Supermicro SC721TQ-250B Bedienungsanleitung

SC721 CHASSIS SERIES

SC721TQ-250B

USER’S MANUAL

1.0

Manual Revision 1.0

Release Date: July 22, 2015

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC721 chassis. Installation

and maintenance should be performed by experienced technicians only.

The SC721 chassis is a compact (9.45" tall) mini-tower chassis with rich feature sets.

It supports a wide range of Mini-ITX motherboards from the Intel Atom, to the Core

i7 CPU (Default design for 84W TDP CPU). With 4x 3.5" hot-swappable drives and

1x Low prole AOC slot, the SC721 chassis is ideal for small ofce, home server

and cloud storage applications.

SC721 Chassis Manual

Manual Organization

Chapter 1 Introduction

The rst chapter provides a description of the main components included with this

chassis and describes the main features of the SC721 chassis. This chapter also

includes contact information.

Chapter 2 Standardized Warning Statements for AC

Systems

This chapter lists warnings, precautions, and system safety. It is recommended that

you thoroughly familiarize yourself with the safety precautions before installing and

servicing this chassis.

Chapter 3 System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4 Chassis Setup and Maintenance

Follow the procedures given in this chapter when installing, removing, or

reconguring your chassis.

Appendix A Chassis Cables, Screws and Other

Accessories

Appendix B Power Supply Specications

Appendix C BPN-SAS-733TQ Backplane Specications

Preface

Contents

Preface

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping Lists.................................................................................................. 1-1

1-3 Contacting Supermicro.................................................................................... 1-2

1-4 Returning Merchandise for Service................................................................. 1-3

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components

3-1 Components.................................................................................................... 3-1

Drive Bays....................................................................................................... 3-1

Motherboard Support ...................................................................................... 3-1

Power Supply.................................................................................................. 3-1

Fans ................................................................................................................ 3-1

PCI Slots ......................................................................................................... 3-1

Control Panel Buttons and LED Indicators..................................................... 3-2

3-2 Unpacking the System .................................................................................... 3-2

3-3 Where to Get Replacement Components....................................................... 3-2

SC721 Chassis Manual

Chapter 4 System Interface

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

4-3 Control Panel LEDs ........................................................................................ 4-2

Overheating..................................................................................................... 4-3

Chapter 5 Chassis Setup and Maintenance

5-1 Overview ......................................................................................................... 5-1

5-2 Removing Power from the System ................................................................. 5-1

5-3 Removing the Chassis Cover ......................................................................... 5-2

5-4 Removing and Installing Hard Drives ............................................................. 5-3

5-5 Installing the Internal Fixed Hard Drives......................................................... 5-6

5-6 Installing the Side Mounted Fixed Hard Drive................................................ 5-7

5-7 Installing the I/O Shield and Motherboard ...................................................... 5-8

I/O Shield and Motherboard Installation ......................................................... 5-8

5-8 Hardware Security ....................................................................................... 5-10

Front Bezel Lock........................................................................................... 5-10

Rear Chassis Hasp ....................................................................................... 5-10

Kensington Cable Slot (K-Slot) ......................................................................5-11

5-9 Installing the DVD-ROM Drive ...................................................................... 5-12

5-10 Installing Expansion Cards ........................................................................... 5-14

5-11 Installing the Rear Exhaust Fan ................................................................... 5-15

5-12 Replacing the Power Supply ....................................................................... 5-16

5-13 Replacing the Backplane ............................................................................. 5-17

Appendix A Cables, Screws, and Other Accessories

Appendix B SC721 Power Supply Specications

Appendix C BPN-SAS-733TQ Backplane Specications

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC721 chassis features a unique and highly-optimized design, allow-

ing most conguration of the chassis to be accomplished without tools or screws.

The chassis is equipped with high-efciency power supply. High-performance fans

provide ample optimized cooling for FB-DIMM memory modules, and four hot-swap

drive bays offer maximum storage capacity (Default Design for 84W TDP CPU).

1-2 Shipping Lists

Please visit the following link for the latest shiping lists and part numbers for your

particular chassis model www.supermicro.com.

Chapter 1: Introduction

1-1

SC721 Chassis

Model Drives PCI

Slots Power Supply

SC721TQ-250B 4x 3.5" hot-swap HDD carriers

2x 2.5" xed HDD brackets 1x FF

250W

High-efciency

80 Plus Bronze Certied

SC721 Chassis Manual

1-2

1-3 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

1-3

Chapter 1: Introduction

1-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the chassis in the original Supermicro carton, using the

original packaging material. If these are no longer available, be sure to pack the

chassis securely, using packaging material to surround the chassis so that it does

not shift within the carton and become damaged during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems

SC721 Chassis Manual

1-4

Notes

Inhaltsverzeichnis

Andere Supermicro Computerhardware Handbücher

Supermicro

Supermicro Optane Persistent Memory 200 Series Bedienungsanleitung

Supermicro

Supermicro X12SDV-4C-SP6F Bedienungsanleitung

Supermicro

Supermicro AOC-MTGN-i2S Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -3015A-I Bedienungsanleitung

Supermicro

Supermicro AOC-SLG2-2TM2 Bedienungsanleitung

Supermicro

Supermicro AOM-C25G-i2SM-12 Bedienungsanleitung

Supermicro

Supermicro AOC-PG-i2+ Bedienungsanleitung

Supermicro

Supermicro AOC-STGC-i2T Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-743A Bedienungsanleitung

Supermicro

Supermicro MBI-6219B-T41N MicroBlade Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-119A-N12 Bedienungsanleitung

Supermicro

Supermicro B13SEG Bedienungsanleitung

Supermicro

Supermicro Super C9X299-PGF Bedienungsanleitung

Supermicro

Supermicro MBB-CMM-6 Bedienungsanleitung

Supermicro

Supermicro H13SST-G Bedienungsanleitung

Supermicro

Supermicro X11DPI-N-O Bedienungsanleitung

Supermicro

Supermicro A3SEV-2C-LN4 Bedienungsanleitung

Supermicro

Supermicro AOC-A25G-i2SM Bedienungsanleitung

Supermicro

Supermicro AOC-B25G-6CVL Bedienungsanleitung

Supermicro

Supermicro B2SC1-CPU Bedienungsanleitung

Supermicro

Supermicro AOC-SLG3-4E4R Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-116A-N10 Bedienungsanleitung

Supermicro

Supermicro AOM-S3108-H8 Bedienungsanleitung

Supermicro

Supermicro B2SS2-F Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung