Sundstrom SR 700 Bedienungsanleitung

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

1 of 23

Operating instruction

SR 700

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

2 of 23

General information

The SR 700 is a battery-powered particle filter fan unit that, together

with particle filter and head top - hood, visor, welding shield, helmet

with visor or full face mask - is included in the Sundström fan-

assisted respiratory protective device systems conforming to EN

12941/12942:1998 and to Sundström Powered Air Purifying

Respirator (PAPR) system conforming to AS/NZS 1716:2012.

Following face pieces are compatible:

SR 200 Full face mask

SR 520 S/M and M/L Hood

SR 520 S/M Hood

SR 530 Hood

SR 540 Face shield

SR 561 Hood

SR 562 Hood

SR 580 Helmet with Visor

Welding shield together with helmet with visor SR 584/SR 580.

Gold-plated shield together with helmet with visor SR 587/SR 580.

Shield 2/3, EN 3 together with helmet with visor SR 588-1/SR 580.

Shield 2/3, EN 5 together with helmet with visor SR 588-2/SR 580.

SR 590 Welding shield

The SR 700 can be used as an alternative to filter respirators in all

situations for which these are recommended.

This applies particularly to work that is hard, warm or of long

duration.

When selecting filters and head top, the following are some of the

factors that must be taken into account:

• Types of pollutants

• Possible occurrence of explosive atmosphere

• Concentrations

• Work intensity

• Protection requirements in addition to respiratory protective device

The risk analysis should be carried by a person who has suitable

training and experience in the area.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

3 of 23

3.1 Unpacking SR 700

Check that the equipment is complete

in accordance with the packing list and

has not been damaged in transit.

Packing list:

•1. Fan SR 700, bare

•2. Battery SR 701, 2,2 Ah

•3. Battery charger SR 713

•4. Belt PES SR 508

•5. P3 R Particle filter SR 510, 2x

•6. Filter adapter

•7. Pre-filter SR 221, 10x

•8. Pre-filter holder SR 5153

•9. Flow meter SR 356

•10. User instructions

•11. Cleaning tissue SR 5226

3.4 Filter

Read carefully the user instructions

accompanying the filters.

Particle filter

The fan unit may be used with only

particle filters P3 R (PAPR-P3), model

number SR 510 with filter adapter or SR

710, which provides protection against all

types of particles, both solid and liquid.

Note!

• When filters are changed, both filters

must be changed at the same time.

Pre-filter

The pre-filters SR 221 protect the main

filter against excessively fast clogging.

The pre-filter holders also protect the

main filters against handling damage.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

4 of 23

3.5 Assembly

Battery

Remove and charge the battery.

The charger carries out charging

automatically in three stages.

1. Orange LED.

2. Yellow LED.

3. Green LED.

Check that the gasket round the charge

contact in the fan unit is in place and is

in good condition.

After charging battery, mount it back

into the fan unit.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

5 of 23

3.5 Mounting

Belt

Put the belt halves together by pressing

the locking into each other.

The belt is mounted into the fan unit

with belt plate pointing upward.

Put the three tongues of the belt plate

into the back of the fan unit.

Start putting in the upper tongue and

then fold in the rest of them.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

6 of 23

All three tongues in place.

Press the three small tongues locking

the belt into the fan unit.

Correct mounted belt.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

7 of 23

Breathing Hose

Check that the O-ring at both ends of

the hose is ok.

Put hose connection into the fan unit.

Turn it a quarter of a turn clockwise to

lock it.

Check that the hose is firmly secured.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

8 of 23

Particle filters

Two filters must always be used at the

same time.

• Check that the gaskets in the filter

mounting of the fan unit are in place and

are in good condition.

If particle filter SR 510 is used, snap it

on the filter adapter without pressing

onto the centre of the filter.

Screw the filter into the filter mounting

so far that the adapter will be in contact

with the gasket.

Then turn it about 1/8 of a turn further in

order to ensure a good seal.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

9 of 23

Assemble the pre-filters.

Press the pre-filter holders onto the

particle filters.

Mounted pre-filter holders onto the

filters.

Drawn up by:

2011-09-02/RK

OI06H-7018 SR 700

Revision:

Reviewed:

2017-02-13/PA

Page:

10 of 23

3.6 Start/Switch off

Start the fan by pressing the control

button once.

The symbols on the display will light up

and the sound signal will sound.

The fan starts in normal operating status

(175 l/min).

Switch between normal and boosted

operating status (225 l/min) with the

control button.

Andere Handbücher für SR 700

Inhaltsverzeichnis

Andere Sundstrom Atemwegsprodukt Handbücher

Sundstrom

Sundstrom SR540 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

Sundstrom

Sundstrom SR 507 Technisches Handbuch

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

Sundstrom

Sundstrom SR561 Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR 100 M/L Handbuch

Sundstrom

Sundstrom SR570 Bedienungsanleitung

Sundstrom

Sundstrom SR 200 Bedienungsanleitung

Sundstrom

Sundstrom SR 84 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 EX Bedienungsanleitung

Sundstrom

Sundstrom SR 100 Bedienungsanleitung

Sundstrom

Sundstrom SR 900 Bedienungsanleitung

Sundstrom

Sundstrom SR562 Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR 200 Bedienungsanleitung

Sundstrom

Sundstrom SR307 Technisches Handbuch

Sundstrom

Sundstrom SR 200 APR Bedienungsanleitung

Sundstrom

Sundstrom SR 900 Bedienungsanleitung

Sundstrom

Sundstrom SR76-3 Bedienungsanleitung

Sundstrom

Sundstrom SR540EX Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR 520 Montageanleitung

Sundstrom

Sundstrom SR 520 Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR 200 Technisches Handbuch

Sundstrom

Sundstrom SR 530 Bedienungsanleitung

Sundstrom

Sundstrom SR 200 Montageanleitung

Beliebte Atemwegsprodukt Handbücher anderer Marken

Omron

Omron COMP A-I-R NE-C801 Bedienungsanleitung

CERES

CERES nosko nebulizer kit Bedienungsanleitung

Dr.Frei

Dr.Frei NE-SM1 Bedienungsanleitung

North

North 5400 series Bedienungsanleitung

John Bunn

John Bunn Neb-u-Lite LX2 Bedienungsanleitung

DeVilbiss

DeVilbiss UltraNeb Bedienungsanleitung

Sperian

Sperian Panther Hip-Pac P9684 Series Bedienungsanleitung

Dräger

Dräger X-plore 6570 Bedienungsanleitung

3M 8000 Series Bedienungsanleitung

Respironics

Respironics SideStream HS860 Bedienungsanleitung

JARDIBRIC

JARDIBRIC KPBRU20 Bedienungsanleitung

Ombra

Ombra 63506 Bedienungsanleitung

Lotus

Lotus M-9520A Bedienungsanleitung

Philips

Philips Respironics EE Leak 1 AF541 Bedienungsanleitung

EVOLU

EVOLU Nano AiR MINI Bedienungsanleitung

Ambu

Ambu SPUR II Bedienungsanleitung

MSA AUER

MSA AUER 3S-PF Bedienungsanleitung

MSA

MSA C420 Bedienungsanleitung