Supermicro BPN-SAS2-826EL Series Bedienungsanleitung

Rev. 1.0b

USER'S GUIDE

BPN-SAS2-826EL BAckPLANE

FANFAIL1

OVERHEATFAIL1

5V_LED1

12V_LED1

ACT18

ACT17

C367

C366

C365

C353C352

C134

C133

C132

C121

C120

C119

EC19

R167

J16

J19

PRI_J1

PRI_J0

SEC_J0

SEC_J1

BC8

BC518

C157

C395

FANFAIL_LED_DISABLE

BUZZER_ENB1

MDIO1

MDIO2

ACTLED1

FAN_MONITOR_DISABLE

MH9

MH8

MH7

MH6

MH5

MH4

FAN1

FAN2

FAN3

J18

10 15

25 28

10 15

25 28

SEC_MODE1

SEC_MODE2

Y2 1

EXPDBG1

EXPDBG2

UART_S1 14

UART_P1

PRI_MODE1

PRI_MODE2

PRI_I2C1

R187

JP1

C408

BCA115

BCA121

C265

C72

R305

C128

C130

C362

EC6

EC10

EC11

EC12

EC13

EC14

EC18

EC7

EC8

EC9

+5V +12V

GND GND

PWR1

+5V

+12V

GNDGND

PWR2

+5V

+12V GNDGND

PWR3

SAS CODE

BAR CODE

1.00REV:

BPN-SAS2-826EL2

MACHFINISH

ANGLE

SPECIFIEDDIMENSIONS

UNLESSOTHERWISE

XXX

.010

.03

TOLERANCES

DECIMAL

AREIN INCHES

Teddy/BenDESINGER:

DATE: 2009.12.15

PROJECT NAME:

SANJOSE,CA 95131

DESIGNEDBY SUPERMICRO U.S.A.

www.supermicro.com

TEL:408-503-8000FAX:408-503-8008

SILKSCREEN

PRIMARY-SIDE

UPER

RRRRRRRRRR

WWN

DESIGNED IN USA

REV 1.01

BPN-SAS2-826EL2

BPN-SAS2-826EL Series Backplane User's Guide

Manual Revision 1.0

Release Date: June 26, 2015

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Chapter 1 Safety Guidelines ....................................................................1-1

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

1-4 Introduction to the BPN-SAS2-826EL Backplane ........................................... 1-2

1-5 Overview of the BPN-SAS2-826EL1/EL2 Backplanes ................................... 1-2

Chapter 2 Connectors, Jumper and LEDs..............................................2-1

2-1 Rear Connectors ............................................................................................. 2-1

2-2 RearConnectorandPinDenitions ............................................................... 2-2

2-3 Rear Jumper Locations and Settings.............................................................. 2-3

Explanation of Jumpers .................................................................................. 2-3

2-4 Rear LED Indicators........................................................................................ 2-5

2-5 Front Connectors and LED Indicators ............................................................ 2-6

Chapter 3 Dual Port and Cascading Congurations ............................3-1

3-1 Single and Dual Port Expanders ................................................................... 3-1

Single Ports..................................................................................................... 3-1

Dual Ports ....................................................................................................... 3-1

3-2 Failover............................................................................................................ 3-2

3-3 Failover with RAID Cards and Multiple HBAs ................................................ 3-3

3-4 Cables and Chassis Power Card ................................................................... 3-4

Chassis Power Card ....................................................................................... 3-4

Connecting an Internal Host Bus Adapter to the Backplane ......................... 3-5

Supported Internal HBA to Backplane Cables................................................ 3-6

Connecting an External Host Bus Adapter to the Backplane ........................ 3-7

Supported External HBA to Backplane Cable ................................................ 3-8

Connecting Multiple Backplanes in a Single Channel Environment............... 3-9

SingleHBAConguration ............................................................................... 3-9

SingleHBACongurationCables ................................................................. 3-10

Connecting Multiple Backplanes in a Dual Channel Environment ................3-11

DualHBACongurationCables.................................................................... 3-12

3-5 SupportedCascadingConguration ............................................................ 3-13

ServerSystemwithDualSASHBAandCascadingConguration .............. 3-14

BPN-SAS2-826EL Series Backplane User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning to

the manufacturer, the RMA number should be prominently displayed on the outside

of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

BPN-SAS2-826EL Series Backplane User's Guide

Notes

1-1

Chapter 1 Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufcient to protect your equipment from ESD.

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing a component from the antistatic

bag.

• Handle the backplane by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

• Always disconnect power cables before installing or removing any components

from the computer, including the BPN-SAS2-826EL series backplane.

• Make sure that the backplane is properly and securely on the motherboard to

prevent damage to the system due to power outages.

1-2

BPN-SAS2-826EL Series Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest back-

plane revision available at the time of publishing. The card you have received may

or may not look exactly the same as the graphics shown in this manual.

1-4 Introduction to the BPN-SAS2-826EL Backplane

The SAS2-826EL backplane has been designed to utilize the most up-to-date

technology available, providing your system with reliable, high-quality performance.

ThismanualreectsSAS2-826ELRevision1.01,themostcurrentreleaseavailable

at the time of publication. Always refer to the Supermicro Web site at www.supermi-

cro.comforthelatestupdates,compatiblepartsandsupportedcongurations.

1-5 Overview of the BPN-SAS2-826EL1/EL2 Backplanes

The BPN-SAS2-826EL1 and BPN-SAS2-826EL2 model backplanes are identical,

except that the BPN-SAS2-826EL2 backplane has duplicate secondary components

which are not found on the BPN-SAS2-826EL1. The SBPN-SAS2-826EL2 is divided

into a two sections, with the primary components on the right side of the board and

the secondary components on the left.

2-1

Chapter 2 Connectors, Jumper and LEDs

FANFAIL1

OVERHEATFAIL1

5V_LED1

12V_LED1

ACT18

ACT17

C367

C366

C365

C353C352

C134

C133

C132

C121

C120

C119

EC19

R167

J16

J19

PRI_J1

PRI_J0

SEC_J0

SEC_J1

BC8

BC518

C157

C395

FANFAIL_LED_DISABLE

BUZZER_ENB1

MDIO1

MDIO2

ACTLED1

FAN_MONITOR_DISABLE

MH9

MH8

MH7

MH6

MH5

MH4

FAN1

FAN2

FAN3

J18

10 15

25 28

10 15

25 28

SEC_MODE1

SEC_MODE2

Y2 1

EXPDBG1

EXPDBG2

UART_S1 14

UART_P1

PRI_MODE1

PRI_MODE2

PRI_I2C1

R187

JP1

C408

BCA115

BCA121

C265

C72

R305

C128

C130

C362

EC6

EC10

EC11

EC12

EC13

EC14

EC18

EC7

EC8

EC9

+5V +12V

GND GND

PWR1

+5V

+12V

GNDGND

PWR2

+5V

+12V GNDGND

PWR3

SAS CODE

BAR CODE

1.00REV:

BPN-SAS2-826EL2

MACHFINISH

ANGLE

SPECIFIEDDIMENSIONS

UNLESSOTHERWISE

XXX

.010

.03

TOLERANCES

DECIMAL

AREIN INCHES

Teddy/BenDESINGER:

DATE: 2009.12.15

PROJECT NAME:

SANJOSE,CA 95131

DESIGNEDBY SUPERMICRO U.S.A.

www.supermicro.com

TEL:408-503-8000FAX:408-503-8008

SILKSCREEN

PRIMARY-SIDE

UPER

RRRRRRRRRR

WWN

DESIGNED IN USA

REV 1.01

BPN-SAS2-826EL2

Chapter 2

Connectors, Jumper and LEDs

2-1 Rear Connectors

1. EPP connectors: J16 and J17.

2. Primary and secondary expander

chips

3. Power connectors: PWR1,

PWR2, and PWR3.

4. Fan connectors: Fan1, Fan2, and

Fan3.

5. Primary SAS connector: PRI_J0.

6. Primary SAS connector: PRI_J1.

7. Secondary SAS connector: SEC_

J1 (not available in EL1 single

port backplane).

8. Secondary SAS connector: SEC_

J0 (not available in EL1 single

port backplane).

9. Primary UART connector: UART_

P1, for manufacturer's use only.

10. Secondary UART connector:

UART_S1 for manufacturer's use

only (Not present on SAS2-826-

EL1).

11. Primary MDIO connector: MDIO1

for manufacturer's use only.

12. Secondary MDIO connector:

MDIO2 for manufacturer's use

only (Not present on SAS2-826-

EL1).

13. Primary debug connector: EX-

PDGB1 for manufacturer's use

only.

14. Primary debug connector: EX-

PDGB2 for manufacturer's use

only (Not present on SAS2-826-

EL1)

12 1

Figure 2-1. Connectors and Components

2-2

BPN-SAS2-826EL Series Backplane User's Guide

2-2 RearConnectorandPinDenitions

1. EPP Ports

The EPP ports are used for manufacturer di-

agnostic purposes only.

Backplane

Main Power

4-Pin Connector

Pin#Denition

1+12V

2 and 3 Ground

4 +5V

3. Backplane Main Power Connectors

The 4-pin connectors, designated PWR1,

PWR2, and PWR3, provide power to the

backplane. See the table on the right for pin

denitions.

4. Fan Connectors

The 4-pin connectors, designated Fan1, Fan2,

and Fan3, provide power to the fans. See the

tableontherightforpindenitions.

Fan Connectors

Pin#Denition

1 Ground

2 +12V

3 Tachometer

4 NC

2. Primary and Secondary Expander Chips

This primary and secondary expander chips

allow the backplane to support dual port, cas-

cading,andfailovercongurations.

5. - 8. SAS Ports

Primary and secondary SAS ports.

9. - 10. UART Connectors

Primary and secondary UART connectors: For

manufacturer's use only. Secondary connector

is not present on SAS2-826EL1.

11. - 12. MDIO Connectors

Primary and secondary MDIO connectors. For

manufacturer's use only. Secondary connector

is not present on SAS2-826EL1.

13. - 14. Debug Connectors

Primary and secondary debug connectors. For

manufacturer's use only. Secondary connector

is not present on SAS2-826EL1.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Computerhardware Handbücher

Supermicro

Supermicro SC815 series Bedienungsanleitung

Supermicro

Supermicro AOM-S3108-H8 Bedienungsanleitung

Supermicro

Supermicro MBI-6219B-T41N MicroBlade Bedienungsanleitung

Supermicro

Supermicro AOC-AG-i4S Bedienungsanleitung

Supermicro

Supermicro AOC-S25GC-i4S Bedienungsanleitung

Supermicro

Supermicro H13SSH Bedienungsanleitung

Supermicro

Supermicro AOC-STG-i4T Bedienungsanleitung

Supermicro

Supermicro H13SSL-N Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 5038A-I Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-825TQ Bedienungsanleitung

Supermicro

Supermicro MBB-CMM-6 Bedienungsanleitung

Supermicro

Supermicro AOC-CTGS-i2T Bedienungsanleitung

Supermicro

Supermicro AOC-CTG-b2T Bedienungsanleitung

Supermicro

Supermicro B3SD1-20C-25G Bedienungsanleitung

Supermicro

Supermicro 530AD-I Bedienungsanleitung

Supermicro

Supermicro AOC-R1UG-IBQ Bedienungsanleitung

Supermicro

Supermicro BPN-SAS2-936EL Series Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510D-4C-FN6P Bedienungsanleitung

Supermicro

Supermicro X12SPW-TF Bedienungsanleitung

Supermicro

Supermicro B13SEE-CPU-25G Bedienungsanleitung

Supermicro

Supermicro AOC-PG-i2+ Bedienungsanleitung

Supermicro

Supermicro AOC-A25G-i2SM Bedienungsanleitung

Supermicro

Supermicro AOC-MTGN-i2S Bedienungsanleitung

Supermicro

Supermicro Supero SAS-743TQ Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung