Sunrich Tech S-290 Bedienungsanleitung
USB 3.0 2.5’’ SATA Hard Drive
Enclosure
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.
MN6000000032 Page2
Features & Specifications
Supports USB 3.0 SuperSpeed and USB 2.0
Maximum transfer rate of 5 Gbps with USB 3.0 and 480Mbps
with USB 2.0; actual speed depends on the hard drive
performance
Supports SATA 2.5’’ hard drives
Supports Plug and Play
No software or drivers required
LED to indicate drive power and activity
System Requirements
Windows® XP/Vista/7 (32/64 bit)
Available USB port
Package Contents
1 x USB 3.0 2.5’’ SATA Hard Drive Enclosure
1 x User Manual
1 x USB 3.0 Cable
Note: Contents may vary depending on country/market.
MN6000000032 Page3
Hardware Installation
1. Chassis Assembly
Disassemble the front panel from the housing by removing one screw
from each side of the housing with a screwdriver, then remove the front
panel
(See Figure A-C)
Figure A
Figure B
Figure C
MN6000000032 Page4
2. Hard Drive Installation
Connect the hard drive, install it and fasten the screws
(See Figure D-G)
Figure D
Figure E
Figure F
Figure G
MN6000000032 Page5
Driver Installation
No driver installation is required for Windows operating systems, as
this enclosure is natively supported, so the drivers are already installed.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Sunrich Tech Gehäuse Handbücher
