Supermicro MicroBlade MBI-6118D-T2 Bedienungsanleitung

MBI-6118D-T2/T4/T2H/T4H

MicroBlade Module

User’s Manual

Revison 1.0b

MBI-6118D-T2/T2H MBI-6118D-T4/T4H

MBI-6118D-T2/T4/T2H/T4H MicroBlade Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, and

makes no commitment to update or to keep current the information in this manual, or to notify any person

or organization of the updates. Please Note: For the most up-to-date version of this manual, please

see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT,

INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR

RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in industrial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the manufacturer’s instruction manual, may cause harmful interference with radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case you

will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

Manual Revison 1.0b

Release Date: June 26, 2020

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document. Information in this document is subject to change without notice. Other

products and companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of the Supermicro MBI-6118D-T2/T4/T2H/T4H MicroBlade module.

Installation and maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with

MBI-6118D-T2/T4/T2H/T4H MicroBlade module and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing MBI-6118D-T2/T4/

T2H/T4H MicroBlade module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the MBI-6118D-T2/T4/T2H/T4H MicroBlade

module into the MicroBlade chassis. Other sections cover the installation and placement

of memory modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about MBI-6118D-T2/T4/T2H/

T4H MicroBlade module. Included here are descriptions and information for mainboard

components, connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for MBI-6118D-T2/T4/T2H/T4H MicroBlade

module.

Appendix A: BIOS POST Codes

BIOS POST Codes for MBI-6118D-T2/T4/T2H/T4H MicroBlade module are explained in

this appendix.

Secure Data Deletion

A secure data deletion tool designed to fully erase all data from storage devices can be

found on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/

wftp/utility/Log9_Secure_Data_Deletion_Utility/

MBI-6118D-T2/T4/T2H/T4H MicroBlade Module User’s Manual

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Blade Module Features ....................................................................1-2

Processors ..............................................................................................1-2

Memory ................................................................................................... 1-2

Storage ...................................................................................................1-3

RAID .......................................................................................................1-3

Density ....................................................................................................1-3

BMC Password ....................................................................................... 1-3

1-3 Contacting Supermicro..................................................................... 1-4

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements .....................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker ........................................................................................2-4

Power Disconnection Warning ................................................................ 2-5

Equipment Installation.............................................................................2-6

Restricted Area ....................................................................................... 2-7

Battery Handling ..................................................................................... 2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage ................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning .........................................................................2-14

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing MicroBlade Modules ........................................................3-1

Powering Up a MicroBlade Module Unit .................................................3-1

Powering Down a MicroBlade Module Unit............................................. 3-1

Removing a MicroBlade Module Unit from the Enclosure ......................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Onboard Battery Installation............................................................3-3

3-4 Memory Installation...........................................................................3-4

MBI-6118D-T2/T4/T2H/T4H MicroBlade Module User’s Manual

Populating Memory Slots ........................................................................3-4

DIMM Installation ....................................................................................3-5

3-5 Hard Disk Drive Installation .............................................................3-6

3-6 Installing the Operating System......................................................3-6

Installing via PXE Boot............................................................................3-6

Installing via Virtual Media (Drive Redirection) .......................................3-7

Chapter 4 MicroBlade Module Features ................................. 4-1

4-1 Control Panel .....................................................................................4-2

Power Button ..........................................................................................4-3

LED Indicators ........................................................................................4-3

4-2 Serverboard .......................................................................................4-4

Jumpers ..................................................................................................4-5

CMOS Clear............................................................................................4-5

4-3 Blade Unit Components ................................................................... 4-6

Memory Support .....................................................................................4-7

Hard Disk Drives .....................................................................................4-7

Chapter 5 BIOS....................................................................................... 5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility .........................................................................5-1

5-2 BIOS Updates....................................................................................5-2

Flashing BIOS.........................................................................................5-2

5-3 Running Setup ...................................................................................5-3

5-4 Main BIOS Setup...............................................................................5-4

5-5 Advanced Setup ................................................................................5-5

5-6 Event Logs Setup............................................................................5-14

5-7 IPMI Setup........................................................................................ 5-15

5-8 Boot ...................................................................................................5-16

5-9 Security .............................................................................................5-16

5-10 Save & Exit.....................................................................................5-17

Appendix A AMI UEFI BIOS POST Codes..............................A-1

A-1 Checkpoint Ranges ..........................................................................A-1

A-2 Standard Checkpoints......................................................................A-2

A-3 OEM-Reserved Checkpoint Ranges .............................................A-9

1-1

Chapter 1

Introduction

1-1 Overview

This user’s manual covers the MBI-6118D-T2/T4/T2H/T4H MicroBlade module. This

MicroBlade module is a compact self-contained server that connects into a pre-cabled

enclosure that provides power, cooling, management and networking functions. One

enclosure for the MBI-6118D-T2/T4/T2H/T4H MicroBlade module can hold twenty-eight

blade units.

In this manual, “blade system” refers to the entire system (including the enclosure and

blade240-pin VLP UDIMMs units), “blade”, “MicroBlade” or “blade unit” refers to a single

MicroBlade module and “blade enclosure” is the chassis that the MicroBlades, power

supplies and MicroBlade modules are housed within.

Please refer to our web site for information on operating systems that have been

certified for use with the MicroBlade (http://www.supermicro.com/products/nfo/

microblade.cfm).

Note: For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.MicroBlade.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information: http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

support@supermicor.com

Note: A complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm.

MBI-6118D-T2/T4/T2H/T4H MicroBlade Module User’s Manual

1-2

1-2 Blade Module Features

Table 1-1 lists the main features of the MBI-6118D-T2/T4/T2H/T4H MicroBlade module.

See the proceeding section for components typically included in a blade system and

other optional components. Specific details for the MBI-6118D-T2/T4/T2H/T4H

MicroBlade module are found in Chapter 4: "MicroBlade Module Features" on page 4-1.

Processors

The MBI-6118D-T2/T4/T2H/T4H MicroBlade module supports one LGA2011 Intel Xeon

E3-1200 v3/v4 series processor in an LGA2011 socket embedded in the motherboard.

The MBI-6118D-T2H/T4H MicroBlade modules additionally also support graphics for

VDI (Virtual Desk Interface) and VHD (Virtual Hosted Desktop).

Refer to the Supermicro web site for a complete listing of supported processors (http://

www.supermicro.com/products/microblade). Please note that you will need to check the

detailed specifications of a particular blade module for a list of the CPUs it supports.

Details on installation of the processor into the MBI-6118D-T2/T4/T2H/T4H MicroBlade

module are found in Chapter 3: " Setup and Installation" on page 3-1.

Memory

Each MBI-6118D-T2/T4/T2H/T4H MicroBlade module has four (4) 240-pin VLP UDIMM

sockets that can support up to 32 GB VLP ECC UDIMM of DDR3 1600/1333 MHz

speed, 8 GB and 4 GB size VLP DIMM memory. Memory is interleaved, which requires

both modules to be of the same size and speed.

Table 1-1. MBI-6118D-T2/T4/T2H/T4H MicroBlade Module Specification

Features

Serverboard B1SL1-F (proprietary form factor)

Enclosures MBE-628D-416/816

Chassis Specifications

Chassis Dimensions (HxWxD): 1.2" x 4.94" x 23.2" (30.48-mm x

125.476-mm x 589.28-mm), Gross Weight: 5.67 lbs (2.57 kg) for

MBI-6118D-T2/T2H or 5.01 lbs (2.27 kg) for MBI-6118D-T4/T4H

Processors One Intel®Xeon®E3-1200 v3/v4 embedded in an LGA2011 socket on the

serverboard.

Chipset Intel C612

BIOS 128 MB SPI Flash EEPROM with AMI® BIOS

Memory Capacity

Supports up to 32 GB VLP ECC UDIMM of DDR3 1600/1333 MHz speed

and 8 GB and 4 GB size VLP DIMM memory in four (4) 240-pin DIMM

sockets

Hard Drive Bays

The blade module supports either of two configurations:

• Up to two (2) 3.5" SATA3 HDD/SDD drives (MBI-6118D-T2/T2H)

• Up to four (4) 2.5" SATA3 HDD/SDD drives (MBI-6118D-T4/T4H)

1-3

Chapter 1: Introduction

Please refer to the Supermicro web site for a list of supported memory http://

www.supermicro.com/products/microblade/ The detailed specifications for a blade

module will contain a link to a list of recommended memory sizes and manufacturers.

Details on installation of memory modules into the MBI-6118D-T2/T4/T2H/T4H

MicroBlade module are found in Chapter 3: " Setup and Installation" on page 3-1.

Storage

The MBI-6118D-T2/T4/T2H/T4H MicroBlade module has either four (4) 2.5" SATA3

HDD/SDD or two (2) 3.5" SATA3 HDD/SDD internally mounted drives. See Chapter 3: "

Setup and Installation" on page 3-1 for storage installation details.

RAID

The MBI-6118D-T2 MicroBlade module has only two hard drives, so only a RAID 0 or 1

array is possible. The MBI-6118D-T4 has four drives, so RAID 0, 1, 5 and 10 are

possible.

Density

A maximum of twenty-eight blade modules may be installed into a single blade

enclosure. Each blade enclosure is a 6U form factor, so a standard 42U rack may

accommodate up to seven enclosures with 196 blade modules, the equivalent of 784 1U

servers. With the inclusion of up to fourteen CMM modules and up to twenty-eight

Gigabit Ethernet switches this would occupy up to 826U space in a conventional 1U

server configuration.

BMC Password

For security, each blade unit is assigned a unique default BMC password for the ADMIN

user. It can be found on a sticker on the blade service tab, and a sticker on the

motherboard. The sticker also displays the BMC MAC address. For more information,

refer to our website at https://www.supermicro.com/en/support/

BMC_Unique_Password. The service tab and an example sticker are illustrated below.

Service Tab

Password

Sticker

MBI-6118D-T2/T4/T2H/T4H MicroBlade Module User’s Manual

1-4

1-3 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

‘s-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email:

[email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacific

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 23511

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Website: www.supermicro.com.tw

Technical Support:

Email: [email protected]w

Tel: +886-(2)-8226-3990

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Steuereinheit Handbücher

Supermicro

Supermicro AOC-A100G-b2CM Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6118G-T81X Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6219G-T8HX Bedienungsanleitung

Supermicro

Supermicro AOM-TPM-9670V Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6219G-T7LX Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-4119MG-X Bedienungsanleitung

Supermicro

Supermicro SUPERO C9Z590-CG Bedienungsanleitung

Supermicro

Supermicro SBI-7147R-S4F Bedienungsanleitung

Supermicro

Supermicro SBI-4429P-T2N Bedienungsanleitung

Supermicro

Supermicro SBI-6129P-T3N Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6119M-T2N Bedienungsanleitung

Supermicro

Supermicro MicroBlade 6119M-T2N Bedienungsanleitung

Supermicro

Supermicro SBI-7147R-S4X Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6218G-T41X Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-6119P-T3N Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6119G-C4 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-6419P-C3N Bedienungsanleitung

Supermicro

Supermicro HK030 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-8149P-C4N Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6218G-T81X Bedienungsanleitung

Supermicro

Supermicro SBA-7141M-T Bedienungsanleitung

Supermicro

Supermicro TPM9670 Bedienungsanleitung

Supermicro

Supermicro MBI-6418A-T5H Bedienungsanleitung

Supermicro

Supermicro MBI-6128R-T2 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung