Supermicro BPN-SAS3-815TQ Bedienungsanleitung

BPN-SAS3-815TQ BAckPlANe

USeR'S GUIDe

1.0

+5V

GNDGND+12V

+5V +12V +5V +12V

#3 #0

ACT IN

ACT0 ACT1

JTAG UPGRADE JP29:9071 RST JP18:BUZZER RESET

ACT2 ACT3

SIDEBAND

M15

JP10

JP18

J6 J5

JP29

JP44

R144

MH2

M46

J9 J10 JP26

JP47

JP46

JP42

JP33

JP34

JP40 JP51

REV 1.00

SAS815TQ

UPER

JP50

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: July 14, 2015 mk

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Chapter 1 Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 Version Information ......................................................................................... 1-2

Chapter 2 Connectors, Jumpers and LEDs

2-1 Rear Connector Locations .............................................................................. 2-1

2-2 RearConnectorDenitions............................................................................. 2-2

2-3 RearJumpersandPinDenitions .................................................................. 2-4

Explanation of Jumpers .................................................................................. 2-4

I2C and SGPIO Modes and Jumper Settings ................................................. 2-5

2-4 Rear LED Indicators ...................................................................................... 2-6

2-5 Front Connectors and LED Indicators ............................................................ 2-7

BPN-SAS3-815TQ Backplane Manual

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

Contents

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your vendor

for a Returned Merchandise Authorization (RMA) number. When returning to the

manufacturer, the RMA number should be prominently displayed on the outside of

the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages

incurred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

BPN-SAS3-815TQ Backplane Manual

Notes

1-1

Chapter 1 Guidelines

Chapter 1

Guidelines

This chapter offers guidelines for personal and equipment safety, and notes about

the BPN-SAS3-815TQ version documented in this manual.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent

damage to your system, it is important to handle it very carefully. The following

measuresaregenerallysufcienttoprotectyourequipmentfromESD.

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing a component from the antistatic

bag.

• Handle the backplane by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

• Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

• Disconnect the power cable before installing or removing any cables from the

backplane.

• Make sure that the backplane is securely and properly installed on the

motherboard to prevent damage to the system due to power shortage.

BPN-SAS3-815TQ Backplane Manual

1-2

1-3 Version Information

The BPN-SAS3-815TQ backplane has been designed to utilize the most up-to-date

technology available, providing your system with reliable, high-quality performance.

This manual reflects BPN-SAS3-815TQ, Revision 1.00, the most current

release available at the time of publication. Refer to the Supermicro Web site

at www.supermicro.com for the latest updates, compatible parts and supported

congurations.

2-1

Chapter 2 Connectors, Jumpers and LEDs

+5V

GNDGND+12V

+5V +12V +5V +12V

#3 #0

ACT IN

ACT0 ACT1

JTAG UPGRADE JP29:9071 RST JP18:BUZZER RESET

ACT2 ACT3

SIDEBAND

M15

JP10

JP18

J6 J5

JP29

JP44

R144

MH2

M46

J9 J10 JP26

JP47

JP46

JP42

JP33

JP34

JP40 JP51

REV 1.00

SAS815TQ

UPER

JP50

+5V

GNDGND+12V

+5V +12V +5V +12V

#3 #0

ACT IN

ACT0 ACT1

JTAG UPGRADE JP29:9071 RST JP18:BUZZER RESET

ACT2 ACT3

SIDEBAND

M15

JP10

JP18

J6 J5

JP29

JP44

R144

MH2

M46

J9 J10 JP26

JP47

JP46

JP42

JP33

JP34

JP40 JP51

REV 1.00

SAS815TQ

UPER

JP50

Chapter 2

Connectors, Jumpers and LEDs

This manual covers BPN-SAS3-815TQ enabling SAS3 drives with 12Gbps speeds.

2-1 Rear Connector Locations

The following connectors are on the side of the backplane that faces the rear of the

chassis. They are marked by silkscreen labels.

1. Main Power: JP10 (4 pin)

2. Peripheral power: J9 and J10

(4 pin)

3. JTAG JP47 (10 pin)

4. Upgrade: JP46 (6 pin)

5. MG9071 Chip

6. Sideband JP51 (10 pin)

7. I2C Connector JP44 (4 pin)

8. ACT_IN JP26 (10 pin)

9. SAS Port #0 J5

10. SAS Port #1 J6

11. SAS Port #2 J7

12. SAS Port #3 J8

11 1

Figure 2-1. Rear Connectors

BPN-SAS3-815TQ Backplane Manual

2-2

2-2 RearConnectorDenitions

3, 4. JTAG Connector and Upgrade Connector

The JTAG connector, designated JP47, and the upgrade connector, designated

JP46, are for diagnostic purposes. These connectors should be used by a

certiedandexperiencedtechnician.

5. MG9071 Chip

The MG9071 is an enclosure management chip that supports the SES-2

controller and SES-2 protocols.

Main Power

(JP10)

Pin#Denition

1+12V

2 and 3 Ground

4 +5V

1. Backplane Main Power Connectors

The 4-pin connectors, designated JP10

provide power to the backplane.

2. Peripheral Drive 4-Pin Connectors

The 4-pin connectors, designated J9

and J10, provide power to DVD or other

peripheral drives.

Peripheral Drive Power

(J9 and J10)

Pin#Denition

1 +5V

2 and 3 Ground

4 +12V

6. Sideband Headers

The sideband header is designated JP51.

For SES-2 to work properly, you must

connect an 8-pin sideband cable.

Sideband Header

(JP51)

Pin#Denition Pin#Denition

2 Backplane

Addressing

(SB5)

1 Controller

ID (SB6)

4 Reset (SB4) 3 GND (SB2)

6 GND (SB3) 5 SDA (SB1)

8 Backplane

ID (SB7)

7 SCL (SB0)

10 No Connec-

tion

9 No Connec-

tion

Inhaltsverzeichnis

Andere Supermicro Computerhardware Handbücher

Supermicro

Supermicro AOC-SIM1U-3D Bedienungsanleitung

Supermicro

Supermicro AOC-R1UG-IBQ Bedienungsanleitung

Supermicro

Supermicro X12SDV-4C-SP6F Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 5038A-I Bedienungsanleitung

Supermicro

Supermicro SBI-7126T-S6 Bedienungsanleitung

Supermicro

Supermicro AOC-S3816L-L16iT Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-826A Backplane Bedienungsanleitung

Supermicro

Supermicro AOC-B25G-6CVL Bedienungsanleitung

Supermicro

Supermicro B3SD1-20C-25G Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-F424-A2N2A Bedienungsanleitung

Supermicro

Supermicro SAS-836A Bedienungsanleitung

Supermicro

Supermicro SAS-837A Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-836EL Bedienungsanleitung

Supermicro

Supermicro AOC-SLG3-2H8M2 Bedienungsanleitung

Supermicro

Supermicro AOC-UIBQ-m1 Bedienungsanleitung

Supermicro

Supermicro AOC-A25G-i2SM Bedienungsanleitung

Supermicro

Supermicro B2SC1-CPU Bedienungsanleitung

Supermicro

Supermicro BPN-SAS2-936EL Series Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-846EL Bedienungsanleitung

Supermicro

Supermicro Optane Persistent Memory 200 Series Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -3015A-I Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-119A-N12 Bedienungsanleitung

Supermicro

Supermicro SAS 828TQ Bedienungsanleitung

Supermicro

Supermicro SuperServer 120H-TNR Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung