Sunjoy L-DN899SAL-A Bedienungsanleitung

Assembly Instructions

TABLE

Item# L-DN899SAL-A

Our clear, easy-to-follow, step by step instructions will guide you through the project from start to finish. The final

product will be a quality piece that will assemble easily and give years of enjoyment.

IMPORTANT:

Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the

accompanying illustrations to assure safe and proper assembly.

Repeated assembly can weaken the locking ability of the washers. Periodically check all bolted connections on

your product to make sure they are tight and secure. Please keep the instructions for future reference.

WARNING:

Begin assembly not less than 6 feet from any obstruction such as a fence, garage, house, overhanging branches,

Some parts may contain sharp edges.

Keep children away from assembly are

Check all nuts and bolts for tightness before and during usage.

Parts list:

Assembly Instructions:

No.

Description

Qty

Table top

Table Leg

Support ring

Lighting unit

Lighting unit top ring

Glass top

Inner hex bolt 1/4” x 20

Inner hex bolt 1/4” x 35

Spring washer φ1/4”

DD1

Flat washer φ1/4” (big)

DD2

Flat washer φ1/4” (small)

1/4”Hex key

Step 1: Connect Table top (A) and Leg (B) by using

bolt (AA), spring washer (CC) and big flat washer

(DD1). Please do not fully tighten the bolts here.

Step 2: Connect Leg (B) and Support ring (C) by

using bolt (BB), spring washer (CC) and small flat

washer (DD2). Then fully tighten all the bolts by

using hex key (EE).

DD2

DD1

BATTERY/LIGHTING UNIT INSTRUCTIONS:

CARE AND MAINTENANCE:

Immediately remove any spot or stain.

Wash with mild soap. Then rinse with water and air dry.

Do not use strong solvents or bleach as they may damage the surface.

Use an outdoor cover to extend the life of your patio set.

Disassemble the lighting unit for storage to extend its working life.

TROUBLE SHOOTING:

Problem

Possible Cause

Corrective Action

Can’t align the bolt holes.

Other components are

over-tightened.

Loosen the other bolts and realign

the holes before screwing again.

Step 3: Turn over the the whole assembled piece.

Place glass top (E) with the smooth surface facing

upwards on slate table top (A), locate lighting unit

(D1) under glass top (E) through the central hole and

fix with lighting unit top ring (D2).

Now your table is ready for use.

1. Six AAAbatteries are sold separately.

2. When you install new batteries, open the battery cover

according to labeling on battery compartment. Then, put the

batteries on top of the band and align batteries according to

the labeling as Fig.1.

3. Remove the batteries by pulling off the band.

4. Switch thelight unit on/off by turning the top Ring X at the

top of the lighting unit as Fig.2.

Fig.2

Fig.1

SAFETY INFORMATION!

WARNING:

Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable

(Nickel-Cadmium) batteries.

If you find any noise, excessive temperature or leakage from a battery, please discard.

When not using the unit for a considerable period of time, disconnect the batteries from the unit for storage.

If battery power is weak during use, switch off the device and dispose of batteries.

CAUTION:

Assemble on a soft, non-abrasive surface.

Don’t fully fasten the bolts until all bolts are in place.

Changes or modifications not approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

LIMITED WARRANTY:

This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship

of your item provided the item is maintained with care and used only for personal, residential purposes.

The item is warranted to be free from defects in material or workmanship for a period of one (1) year.If any

defect is found, please call our customer service department at 1-866-578-6569 for help. The manufacturer will

not cover transportation or delivery costs, or compensate the individual or any outside party for assembling or

disassembling the product. This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

EXCLUSIONS: Items used for commercial, contract, or other non-residential purposes, or items damaged due to

acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not

covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original

purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a

similar style and color if the original is unavailable or has been discontinued. As some states do not allow

exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This

warranty gives you specific rights, and you may also have other rights, which vary from state to state.

For technical assistance on assembly or replacement parts call Sunjoy Industries at 1(866)

578-6569 from 8:30 AM to 5:30 PM EST or Email customer.care@sunjoydirect.com or visit

www.sunjoydirect.com to place your order or fax your parts replacement order form together

with your purchase receipt to 1 (740) 283-3549 for assistance.

Assembly Instructions

SWIVEL - CHAIR

Item# L-DN899SAL-A

Our clear, easy-to-follow, step by step instructions will guide you through the project from start to finish. The final

product will be a quality piece that will assemble easily and give years of enjoyment.

IMPORTANT:

Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the

accompanying illustrations to assure safe and proper assembly.

Repeated assembly can weaken the locking ability of the washers. Periodically check all bolted connections on

your product to make sure they are tight and secure. Please keep the instructions for future reference.

WARNING:

Read and follow all Warnings &Assembly Instructions before attempting to assemble.

Begin assembly not less than 6 feet from any obstruction such as a fence, garage, house, overhanging branches,

laundry line, or electrical wires.

Some parts may contain sharp edges. Wear protective gloves as necessary.

Keep children away from assembly area.

Assemble on level ground.

Do not over tighten any of the bolts or nuts, but do tighten each bolt and nut until firm.

Check all nuts and bolts for tightness before and during usage.

Parts List:

Hardware List:

No.

Description

Qty

Image

Chair body

Triangle

support

Chair base

Foot rest ring

No.

Description

Size

qty

Image

AA1

Bolt (pre-assemble)

1/4”x28

AA2

Bolt (pre-assemble)

1/4”x30

Bolt (pre-assemble)

1/4”x35

Bolt

1/4”x45

Bolt

5/16”x40

Foot pad (pre-assemble)

¢19x20

Flat washer

(4pcs pre-assemble)

1/4”

Spring washer

(4pcs pre-assemble)

1/4”

Flat washer

5/16”

Spring washer

5/16”

nut

5/16”

Large washer

25x65x4.0

Hex key

1/4”

Wrench

5/16”

Fig.2

HH HH

Fig2

Fig.2: Place chair body (A) face down on a non-abrasive

surface and fix the triangle support (B) to the chair body as

Fig.2-2 by using bolt (DD), flat washer (HH), large washer

(KK), spring washer (II) and nut (JJ) in order. Fully tighten all

the bolts by using wrench.

Note: The triangle support (B) must be in the same

direction as Fig.2-1.

Fig.1: Place the chair base (C) on a level

surface, put the foot rest ring outside of the

base as Fig.1 and fix them by using bolt

(CC), spring washer (GG) and flat washer

(FF). Fully tighten all the bolts by using

hex key.

Fig.1

CC GG FF

CARE AND MAINTENANCE:

Immediately remove any spot or stain.

Wash with mild soap. Then rinse with water and air dry.

Do not use strong solvents or bleach as they may damage the surface.

Use an outdoor cover to extend the life of your patio set.

LIMITED WARRANTY:

This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship

of your item provided the item is maintained with care and used only for personal, residential purposes.

The item is warranted to be free from defects in material or workmanship for a period of one (1) year. If any