Superbrightleds FUT Series Bedienungsanleitung

RGB+CCT Bulbs

User Manual

Important: Read all instructions prior to installation. FUTxxx Series

Specications

Model FUT104 FUT103 FUT012

bulb type MR16

(GU5.3)

MR16

(GU10)

A19

(E26/E27 base)

operating voltage 12 VAC/VDC 100 –240 VAC

power consumption 4 W 9 W

dimming through controller only (saturation)

Compatible Remote Controls

One of these controls (available at additional cost) is required

to control the bulb. Each light can be linked with up to 4 di󰀨erent

remote controls (any combination of wireless remotes and Wi-Fi

controls). Each control (and zone) can be linked to an unlimited

number of lights.

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev. V3 Date: 02/08/21

RGBCCT-MZ8-RF

1 1

8 8

1. Master On/O󰀨

Acts as a master On (-)/O󰀨 (O) control for all linked RGBW and RGB+CCT lights. Also

activates the Master function, which allows remote to control lights of all zones. If a zone

is currently active, pressing Master On (-) button on remote or back button in app restores

Master function to the remote.

2. Color Selection Ring

Directly selects color along a circular spectrum. Press W button to changes to a

steady bright white.

3. Selection LED Indicator (wireless remote control only)

Flashes once to indicate when a command has been selected.

4. Brightness Touch Slider - Increase/Decrease

Increases (right side) or decreases (left side) the brightness level. Changing active mode

resets brightness level to full.

5. Saturation/CCT Touch Slider - Increase/Decrease

Increases (right side) or decreases (left side) the color saturation level. When controlling

white, adjusts from cool white (right side) to warm white (left side).

6. Mode

Nine distinct modes feature di󰀨erent color combinations, light transitions, and patterns.

On wireless remote, this button initiates mode function and scrolls through modes in

ascending order. In app, simply select mode button and press any numbered mode

button to switch between modes.

7. Mode Speed Increase/Decrease

Increases (S+ or +Speed) or decreases (S- or -Speed) speed of currently active mode.

8. Zones 1–8 On (|)/O󰀨 (O)

Allows up to eight zones (channels) of RGBW and/or RCB+CCT lights to be separately

linked and controlled by remote/app. Pressing any Zone On(|) button activates that zone.

Commands will a󰀨ect only lights in that zone. Once linked to a zone, lights remain linked until

they are unlinked.

9. White LED Selection

Switches to white LED operation.

Note: While functions remain the same, the phone/tablet display will vary in appearance from remote control.

Control Features

Light Modes

Mode Description Additional Control(s)

1 seven color, gradual transition saturation, speed, and brightness

2 white (mix of warm and cool), gradual transition speed and brightness

3 RGB, gradual transition saturation, speed, and brightness

4 seven color sequence, jump to change saturation, speed, and brightness

5 random color, jump to change saturation, speed, and brightness

6red light pulse then ash 3 times saturation, speed, and brightness

7green light pulse then ash 3 times saturation, speed, and brightness

8blue light pulse then ash 3 times saturation, speed, and brightness

9white (mix of warm and cool) light pulse then ash 3 times speed and brightness

• For indoor use only

• White color temperature can not be adjusted unless white

LED selection mode is active.

Safety and Notes

FUT012

FUT103

FUT104

WIFI-CON2

(for smart phone control)

Important: Read all instructions prior to installation.

Parts Included

Linking Lights to App Remote

Setup Instructions

1. Download MiBoxer app on compatible device (iOS or Android).

2. See WIFI-CON manual for complete instructions on how to establish connection

and set up Wi-Fi control.

Note: Constant 2.4 GHz Wi-Fi connection is required for remote access to Wi-Fi control

through your device.

RGB+CCT Bulbs

Wireless Remote Control

1 - WIFI-CON

1 - USB-500MA-5V

1 - RGBCCT-MZ8-RF

Pairing Lights to Remote Control

Setup Instructions

Install two AAA batteries (not included) into wireless remote.

Note: Wireless remote operates using radio frequency and has 100 ft. (30 m) range.

Applicable to controls only.

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation. Any changes or modications in construction

of this device which are not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

Pairing a Light

1. Make certain light is powered o󰀨.

2. Apply power. Within 3 seconds, press and hold one of the eight Zone On (|)

buttons until light begins ashing. Light will ash 3 times if successfully paired

to selected zone.

Note: If encountering issues when pairing, instead try continually pressing the

desired Zone On (|) button repeatedly from before when power is applied to the

controller until a few seconds after.

Activating and Controlling a Specic Zone

To activate a specic zone, press Zone On (|) button for desired zone. Zone

is now active and remote commands will only a󰀨ect lights paired to that zone.

Unpairing a Light

1. Make certain light is powered o󰀨.

2. Apply power. Within 3 seconds, press and hold Master On (|) button until light

begins ashing. Light will ash 10 times if successfully unpaired.

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev. V3 Date: 02/08/21

User Manual

FUTxxx Series

Linking a Light

1. Press the Link/Unlink button (1).

2. Select the desired zone.

3. Follow the on screen instructions to link the light.

Activating and Controlling a Specic Zone

To activate a specic zone, select one of the available zones and press On button.

Zone is now active and remote commands will only a󰀨ect lights linked to that zone.

Unlinking a Light

1. Make certain the light is powered o󰀨.

2. Press the Link/Unlink button (1).

3. Select the desired zone.

4. Press the unlink button to remove devices from the selected zone.

Dieses Handbuch passt für folgende Modelle

Andere superbrightleds Beleuchtungsausrüstung Handbücher

superbrightleds

superbrightleds EL3-RW Bedienungsanleitung

superbrightleds

superbrightleds WPA-SW Series Bedienungsanleitung

superbrightleds

superbrightleds EPLL Series Bedienungsanleitung

superbrightleds

superbrightleds STN-2-COB Bedienungsanleitung

superbrightleds

superbrightleds RSL Series Bedienungsanleitung

superbrightleds

superbrightleds WIFI-CON Bedienungsanleitung

superbrightleds

superbrightleds DMX-3CH-8A Bedienungsanleitung

superbrightleds

superbrightleds STAC Series Bedienungsanleitung

superbrightleds

superbrightleds ALKW5-RGB45 Bedienungsanleitung

superbrightleds

superbrightleds EL-S Series Bedienungsanleitung

superbrightleds

superbrightleds LPD Series Bedienungsanleitung

superbrightleds

superbrightleds RWLA Series Bedienungsanleitung

superbrightleds

superbrightleds STN-2-TW Bedienungsanleitung

superbrightleds

superbrightleds ALKW8-RGB72 Bedienungsanleitung

superbrightleds

superbrightleds XS-RG Bedienungsanleitung

superbrightleds

superbrightleds NFLSK-W600-VCT Bedienungsanleitung

superbrightleds

superbrightleds MWPE Series Bedienungsanleitung

superbrightleds

superbrightleds HLV5 Series Bedienungsanleitung

superbrightleds

superbrightleds WPGL Series Bedienungsanleitung

superbrightleds

superbrightleds HBU-50K240W Bedienungsanleitung

superbrightleds

superbrightleds WP Series Bedienungsanleitung

superbrightleds

superbrightleds HLV8 Series Bedienungsanleitung

superbrightleds

superbrightleds BRI816-B-D Bedienungsanleitung

superbrightleds

superbrightleds EL2-SW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

superbrightleds FUT Series Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken