALL SAFETY RULES AND OPERATING INSTRUCTIONS

BUILT-IN

REFRIGERATOR

BEVERAGE

COOLER

BEVERAGE

COOLER

Model AL55

Model ALBV2466

Model SCR2466B

Felix Storch, Inc.

An ISO 9001:2015 registered company

Summit Appliance Division

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance.com

Write Serial Number here:

_______________________

TABLE OF CONTENTS

Important Safety Instructions ............................................................................... 3 – 4

Installation Instructions ........................................................................................ 5 – 6

Before using your appliance ...............................................................................5

Installation of your appliance ..............................................................................5

Reversing the door swing ................................................................................. 6

Operation ............................................................................................................... 7 – 8

Recommended temperatures for chilling wine .................................................... 7

The controls of your appliance ...................................................................... 7 – 9

Care and Maintenance .............................................................................................. 10

Cleaning your appliance

Defrosting

Power failure

Vacations

Transporting your appliance

Energy-saving tip

Problems with Your Appliance ................................................................................. 11

Limited Warranty ....................................................................................................... 12

IMPORTANT SAFETY INSTRUCTIONS

WARNINGTo reduce the risk of fire, electrical shock or injury when using your

appliance, follow these basic precautions

Read all instructions before using the appliance.

Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, and

do not use an extension cord.

It is recommended that a separate circuit, serving only your appliance, be provided. Use

receptacles that cannot be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or

explosion.

Before proceeding with cleaning and maintenance operations, make sure the power line of the

unit is disconnected.

Do not connect or disconnect the electric plug when your hands are wet.

Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can

result in electrical shock or death.

Do not attempt to repair or replace any part of your appliance unless it is specifically

recommended in this manual. All other servicing should be referred to a qualified technician.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any

other appliance. The fumes can create a fire hazard or explosion.

Use two or more people to move/install the appliance. Failure to do so can result in back or other

injury.

To ensure proper ventilation for your appliance, the front of the unit must be completely

unobstructed. Choose a well-ventilated area with temperatures above 61°F (16°C) and below 95°F

(35°C). This unit must be installed in an area protected from the elements, such as wind, rain,

water spray or drips.

The appliance should not be located next to ovens, grills or other sources of high heat.

The appliance must be installed with all electrical connections in accordance with state and local

codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in accordance with

the National Electrical Code and local codes and ordinances, is required.

Do not kink or pinch the power supply cord of the appliance.

The fuse (or circuit breaker) size should be 15 amps.

It is important for the appliance to be leveled in order to work properly. You may need to make

several adjustments to level it.

Although the unit has been tested at the factory, due to transit and storage, you should clean the

appliance before use.

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may

damage or discolor the interior.

Do not use this apparatus for other than residential purposes.

This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is

environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase

the greenhouse effect. Care must be taken during transportation and setting up of the appliance

that no parts of the cooling system are damaged. Leaking coolant can ignite and may damage the

eyes.

In the event of any damage:

- Avoid open flames and anything that creates a spark,

- Disconnect from the electrical power line,

- Air the room in which the appliance is located for several minutes, and

- Contact the Service Department for advice.

The more coolant there is in an appliance, the larger the room it should be installed in. In the

event of a leakage, if the appliance is in a small room, there is the danger of combustible gases

building up. For every ounce of coolant, at least 325 cubic feet of room space is required. The

amount of coolant in the appliance is stated on the data plate on the back of the appliance. It is

hazardous for anyone other than an authorized Service Person to carry out servicing or repairs to

this appliance.

Take serious care when handling, moving, and using the appliance to avoid either damaging the

refrigerant tubing or increasing the risk of a leak.

Replacing component parts and servicing shall be done by factory authorized service personnel

so as to minimize the risk of possible ignition due to incorrect parts or improper service.

DANGER! Risk of child entrapment

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances

are still dangerous, even if they will “just sit in the garage a few days”.

Before you throw away your old wine cooler or any appliance: Remove the door.

Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the appliance.

- SAVE THESE INSTRUCTIONS -

INSTALLATION INSTRUCTIONS

Before Using Your Appliance

Remove the exterior and interior packing.

Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling during

transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle.

Installation of Your Appliance

This appliance is designed for free standing or built-in (fully recessed) installation. If free standing,

the unit should have at least 4” of clearance at both sides, at the top and at the back to allow for

adequate ventilation. If it is built-in, leave 3/16” at both sides, 1/16” at the top and 2” at the rear. Be

sure that airflow under the appliance is not blocked.

Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level

your appliance, adjust the front leveling legs at the bottom.

Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).

Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.

Extremely cold ambient temperatures may also cause the unit not to perform properly.

Avoid locating the unit in moist areas.

Plug the appliance into an exclusive, properly installed and grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified and authorized products

service center.

The handle is stored inside the unit. Install using the screws (supplied).

Reversing the Door Swing

This appliance has the capability of the door opening from either the left or right side. The unit is

delivered to you with the door opening from the left side. Should you desire to reverse the opening

direction, please follow the instructions below:

To make the reversal, you will find two hardware pieces in a plastic bag inside the appliance: the top

left hinge and the bottom left hinge. The bottom support bracket is used for both sides.

1. Carefully lay the appliance on its back. Use cushioning to protect the floor and appliance.

2. Using a Phillips screwdriver, remove the two screws and bottom right hinge beneath the door.

Keep the hinge in a safe place in case you need to reverse the door again in the future.

3. Carefully slide the door off and place it on a padded surface.

4. Interchange the plastic shaft sleeves at the top of the door.

5. Remove the bottom support bracket from the right side.

6. Remove the top right hinge and keep in a safe place in case you want to reverse the door in the

future.

7. Remove the screws from the top left and transfer to the right.

8. Install the top left hinge.

9. Install the bottom left hinge to the door. Do not over-tighten the screw.

10. Place the door back on the appliance, lining up the top hinge.

11. Install the bottom support bracket.

12. Adjust door alignment. When set, tighten screw on hinge.

13. Remove handle. Transfer the screw hole covers to the left and install the handle on the right.

OPERATION

Recommended Temperatures for Chilling Wine

Red Wines: 15 - 18°C (59 - 64.4°F)

Dry / White Wines: 9 - 14°C (48.2 - 57.2°F)

Sparkling Wines: 5 - 8°C (41 - 46.4°F)

The cabinet temperature may vary slightly depending on whether or not the interior light is ON or OFF,

and whether the bottles are located in the upper/middle or lower section of the cabinet.

The Controls of Your Appliance

The appliance should be placed where the ambient temperature is between 16-35°C (61 - 95°F). If

the ambient temperature is above or below this range, the performance of the unit may be affected.

For example, placing your unit in extremely cold or hot conditions may cause interior temperatures to

fluctuate.

Control Panel

Setting the temperature Control

Model AL55:

Models ALBV2466, SCR2466B:

Adjustable temperature: 2°C to 8°C (36°F

to 46°F)

Adjustable temperature: 1°C to 18°C

(34°F to 65°F)

⚫Set the desired temperature by pressing the corresponding buttons, to increase or

to decrease. Each press is a 1-degree increment or decrement. Once released, set

temperature will flash for approximately 5 seconds, then revert back to display the internal

temperature.

⚫To view your set temperature, press either the or button once and LED display will

flash set temperature for 5 seconds.

⚫The appliance has the capability to display temperature in either Celsius or Fahrenheit. To

change the temperature scale, press and hold both buttons simultaneously for

approx. 3 seconds.

Note: The temperature inside may vary slightly depending on whether or not the interior bulb is

ON or OFF and where the bottles are located.

ECO mode:

Press and hold the button for 3 seconds to enter or exit ECO mode.

In this mode, the interior LED light, the compressor indicator and the temperature value

on the display panel will be turned off and the symbol °will illuminate on the upper left corner

of °C / °F.

Light / Lock

LED lamp brightness mode: with Memory IC (when unit restarts after power failure unit, will

auto recover to last setting), the default brightness is 100%. Each time the button is

pressed, the brightness of the LED will be cycled through the four positions (100%, 75%, 50%,

OFF)

Press and hold for 3 seconds to lock or unlock the control panel.

ON/OFF Power /

Mute

To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.

When the high/low temperature alarm is activated, the buzzer will sound continuously. Press

one time to turn off the alarm.

LOCK

If illuminated, indicates the control panel is locked.

RUN

When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode

is currently in operation.

Demo mode

Press and hold buttons , and simultaneously for 10 seconds to enter or

exit demo mode.

In this mode, the display panel can operate settings, but the temperature is a fixed display

12°C (54°F) and all fans plus the compressor will not start.

Sabbath mode

Press and hold buttons and at the same time for at least 5 seconds to enter or exit

Sabbath mode. In this mode, LED will display "Sb". This mode turns off the displays, interior

light and prevents them from turning on again. Normal cooling operations will still take place.

The compressor and the fan work normally.

When the cabinet power off, it will not automatically exit Sabbath mode, and it will keep

Sabbath mode when power on again. The Sabbath Mode will automatically turn off after 96

hours.

Defrosting

The unit defrosts automatically in normal operating conditions.

The evaporator behind the rear wall of the unit defrosts automatically. Water will drain through

the drain pipe from the back of the product. Users need to bring the water to the drain or find

an appliance to load the water. (If loading with an appliance, you need to pay attention to

clearing the water regularly)

However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high

heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will

require manual defrosting.

Mandatory

defrost mode:

Press the and at one time for 10 seconds to enter the compulsory defrost mode.

NOTE:

If the unit is unplugged or turned off, or if there has been a power failure, you must wait 5 minutes

before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.

When you use the appliance for the first time, or restart it after it has been shut off for a long time,

there could be a few degrees variance between the temperature you select and the one indicated

on the display. This is normal and due to the length of inactivation time. Once the appliance has

been running for a few hours, everything will be back to normal.

Temperature Alarm Function

If the ambient temperature is ≥30°C (86°F) for 2 hours, the high temperature alarm will be activated,

the LED will display "HH", the buzzer will sound continuously, the cooling system continues to work.

The display returns to normal when the high temperature condition is relieved.

If the ambient temperature is <0°C (32°F) for 1 hour, the low temperature alarm will be activated, the

LED will display "LL", the buzzer will sound continuously, the cooling system will stop working. The

display returns to normal when the low temperature is relieved.

NOTE:

It is normal that the cabinet shows “HH” or “LL” from time to time. If it occurs frequently or lasts

for a long time, you can restart the unit by unplugging it, then re-plugging after 5 minutes. If the

problem occurs again after restarting, please contact customer service.

Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your

appliance. If you attempt to start the appliance before the end of this time delay, the appliance

will not turn on.

If you turn on the appliance for the first time or after a restart, or after it has been out of operation

for a long time, there may be a temperature difference between the temperature inside the

appliance and that on the LED display. This is a normal event caused by the duration of the

activation period. Leave the appliance turned on for several hours and the temperature will stabilize

during operation.

CALIFORNIA CARB/SNAP DISCLOSURE

This product uses eco-friendly hydrocarbon refrigerant and fully complies with California

CARB regulations.

However, we are required by California Law to provide the following disclosure statement in every

product sold in California.

"This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited

Substances' for that specific end-use, in accordance with California Code of Regulations, title 17,

section 95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc. and

Felix Storch, Inc. attests, under penalty of perjury, that these statements are true and accurate."

This product does not use any refrigerants on the 'List of Prohibited Substances'"

CARE AND MAINTENANCE

Cleaning Your Appliance

1. Turn off the power, unplug the appliance, and remove all items including shelves and racks.

2. Wash the inside surfaces with a warm water and baking soda solution. The solution should consist

of about 2 tablespoons of baking soda to a quart of water.

3. Wash the shelves with a mild detergent solution.

4. Wring excess water out of the sponge or cloth when cleaning the area of the controls or any

electrical parts.

5. Wash the exterior of the cooler with a warm solution of mild liquid detergent. Rinse well and wipe

dry with a clean soft cloth.

6. For stainless steel surfaces, routine cleaning can be accomplished by using warm water and a

cloth. Dry with a towel or cloth to prevent water spots. Wipe in the directions of the brush lines.

For cleaning that needs more power, you can use a mild detergent in warm water. Make sure to

rinse the surface thoroughly to prevent staining and spotting. Towel dry.

Defrosting

Defrosting of the inside of the appliance occurs automatically during operation. Approximately every 8

hours, the compressor will stop running for about 30 minutes. During defrosting the temperature will

be higher than you set. The defrost water is collected by the evaporating tray above the compressor

and evaporates automatically.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your

appliance if you minimize the number of times the door is opened. If your power is going to be off for

a longer period of time, you need to take the proper steps to protect your contents.

Vacations

Leave the appliance operating during vacations of less than three weeks. If you turn off the appliance

for extended periods, leave the door slightly ajar to prevent odor building up inside.

Transporting Your Appliance

If you need to move your appliance once the box has been discarded:

1. Securely tape down all loose items (shelves) inside your appliance.

2. Turn the adjustable legs up to the base to avoid damage.

3. Tape the door shut.

4. Be sure the appliance stays secure in the upright position during transportation. Also protect the

outside of the appliance with a blanket or similar item.

Energy-Saving Tip

The appliance should be located in the coolest area of the room, away from heat-producing appliances

and out of direct sunlight.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Summit Kühlschrank Handbücher

Summit

Summit FF31L7BI Bedienungsanleitung

Summit

Summit FFAR10 Benutzerhandbuch

Summit

Summit FFBF192SS Bedienungsanleitung

Summit

Summit SP7D2 Bedienungsanleitung

Summit

Summit FF-874 Series Bedienungsanleitung

Summit

Summit SPRF34D Bedienungsanleitung

Summit

Summit FF1386W Bedienungsanleitung

Summit

Summit FF1085SS Bedienungsanleitung

Summit

Summit FF1513SS Bedienungsanleitung

Summit

Summit SCR1536B Bedienungsanleitung

Summit

Summit CP34W Bedienungsanleitung

Summit

Summit CP972SS Bedienungsanleitung

Summit

Summit SCFR70FROST Leitfaden

Summit

Summit CT66BADACSS Bedienungsanleitung

Summit

Summit CP171 Series Bedienungsanleitung

Summit

Summit FF6BI series Bedienungsanleitung

Summit

Summit FF1084W Bedienungsanleitung

Summit

Summit FELIX STORCH FF-6 Bedienungsanleitung

Summit

Summit FF1418DT Bedienungsanleitung

Summit

Summit BDR190NACSS Leitfaden

Summit

Summit FF511LBI Bedienungsanleitung

Summit

Summit SCR600BLBISHWO Leitfaden

Summit

Summit SP6DS2DOS SERIES Leitfaden

Summit

Summit ADRD15 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung