Sun Microsystems SUN-OPM200 Series Bedienungsanleitung
English
User’s Manual
SUN-OPM200 Series
Fiber Optic Power Meter
Table: SUN-UM-TE-OPM004 Version: A/0
All the trademarks mentioned in this manual are registered property of Sun Telecom.
The right to interpret this manual is reserved by Sun Telecom.
F i b e r O p t i c S o l u t i o n s P r o v i d e r i
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
NOTICE
Safety Sign:
When using the optical power meter, always take bask safety precautions to
reduce the harm for the testers, and injury to persons. All the safety sign
may not mark in this manual.
Warning: Prohibited misconduct and operation, to prevent any
improper conduct and operation of the damage.
Notice: notice the important information, notification, and
references, these notice information should be understood.
Safety sign on the instrument:
WEEE Sign: Users of electrical and electronic equipment from
private households should have the possibility of returning
WEEE at least free of charge.
Safety Advice
1. When the tester use Disposable alkaline batteries, do not
charge it. Ensure the correct polarity installation, when
replace the battery.
2. When the products are not in use, please remove the
batteries and kept separate to avoid instrument damage caused by
F i b e r O p t i c S o l u t i o n s P r o v i d e r ii
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
battery leakage. If leakage occurred, Please do not touch.
3. To prevent electric shock, do not open the product case, only the
authorized qualified professionals can do the maintenance; Do not
expose the testers to rain or wet conditions, to avoid the risk of fire or
electric shock
4. Instruments used LCD screen. Do not fall the instrument. If the LCD is
seriously hit, it may cause fluid leakage. And please do not touch.
F i b e r O p t i c S o l u t i o n s P r o v i d e r iii
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
Contents
Chapter 1: Standard configuration.......................................................................1
Chapter 2: Overview............................................................................................1
Chapter 3: Specifications.....................................................................................2
Chapter 4: Function .............................................................................................3
Chapter 5 OPM Software...................................................................................14
Chapter 6 Operation Instruction and Notes.......................................................31
Chapter 7 Troubleshooting ................................................................................51
Chapter 8 General Maintenance........................................................................52
Chapter 9 Quality Warranty ...............................................................................52
F i b e r O p t i c S o l u t i o n s P r o v i d e r 1/54
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
Chapter 1: Standard configuration
No.
Product
Unit
Quantity
1
Optical Power Meter
set
1
2
AA 1.5V Battery
pieces
3
3
Power Adapter
piece
1
4
Soft Bag
piece
1
5
USB Line
piece
1
6
USB Disk
piece
1
7
FC Adapter
piece
1
8
SC Adapter
piece
1
9
ST Adapter
piece
1
Chapter 2: Overview
SUN-OPM200 Series Handheld Optical Power Meter is a newly designed
fiber optic tester, which aims at the installation, engineering acceptance and
maintenance of fiber network.
Compared with other usual power meters, this power meter has more
functions when used with SUN-LS200 Series handheld optical light source,
like automatic wavelength identification, auto wavelength switching,
intelligent backlight, data savage via USB port.
Wave ID - Auto wavelength identification & switching
Frequency ID - Auto frequency identification
2 types of backlight modes, manual or outside light intensity, which
indicated by LED light red or blue color.
Intelligent backlight
1000 records storage or download via USB cable
USB communication port for saved testing records download
Reference power level can be set up and stored
User self-calibrating function
Auto-off function
F i b e r O p t i c S o l u t i o n s P r o v i d e r 2/54
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
Up to 200hrs battery life
Chapter 3: Specifications
Model
SUN-OPM200-TC
SUN-OPM200-BC
Calibration Wavelength (nm)
850/1300/1310/1490/1550/1625
Detector type
InGaAs
Measurement Range (dBm)
-70 ~ +6
-50 ~ +26
Uncertainty (dB)
±0.15 (3.5%)
linearity (dB)
±0.02
Display resolution (dB)
0.01
Frequency ID (Hz)
270, 330, 1K, 2K
Wave ID (nm)
850, 1300, 1310, 1490, 1550, 1625
Date Storage Capacity
1000
Communication Port
USB
Standard Connector
FC /2.5mm universal
Optional Optical Connector
FC/SC/ST Interchangeable/2.5mm
universal
Optional Optical Connector
LC/FC/SC/ST Interchangeable
Alkaline battery
3*AA, 1.5V
Power Adapter (V)
8.4
Battery Operating time (h)
200 without backlight
Operation Temperature (℃)
-10 ~ +60
Storage Temperature (℃)
-25 ~ +70
Dimension (mm)
175*90*44.5
Weight (g)
231
Remark: Battery operating time is based on the condition of the power off the backlight. If
power on the backlight continuously, the operation time will be shorter.
F i b e r O p t i c S o l u t i o n s P r o v i d e r 3/54
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
Chapter 4: Function
4.1 Front
4-1
(1) Power Key
ON/OFF the instrument
Power Saving setting: the unit will automatically shut off after 15 minutes idle
time, whatever in the condition of battery power supply or AC power supply.
Once choose this setting, the “auto-off” will display on the left bottom of the
screen. This power saving is the default setting, once open the power meter,
will enter into this mode. Shortly press the power button to deactivate auto
power saving mode.
F i b e r O p t i c S o l u t i o n s P r o v i d e r 4/54
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
(2) Wavelength Selection/Wavelength Identify
Short press this key to switch the wavelength and display it on the top left of
the LCD screen, 1310nm is the default wavelength
Press the for 2 seconds, enter into wavelength auto-identify, on the
upper right of screen have “AU”, and also long press this key to quit this
function.
(3) Backlight Control (two mode of back light control, press this key to
choose one mode):
“LDR” the intelligent backlight control mode. Power meter will off/on the
backside in 15 seconds based on the outside light condition, and this is
F i b e r O p t i c S o l u t i o n s P r o v i d e r 5/54
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
the default mode back light control key mode. Press to on/off the
back light
(4) Saving/Data-view Key.
Data-saving, can save data records no more than 1000. Press screen
will display the Data saving No., tip saving the data, double press to
confirm the saving.
Data view. Long press to enter into the data view interface, short
press can view the data.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Sun Microsystems Messgerät Handbücher
