Sunbeam HE2300 Bedienungsanleitung

Please read these instructions carefully

and retain for future reference.

Oscillating Twinheat

Ceramic Heater

Instruction Booklet

HE2300 2400W Oscillating Twinheat Ceramic Heater

Sunbeam’s Safety Precautions 1

Safety Precautions for your Heater 2

Sunbeam’s Total Safety System 3

Features of your Oscillating Twinheat

Ceramic Heater 4

Using your Oscillating Twinheat

Ceramic Heater 6

Troubleshooting guide 8

Care and cleaning 8

Contents

Sunbeam are very safety conscious when

designing and manufacturing consumer

products, but it is essential that the product

user also exercise care when using an electrical

appliance. Listed below are precautions which

are essential for the safe use of an electrical

appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug. Remove

by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug

when the appliance is not in use and

before cleaning.

• Do not use your appliance with an extension cord

unless this cord has been checked

and tested by a qualified technician or

service person.

• Always use your appliance from a power

outlet of the voltage (A.C. only) marked

on the appliance.

• Close supervision is necessary when your

appliance is being used near children or

infirm persons.

• Never leave an appliance unattended while

in use.

• Young children should be supervised to ensure

that they do not play with the appliance.

• Do not use an appliance for any purpose

other than its intended use.

• Do not place an appliance on or near a hot gas

flame, electric element or on a heated oven. Do

not place on top of any other appliance.

• Do not let the power cord of an appliance hang

over the edge of a table or bench top or touch

any hot surface.

• For safety reasons and to avoid maintenance

byunskilledpersons,someappliancesare‘sealed’

using tamperproof screws. Such appliances

should always be returned to the nearest

Sunbeam Appointed Service Centre

for adjustment or repair if required.

• Do not operate any electrical appliance with a

damaged cord or after the appliance has been

dropped or damaged in any manner. If damage

is suspected, return the appliance to the nearest

Sunbeam Appointed Service Centre

for examination, repair or adjustment.

• For additional protection, Sunbeam recommend

the use of a residual current device (RCD) with

a tripping current not exceeding 30mA in

the electrical circuit supplying power to your

appliances.

• Do not immerse the appliance in water

or any other liquid unless recommended.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

• This heater becomes hot during use. To avoid

burns, do not let bare skin touch hot surfaces. If

provided, use handles when moving this heater.

Keep combustible materials such as furniture,

pillows, bedding, papers, clothes and curtains

at least 3 feet (90cm) away from the front of the

heater and keep them away from the sides and

rear.

• Extreme caution is necessary when any heater is

used by or near children or invalids and whenever

the heater is left unattended.

• Always unplug the heater when not in use.

• Do not use outdoors.

• Do not run the cord of the heater under

carpeting. Do not cover the cord with throw rugs,

runners or other floor coverings. Arrange the

cord away from traffic areas where it will not be

tripped over.

• Do not locate the heater immediately below a

socket outlet.

• Do not use this heater in the immediate

surrounds of a bath, shower, laundry area or

swimming pool.

• Do not insert or allow foreign objects to enter any

ventilation or exhaust openings as this may cause

electric shock or fire, or damage to the heater.

• To prevent a possible fire, do not block air intakes

or exhaust in any manner. Do not use on soft

surfaces, such as beds, where opening may

become blocked.

• A heater has hot and arcing or sparing parts

inside. Do not use it in areas where petrol, paint

or flammable liquids are used or stored.

• In order to avoid overheating, do not cover the

heater.

Important instructions – retain for

future use.

Safety auto shut off

Your Sunbeam Twinheat Ceramic Heater is

equipped with a safety system that detects

any abnormally high temperatures within

the heater and automatically shuts it off to

prevent overheating.

Thermal back-up fuse

In addition to this automatic cut-off, your

heater contains a thermal back-up fuse to

provide additional back-up protection. If

the heater is in an overheat situation, the

back-up fuse will open, stopping the power

flow to the heating element and fan. This

fuse cannot be reset, so in the event that

the back-up fuse is activated, the heater

will need to be replaced.

Sunbeam’s Total Safety System

Power ON light

Illuminates to indicate that the heater

is connected to the power outlet and

is switched on.

Ceramic element

The 2400 watt ceramic element is more efficient than

other element types as it converts more electricity into

heat that is transferred into the room.

It also self-regulates the energy flow depending on the

temperature for added safety. If the ceramic gets too hot,

electricity cannot pass through it.

Ceramic elements are safer than other element types,

as they operate at temperatures below the ignition

temperature of highly flammable materials like tissue

paper.

Oscillation function

The heater oscillates 70 degrees to provide greater

heat distribution. Simply press the OSC button

(OSC) to activate this function.

Two heat settings

Two heat settings allow you to adjust the heat and

airflow of the heater. When using the thermostat, select

setting 2 to reach the desired heat level more quickly.

Fan setting

Ideal for circulating cool air in summer, the fan setting

operates the fan without heat.

Features of your Oscillating

Twinheat Ceramic Heater

Thermostat dial

The adjustable thermostat allows you

to select the desired heat level, and

automatically switches the heater

on and off to maintain the desired

temperature.

Twin housing

The revolutionary vertical twin housing has

a 90 degree swivel on separate elements to

provide wider heat distribution.

Mode selector dial

The mode selector dial operates the

heater. Select heat setting 1 or 2,

or fan.

•

1.Place the heater on a flat level surface and

ensure that the air intake and outlet are

clear of obstructions.

2.Insert the plug into a 230/240V power

outlet and turn the power on.

3.Turn the thermostat dial to the highest

setting by rotating the dial clockwise as far

as it will turn.

4.Turn the mode dial to the desired heat

setting, I or II.

5.To use the fan without heat, set the

thermostat dial to the lowest setting and

select the fan setting on the mode selector

dial.

Setting the thermostat

1.Set the thermostat to the highest setting by

turning the dial clockwise as far as it will

turn.

2.When the room has reached the desired

temperature level, lower the thermostat

setting by turning the thermostat dial anti-

clockwise until it clicks. The heater will

stop operating.

3.The thermostat is now set and will

automatically maintain the pre-set

temperature level by switching between the

high (II) and low (I) settings.

Note: When set to the high setting it is

normal for the heater to cycle between

high and low as it maintains the preset

temperature. The heat output does not

vary when the heater is set to the low

heat setting (I). To prevent the unit from

cycling, raise the thermostat setting.

Adjusting the swivel housing

The revolutionary vertical twin housing allows

heat to travel in two different directions for

maximum heat distribution.

Carefully rotate each housing to direct the

airflow in the desired direction. Do not swivel

the unit beyond the point of resistance.

Using the Oscillation Function

The 70 degree oscillation function can be

used on any setting.

1.Press the oscillation button (OSC),

positioned on the top of the heater.

The heater will begin to oscillate from

side to side.

2.To stop the heater from oscillating,

simply press the (OSC) button once again.

Using your heater

HE2300 Oscillating Twinheat Ceramic Heater

The revolutionary vertical twin housing direct

the airflow in two directions for maximum

heat distribution.

Carefully rotate each housing to direct the

airflow in the desired direction. Do not swivel

the unit beyond the point of resistance

Adjusting the swivel housing

If your heater fails to operate check the

following:

• Make sure the electrical outlet or circuit

breaker is working.

• Check for obstructions. If you find an

obstruction, turn the heater off and follow

the reset instructions above.

• Check that the thermostat is not set too

low. Turn the thermostat dial clockwise

Troubleshooting guide

Ensure that the heater is switched off and

disconnected from the power outlet before

cleaning.

Carefully wipe the exterior of the heater

with a soft damp cloth and dry thoroughly

with a dry cloth.

Over time, dust may accumulate on the

front grilles. This can be removed by

wiping with a damp cloth.

Store the heater in a cool dry place when

not in use. Store the heater in its carton if

possible.

Care and cleaning

Inhaltsverzeichnis

Andere Sunbeam Heizung Handbücher

Sunbeam

Sunbeam 9100020009040 Bedienungsanleitung

Sunbeam

Sunbeam HE2050 Bedienungsanleitung

Sunbeam

Sunbeam HE2100 Bedienungsanleitung

Sunbeam

Sunbeam SFH400 Bedienungsanleitung

Sunbeam

Sunbeam SQH310 Bedienungsanleitung

Sunbeam

Sunbeam SCH4062 Bedienungsanleitung

Sunbeam

Sunbeam HE2055 Bedienungsanleitung

Sunbeam

Sunbeam HE3100 Bedienungsanleitung

Sunbeam

Sunbeam SFH5963M Bedienungsanleitung

Sunbeam

Sunbeam SCH160 Handbuch

Sunbeam

Sunbeam HE4100 Bedienungsanleitung

Sunbeam

Sunbeam Steam Master Bedienungsanleitung

Sunbeam

Sunbeam SCH4015 Series Bedienungsanleitung

Sunbeam

Sunbeam HE4900 Bedienungsanleitung

Sunbeam

Sunbeam Smartheat HE6150TF Bedienungsanleitung

Sunbeam

Sunbeam SCH160-CN Handbuch

Sunbeam

Sunbeam Tower Fan Heater Bedienungsanleitung

Sunbeam

Sunbeam HE4200 Bedienungsanleitung

Sunbeam

Sunbeam SFH111 Bedienungsanleitung

Sunbeam

Sunbeam SFH442 Bedienungsanleitung

Sunbeam

Sunbeam Micro Furnace MF2000 Bedienungsanleitung

Sunbeam

Sunbeam Heater Calefactor Bedienungsanleitung

Sunbeam

Sunbeam Smartheat HE6100 Bedienungsanleitung

Sunbeam

Sunbeam SFH436-CN Handbuch

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung