Sunjoy Royal Hardtop Gazebo Bedienungsanleitung

Royal Hardtop Gazebo

Item#˖L-GZ066PST

Congratulations on your purchase of our SUNJOY Royal Hardtop Gazebo. Our clear, easy to follow,

step-by-step instructions will guide you through the assePbly process from start to finish.

WARNING:

zTHIS UNIT IS HEAVY! For safety, DO NOT assemble this item alone. 6 to 8 people are recommended for safe

assembly.

zKeep all children and pets away from assembly area. Children and pets should be supervised when they are in the

assembly area of the Gazebo.

zDo not assemble less than 6 ft / 1.8 m from any obstruction such as a fence, garage, house, overhanging branches,

laundry line or electrical wires.

zSome parts may contain sharp edges. Wear protective gloves.

zWhen assembling and using this product, basic safety precautions should always be followed to reduce the risk of

personal injury and damage to equipment. Please read all instructions before assembly and usage.

zFor outdoor use only. Install on level ground.

zCheck all bolts for tightness before and during usage.

IMPORTANT

Please take time to read these instructions thoroughly and follow each step carefully for safe and easy

operation. Keep this manual for future reference.

For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569 from

8:30AM to 5:30PM EST, or email us at [email protected], or visit www.sunjoydirect.com for

assistance.

1A (x4) Left Rain Gutter

1B (x4) Right Rain Gutter

1C (x4) Straight Pole

Connector

1D (x4) Tilting ole

Connector

2A (x4) Top Tilting Pole 2B (x4) Top Straight Pole

2C (x4) Top Long Connector

(left) 2D (x4) Top Long

Connector (right)

2E (x4) Top Short

Connector (left) 2F (x4) Top Short

Connector(right)

2G (x1) Small Top Frame

3A (x1) Finial

3B (x1) Small Top cover

3C (x4) Small Top Roof

Sheet

3D (x4) Small Frame Corner

cover 3E (x4) Small Top Tilting

Pole

3F (x1) Center Fitting

4A (x4) Top Large Roof

Sheet(left)

4B (x4) Top Large Roof

Sheet(right)

4C (x4) Top Middle Roof

Sheet (left)

4D (x4) Top Middle Roof

Sheet(right) 4E (x4) Top Small Roof

Sheet t(right)

4F (x4) Top Small Roof

Sheet t(left)

4I (x16) Long Cover

Presser

4J(x8) Short Cover Presser 4K (x1) Hanger Pole

4L (x1) Hook

4M(x4) Upper Cover Peg

5A (x4) Large Roof Down

Cover 5B (x4) Large Roof Upper

Cover

6A (x4) Column 6B (x4) Column Base

6C (x4) Base Protector

6D (x4) Column Top

6E (x4) L-Shaped Cover

Parts List NOTE: Please lay something underneath all the parts to avoid scratching.

Tools Required For Assembly (not included):

Phillips screwdriver

Hammer

Drill

Ladder (minimum 8.2 ft / 2.4 m)

Item Identification

For ease of identification, all parts are labeled to correspond to the step number in which the part is used. The Gazebo is designed to be

constructed in 6 main steps as outlined below.

STEP #1 – RAIN GUTTER

LL (x8) Bolt M6 x35mm

BB (x36) Flat Washer M6

CC (x8) Screw M6 x 15mm

KK (x20) Screw M6 x 15mm

WW (x2) Wrench M6

1. Insert Left Rain Gutter (1A) into Right Rain Gutter (1B),tighten with Screw (KK) and Flat Washer BB. (Fig.1) Note: Do not

tighten the other side.

2. Insert 1 of the rest Left Rain Gutter (1A) into baffle on assembled Right Rain Gutter(1B),tighten with Bolt (LL) and Flat

Washer (BB) .(Fig. 2)

3. Connect Straight Pole Connector (1C) with assembled Left Rain Gutter (1A) and Right Rain Gutter (1B), tighten with Flat

Washer (BB) and Screw (CC). (Fig 3)

STEP #2 – LARGE TOP FRAME

BB (x60) Flat Washer M6

KK (x48) Screw M6 x 15mm

DD (x12) Screw M6 x 55mm

EE (x12) Nut M6

1. Attach one end of Top Tilting Pole (2A) to Tilting Pole Connector (1D). Tighten with Screw (DD) ,Flat Washer (BB) and Nut EE. (Fig

4.1). Attach the other end of Top Tilting Pole (2A) to Small Top Frame (2G), tighten with Screw (KK) and Flat Washer (BB). (Fig 4.2)

2. Attach one end of Top Straight Pole (2B) to Straight Pole Connector (1C). (Fig 5.1)

Attach the other end of Top Straight Pole (2B) to Small Top Frame (2G) tighten with Screw (KK) and Flat

Washer (BB).(Fig 5.2)

Connect Tilting Pole Connector (1D) with assembled Left Rain Gutter (1A) and Right Rain Gutter (1B), tighten with Screw

(KK) and Flat Washer (BB).( Fig.3-1)

STEP #3 – SMALL FRAME

BB (x24) Flat Washer M6

KK (x12) Screw M6 x 15mm

DD (x4) Screw M6 x 55mm

EE (x4) Nut M6

FF (x8) Screw M6 x 40mm

1. Attached Small Top Tilting Pole (3E) to Center Fitting (3F), tighten with Screw (DD), Flat Washer (BB) and Nut (EE).

( Fig.7.1)

2. Attach the other end of Small Top Tilting Pole (3E) to Small Top Tilting Pole (3E) ,connect Small Top Tilting Pole(3E)

and Small Top Connector (2G) by Screws (KK) and Flat Washer (BB). (Fig 8.2)

3. Connect Top Short Connectors Left (2E) and Right (2F),Top Long Connectors Left (2C) and Right (2D) to Top Straight Poles

(2B) and Top Tilting Poles( 2A) by using Flat Washer (BB) and Screw (KK) (Fig 6.1,Fig 6.2) (Note: UP label should be facing up)

STEP #4 – COLUMNS

AA (x48) Bolt M6 x 20mm

BB (x64) Flat Washer M6

JJ (x32) Spring Washer M6

KK (x16) Bolt M6 x 15mm

GG (x16) Stakes 8 x 250

QQ (x16) Expansion Bolt M6 x 70

3. Place Small Top Roof Sheet (3C) to Small Top Frame, securing them with Screw (KK) and Flat Washer (BB )

(Fig.8.1)..

4. Place Small Top Corner Cover (3D) to Small Top Roof Sheet (3C), securing them with Screw (FF) and Flat

Washer (BB) (Fig 8.2).

5. Attach Small Top Cover (3B) and Finial (3A) to Small Top Frame (3F) (Fig 8.3)

1. Slide Base Protector (6C) into Column (6A) before connecting to the Colum Base (6B)

Connect Column Base (6B) to Column (6A) with Bolt (AA), Spring Washer (JJ) and Flat Washer (BB). (Fig 9.1)

2. Fasten Column (6A) and Column Top (6D) with Bolts (AA), Spring Washers (JJ) and Flat Washers (BB). (Fig 9.2)

STEP #5 – ROOF PART 1

KK (x80) Bolt M6 x 15mm

FF (x8) Screw M6 x 40mm

BB (x88) Flat Washer M6

3. Attach assembled Column Top (6D) to Left Rain Gutter (1A) and Right Rain Gutter (1B), tighten with Bolt (AA) and Flat Washer

(BB). (Fig 10.1)

4. Attach Tilting Pole Connector (1D) to Column Top (6D), tighten with Bolt (KK) and Flat Washer (BB). (Fig 10.2)

5. Attach L-Shaped Cover (6E) to Column Top (6D), tighten with Bolt (KK) and Flat Washer (BB). (Fig 10.3)

6. Place the Stakes (GG) through the Column Base (6B) into the ground (Fig 11.1)

7. Drill 4 holes (Ħ10*80MM(min)) into the ground with a percussion drill. Align the Column Base (6B) with the

drilled holes and fasten with the Expansion Bolt (QQ).(Fig 11.2)

For Set Up on Soft Ground For Set Up on Hard Ground

1. Place Planter Hook (4L) to Hanger Pole (4K).(Fig 12.1)

2. Place Top Large Roof (4A) and Top Large Roof Sheet (4B) on Top Frame, fasten with Bolts (KK) and Flat Washer (BB).

(Fig 12.2, Fig 12.3) Repeat for remaining sides.

3. Attach Hanger Pole (4K) to Small Top Frame (2G) with Upper Cover Peg (4M) on, tighten with Bolt (KK) and Flat

Washer (BB).( Fig.12.4)

4. Attach the remaining Top Large Roves (4C),(4D),(4E),(4F) onto Top Tilting Poles (2A). (Fig 13.1)

5. Place the long Cover Presser (4l) and Short Cover Presser (4J) on the Top of Roof Sheets, tighten with Bolt (KK) and

Flat Washer (BB). (Fig 13.2)

6. Insert one end of Large Roof Upper Cover (5B) into holes on Small Top Tilting Pole (3E), pressed the other end

of Large Roof Down Cover (5A),Tighten with Screw (FF) and Flat Washer (BB). Assembly Completed!

Care & Maintenance

Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the nature of steel,

surface oxidation (rusting) will occur if this protective coating is scratched.

To minimize this condition, it is recommended that care be taken when assembling and handling the product, in order to prevent

the paint from being scratched.

Limited Warranty:

Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and materials for a period

of 2 year from the date of purchase, provided the item was factory-sealed at the time of purchase and is maintained with care

and used only for personal, residential purposes. Should any manufacturing defect arise within this warranty period, Sunjoy

Industries will repair or replace (at our option) any defective merchandise upon proof of purchase; however, transportation and

delivery costs, as well as payments to a third party for assembly or disassembly of the item, remain the responsibility of the

purchaser. A purchaser of an "open box," previously-returned, or "clearance" item, as well as original purchasers outside of the

warranty period, may obtain replacement parts from Sunjoy Industries for products in current production, at nominal cost.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism,

misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated

register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement

of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been

discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations

may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.

Back up hardware pack

AA (x2) Bolt M6 x 20mm

BB (x6) Flat Washer M6

CC (x2) Screw M6 x 15mm

DD (x1) Screw M6 x 55mm

EE (x2) Nut M6

FF (x1) Screw M6 x 40mm

JJ (x2) Spring Washer M6

KK (x4) Bolt M6 x 15mm

LL (x1) Bolt M6 x35mm

GG (x1) Stakes 8 x 250

QQ (x1) Expansion Bolt M6 x 70

Andere Handbücher für Royal Hardtop Gazebo

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy HAMPTON Bedienungsanleitung

Sunjoy

Sunjoy L-PB120PAL Bedienungsanleitung

Sunjoy

Sunjoy L-GZ815PST-1-MN Bedienungsanleitung

Sunjoy

Sunjoy SummerCove A102014000 Bedienungsanleitung

Sunjoy

Sunjoy A102008000 Bedienungsanleitung

Sunjoy

Sunjoy A109004402 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ340PST-3N-6 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ240PST-C Bedienungsanleitung

Sunjoy

Sunjoy L-GG015PCO Bedienungsanleitung

Sunjoy

Sunjoy D-GZ844PCO-I1 Bedienungsanleitung

Sunjoy

Sunjoy South Hampton L-GZ215PST-A-MN Bedienungsanleitung

Sunjoy

Sunjoy SummerCove A102017900 Bedienungsanleitung

Sunjoy

Sunjoy A106008511 Beilage

Sunjoy

Sunjoy A106008000 Beilage

Sunjoy

Sunjoy A102001703 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ240PST-A-MN Bedienungsanleitung

Sunjoy

Sunjoy Monterey Bedienungsanleitung

Sunjoy

Sunjoy A101012900 Bedienungsanleitung

Sunjoy

Sunjoy S-BS1123SST-KD Bedienungsanleitung

Sunjoy

Sunjoy A102008001 Bedienungsanleitung

Sunjoy

Sunjoy 187020 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ846PCO-AS-136-N Bedienungsanleitung

Sunjoy

Sunjoy L-GZ1080PCO Bedienungsanleitung

Sunjoy

Sunjoy PINEHURST L-GZ1188PST Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung