Sunny SF-B1714 Bedienungsanleitung

EVOLUTION PRO MAGNETIC BELT

DRIVE INDOOR CYCLING BIKE

SF-B1714

USER MANUAL

IMPORTANT! Read all instructions carefully before using this product. Retain

owner’s manual for future reference. For customer service, please contact:

[email protected]

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this

equipment correctly. It is important to read this entire manual before assembling and using the

equipment. Safe and effective use can only be assured if the equipment is assembled,

maintained, and used properly. It is your responsibility to ensure that all users of the equipment

are informed of all warnings and precautions.

1. Before starting any exercise program you should consult your physician to determine if

you have any medical or physical conditions that could put your health and safety at risk

or prevent you from using the equipment properly. Your physician’s advice is essential if

you are taking any medication that may affect your heart rate, blood pressure, or

cholesterol level.

2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your

health. Stop exercising if you experience any of the following symptoms: pain, tightness

in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or

feelings of nausea. If you do experience any of these conditions, you should consult

your physician before continuing with your exercise program.

3. Keep children and pets away from the equipment. The equipment is designed for adult

use only.

4. Use the equipment on a solid, flat level surface with a protective cover for your floor or

carpet. To ensure safety, the equipment should have at least 2 feet (60 cm) of free

space all around it.

5. Ensure that all nuts and bolts are securely tightened before using the equipment. The

safety of the equipment can only be maintained if it is regularly examined for damage

and/or wear and tear.

6. Always use the equipment as indicated. If you find any defective components while

assembling or checking the equipment, or if you hear any unusual noises coming from

the equipment during exercise, stop using the equipment immediately and don’t use the

equipment until the problem has been rectified.

7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may

become entangled in the equipment.

8. Do not place fingers or objects into the moving parts of the equipment.

9. The maximum weight capacity of this unit is 330 pounds (150 kg).

10.This equipment is not suitable for therapeutic use.

11. Move with caution when lifting and moving the equipment. Always use proper lifting

technique and seek assistance if necessary.

12.Your product is intended for use in cool, dry conditions. You should avoid storage in

extreme cold, hot, or damp areas as this may lead to corrosion and other related

problems.

13.This equipment is designed for indoor use only! It is not intended for commercial use!

WARNING: This product can expose you to one or more chemicals known to the

State of California to cause cancer and birth defects or reproductive harm. For

more information go to www.P65Warnings.ca.gov.

EXPLODED DRAWING

14 82

PARTS LIST

No.

Description

QTY

No.

Description

QTY

Main Frame

1pc

Hex Socket Head Bolt M8x15

3 pcs

Front Stabilizer 40x80x2T

1 pc

Washer 10x29x2T

2 pcs

Rear Stabilizer 40x80x2T

1 pc

Self-tapping Screw M5x12

3 pc

Handlebar Post 40x80x2T

1 pc

Bottle Holder

1 pc

Seat Post 40x80x2T

1 pc

Screw M5x10

2 pcs

Handlebar Φ25.4x2T

1 pc

Philips Screw M3x10

1 pc

Saddle Column

1 pc

Steel Sleeve Φ12*17*9

1 pc

Plastic Fastener 50x100x100mml

2 pcs

Self-tapping Screw M4.5x15

2 pc

Seat VL-6100

1 pc

Self-tapping Screw M4.2x10

13pcs

Flywheel Φ468

1 pc

Hex. Bolt M6x35

1 pc

Belt Wheel Φ260 with Axis

1 pc

Idle Wheel Fixture

1 pc

Belt 1590 PK5

1 pc

Nylon Nut M10x9T

1 pc

Right Chain Cover

1 pc

Steel Sleeve Φ25.1x32x10T

1 pc

Left Chain Cover

1 pc

Steel Bearing 6005-2RS

2 pcs

Right Inner Chain Cover

1 pc

C-ring Φ20

2 pcs

Left Inner Chain Cover

1 pc

C-ring Φ25

1 pc

Side Trim Cover

1 pc

Idle Wheel

1 pc

18R

Right Crank

1 pc

Wave Washer 27x34x0.3T

1 pc

18L

Left Crank

1 pc

Plastic Washer 10x20x2T

2 pcs

Plastic cap for Crank

2 pcs

Plug Φ17

3 pcs

20R

Right Pedal JD-304V

1 pc

Steel Sleeve Φ10.2x15x6T

1 pc

20L

Left Pedal JD-304V

1 pc

Axis Φ20x155mm

1 pc

Spring knob M16x26

2 pcs

Wave Washer 21x27x0.3T

1 pc

L-shaped knob M10x20

1 pc

Washer 20.5x25x0.5T

1 pc

Knob M10x28

1 pc

Hex. Bolt M10x32

1 pc

Lock Nut M10

1 pc

Nylon Nut M10x6T

1 pc

Washer 19.5x38x2T

1 pc

Plastic Bearing Φ12.8x21.4x6.7T

4 pcs

26R

Right Magnet Plastic Cover

1 pc

Plastic Sleeve Φ7.9x12.7x23.5mm

2 pcs

26L

Left Magnet Plastic Cover

1 pc

Fixed Plate

2 pcs

Support Bar 20x20x1.4T

1 pc

Cushion Knob M10x25

4 pcs

Magnet Bracket

1 pc

Cap Φ76

4 pcs

Brake Rod

1 pc

Transport Wheel Φ70

2 pcs

Fixed Cover

1 pc

Tension Control knob M10

1 pc

Groove Fastener

2 pc

Bolt M5x15

2 pcs

Spring Washer

1 pc

Bolt M5x10

2 pcs

Nylon Nut M6

2 pcs

Self-tapping Screw M4.5x25

5 pcs

Nylon Nut M8

2 pcs

Plastic Cap

1 pc

Cap Nut M10

4 pcs

Washer 12x24x1.5T

2 pcs

Carriage Bolt M10x55

4 pcs

Washer Φ5

2 pcs

Washer 10x19x1.5T

6 pcs

Plastic Cover

1 pc

Hex. Nut M10x6T

4 pcs

Washer 10x20x2 T

1 pc

Hex Socket Head Bolt M8x38

2 pcs

Plastic Spacer 34.8*34.8*6T

1 pc

Spring Φ2.6x18

1 pc

Oval Cover

1 pc

Adjustment Bar Φ6x60

1 pc

Self-tapping Screw

2pcs

Compressed Spring Φ1.5x9

1 pc

Spanner S14 S17

1 pc

Crank Plug

2 pcs

Spanner S13 S15

1 pc

Flange Nut M12x1.5x10.4T

4 pcs

Crosshead Spanner S13 S14 S15

1 pc

HARDWARE PACKAGE

ASSEMBLY INSTRUCTIONS

#89 S14 S17 1PC

STEP 1:

Attach Rear Stabilizer (No. 3) to

Main Frame (No. 1) using 2 Carriage

Bolts (No. 36), 2 Washers (No. 37)

and 2 Cap Nuts (No. 35). Tighten

with Spanner (No. 89).

Attach Front Stabilizer (No. 2) to

Main Frame (No. 1) using 2 Carriage

Bolts (No. 36), 2 Washers (No. 37)

and 2 Cap Nuts (No. 35). Tighten

with Spanner (No. 89).

STEP 2:

Insert Handlebar Post (No. 4) into

Main Frame (No. 1) and fix with

Spring Knob (No. 21).

STEP 3:

Secure the Handlebar (No. 6) onto the

Handlebar Post (No. 4) using Knob

(No. 23),Washer (No. 46),Washer

(No. 25) and Lock Nut (No. 24).

#90 S13 S15 1PC

#91 S13 S14 S15 1PC

STEP 4:

Unscrew 2 nuts on Seat (No. 9),

then attach Saddle Column (No. 7)

to Seat (No. 9), and screw the nuts.

Tighten with Spanner (No. 90).

Insert the Saddle Column (No. 7)

into Seat Post (No. 5) and fix using

the L-shaped knob (No. 22).

STEP 5:

Screw the Left Pedal (No. 20L)

counter-clockwise into Left Crank

(No. 18L). Once screwed in place,

use Spanner (No. 90) to tighten.

Screw the Right Pedal (No. 20R)

clockwise into Right Crank (No.

18R). Once screwed in place, use

Spanner (No. 90) to tighten.

STEP 6:

Remove the 2 Bolts (No. 78) on the

Main Frame (No. 1).

Reattach the Bolts (No. 78) back

into the Main Frame (No. 1) along

with the Bottle Holder (No. 48).

Tighten with Crosshead Spanner

(No. 91).

ADJUSTMENTS GUIDE

TENSION ADJUSTMENT

Turn Tension Control Knob (No.

77) clockwise to increase tension.

Turn Tension Control Knob (No.

77) counter-clockwise to decrease

tension.

EMERGENCY BRAKE

Push down and hold the Tension

Control Knob (No. 77) to stop the

flywheel.

HANDLEBAR ADJUSTMENT

Loosen the Spring Knob (No. 21) to

raise or lower the handlebar to the

desired position. Make sure the Spring

Knob (No. 21) settles into the desired

hole and secure it firmly by turning

clockwise.

HANDLEBAR ADJUSTMENT

Loosen the Knob (No. 23) to move the

handlebar forward or backward to the

desired position. Once the handlebar is

in the desired position, firmly secure the

Knob (No. 23) by turning clockwise.

MOVING THE BIKE

Steadily push down from the front of

the Handlebar (No. 6) to tilt the bike

towards you. With the transportation

wheels in motion, you can gently

move the bike to the desired location.

Move with caution as you transport

the bike as impact may cause

damage to the equipment.

SEAT ADJUSTMENT

Loosen the Spring Knob (No. 21)

to raise or lower the Seat Post (No.

5) to the desired position. Make

sure the Seat Post (No. 5) secures

into the desired hole.

SEAT ADJUSTMENT

Loosen the L-shaped Knob (No. 22)

to move the seat forward or

backward to the desired position.

Once the position is located, firmly

secure the L-shaped Knob (No. 22)

by turning clockwise.

PEDAL STRAP

ADJUSTMENT

Your feet should be secured in the

toe clips during exercise. Place

your foot as far forward into the toe-

clips as you can. With your foot in

place, turn the crank to bring one

foot to within arm’s reach, grasp the

pedal strap and pull it upward to

tighten the toe-clip cage. Then

insert the strap back into the hoop

of the toe-clip. Repeat this process

to secure your other foot.

ADJUSTING THE BALANCE

To achieve a smooth and comfortable

ride, ensure the bike is stable. If you

notice the bike is unbalanced during use,

adjust the foot levelers located beneath

the front and rear stabilizers. To do so,

rotate the Cushion Knob (No. 74) until

the bike becomes level with the floor.

MAINTENANCE GUIDE

This is general information for daily, weekly and monthly maintenance to be performed on

your bike.

Daily Maintenance

After each exercise session, wipe down all the equipment: seat, frame, handlebars. Pay

special attention to the seat post, handlebar post and belt/chain guard. Sweat is very

corrosive and may cause problems for parts replacement later.

1. Get on the bike and engage the drive train.

2. Pay attention to any vibrations felt through the pedals. If you feel any vibrations, you may

need to tighten the pedals, middle axle, or adjust the drive belt/chain tension.

3. Use a wrench to tighten the pedals until they are secure.

Weekly Maintenance

Inspect moving parts and tighten the hardware.

Inspect pull pin frame fittings, making sure the fittings are snug. Loose frame fittings may

strip out threads over time and cause extensive damage.

Clean and lubricate pop pin assemblies. Pull on the pin and spray a small amount of

lubricant onto the pin.

Tighten the seat hardware, making sure the seat is level and centered.

Brush and treat the resistance pads. Remove any foreign material that may have collected

on the pads. Spray the pads with silicone lubricant. This helps to reduce noise from friction

between the pads and the flywheel.

Visually inspect the middle axle, toe clips and toe straps. If any of them are loose or

disconnected, attach and tighten.

Monthly Maintenance

Check all hardware is secure, such as: water bottle holder, flywheel nuts, belt/chain guard

bolts, brake caliper lock nuts and brake caliper tension rod nuts.

Inspect the brake tension rod for signs of wear such as missing threads. Clean and

lubricate the brake tension rod.

Clean and lubricate the seat post, handlebar post and seat slider. Remove any build up of

foreign material at point of insertion.

Version 1.1

Inhaltsverzeichnis

Andere Sunny Heimtrainer Handbücher

Sunny

Sunny MINI CYCLE Bedienungsanleitung

Sunny

Sunny SF-RB4601 Bedienungsanleitung

Sunny

Sunny SF-B2710 Bedienungsanleitung

Sunny

Sunny SF-B1401 Bedienungsanleitung

Sunny

Sunny SF-RB4616 Bedienungsanleitung

Sunny

Sunny sf-b1203 Bedienungsanleitung

Sunny

Sunny SF-B1002 Bedienungsanleitung

Sunny

Sunny SF-B1001 Bedienungsanleitung

Sunny

Sunny SF-B1509 Bedienungsanleitung

Sunny

Sunny SF-BH620062 Bedienungsanleitung

Sunny

Sunny p8100 Bedienungsanleitung

Sunny

Sunny SF-RBE4886 SMART Bedienungsanleitung

Sunny

Sunny p8100 Bedienungsanleitung

Sunny

Sunny SF-RB1117 Handbuch

Sunny

Sunny SF-B0418 Bedienungsanleitung

Sunny

Sunny SF-RB4631 Bedienungsanleitung

Sunny

Sunny p8100 Bedienungsanleitung

Sunny

Sunny SF-RB4953 Bedienungsanleitung

Sunny

Sunny SF-RBD4703 Bedienungsanleitung

Sunny

Sunny 030 Bedienungsanleitung

Sunny

Sunny SF-B2621 Bedienungsanleitung

Sunny

Sunny SF-B901 Bedienungsanleitung

Sunny

Sunny SF-B1735 Bedienungsanleitung

Sunny

Sunny SF-B901B Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

Weslo

Weslo Vector 302 Kurzanleitung

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Pro-Form

Pro-Form 345 Zlx Bike Benutzerhandbuch

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung