Supermicro MicroBlade MBI-6219G-T8HX Bedienungsanleitung

MBI-6219G-T8HX

MBI-6119G-T8HX

MicroBlade™ Module

User’s Manual

Revison 1.0a

MBI-6219G-T8HX /MBI-6119G-T8HX Blade Server Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY

EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revison 1.0a

Release Date: September 6, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of both the Supermicro MBI-6219G-T8HX and

MBI-6119G-T8HXMicroBlade modules. Installation and maintenance should be

performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the

MicroBlade modules and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the MicroBlade

modules.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the MicroBlade modules into the MicroBlade

chassis. Other sections cover the installation and placement of memory modules and

the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about the MicroBlade modules.

Included here are descriptions and information for mainboard components, connectors,

LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for the MicroBlade modules.

Appendix A: BIOS POST Codes

BIOS POST Codes for the MicroBlade modules are explained in this appendix.

MBI-6219G-T8HX /MBI-6119G-T8HX Blade Server Module User’s Manual

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview............................................................................................. 1-1

1-2 Blade Module Features .................................................................... 1-2

Blade Enclosures ....................................................................................1-3

Processors ..............................................................................................1-3

Memory ...................................................................................................1-3

Storage ...................................................................................................1-4

RAID .......................................................................................................1-4

Density ....................................................................................................1-4

1-3 Contacting Supermicro.....................................................................1-5

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements .....................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker ........................................................................................2-4

Power Disconnection Warning ................................................................2-5

Equipment Installation............................................................................. 2-6

Restricted Area .......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage ................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning.........................................................................2-14

Power Cable and AC Adapter ..............................................................2-15

Hot Swap Fan Warning ........................................................................2-17

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview............................................................................................. 3-1

3-2 Installing MicroBlade Modules ........................................................ 3-1

Powering Up a MicroBlade Module Unit .................................................3-1

Powering Down a MicroBlade Module Unit.............................................3-1

Removing a MicroBlade Module Unit from the Enclosure ......................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Onboard Battery Installation............................................................3-3

MBI-6219G-T8HX /MBI-6119G-T8HX Blade Server Module User’s Manual

3-4 Memory Installation...........................................................................3-4

Populating Memory Slots ........................................................................3-4

Memory Support .....................................................................................3-4

DIMM Installation .................................................................................... 3-5

3-5 Hard Disk Drive Installation .............................................................3-7

3-6 Installing the Operating System......................................................3-7

Installing with a SATA-DOM Module .......................................................3-7

Installing via PXE Boot............................................................................3-7

Installing via Virtual Media (Drive Redirection) .......................................3-7

Chapter 4 MicroBlade Module Features .................................4-1

4-1 Control Panel .....................................................................................4-2

Power Button ..........................................................................................4-3

LED Indicators ........................................................................................4-3

4-2 Serverboard .......................................................................................4-4

Jumpers ..................................................................................................4-6

CMOS Clear............................................................................................4-6

4-3 Blade Unit Components ...................................................................4-7

Memory Support .....................................................................................4-8

Hard Disk Drives .....................................................................................4-9

Blade Power Consumption Page............................................................4-9

Chapter 5 BIOS.......................................................................................5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility .........................................................................5-1

5-2 BIOS Updates.................................................................................... 5-2

Flashing a BIOS using a Floppy Image File............................................5-2

5-3 Running Setup...................................................................................5-2

5-4 Main BIOS Setup...............................................................................5-3

5-5 Advanced Setup ................................................................................5-5

5-6 Event Logs Setup............................................................................5-17

5-7 IPMI Setup........................................................................................5-18

5-8 Security .............................................................................................5-19

5-9 Boot ...................................................................................................5-19

5-10 Save & Exit.....................................................................................5-20

vii

Appendix A AMI UEFI BIOS POST Codes..............................A-1

A-1 Checkpoint Ranges ..........................................................................A-1

A-2 Standard Checkpoints......................................................................A-2

A-3 OEM-Reserved Checkpoint Ranges .............................................A-9

MBI-6219G-T8HX /MBI-6119G-T8HX Blade Server Module User’s Manual

viii

Notes

1-1

Chapter 1: Introduction

Chapter 1

Introduction

1-1 Overview

This user’s manual covers the MBI-6219G-T8HX/MBI-6119G-T8HX MicroBlade module.

This MicroBlade module is a compact self-contained server that connects into a

pre-cabled enclosure that provides power, cooling, management and networking

functions. One enclosure for the MBI-6219G-T8HX/MBI-6119G-T8HX MicroBlade

module can hold twenty-eight blade units.

In this manual, “blade system” refers to the entire system (including the enclosure and

blades units), “blade”, “MicroBlade” or “blade unit” refers to a single MicroBlade module

and “blade enclosure” is the chassis that the MicroBlades, power supplies and

MicroBlade modules are housed within.

Please refer to our web site for information on operating systems that have been

certified for use with the MicroBlade (http://www.supermicro.com/products/nfo/

microblade.cfm).

Note: For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.MicroBlade.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information: http://www.supermicro.com/about/policies/

safety_information.cfm

• If you have any questions, please contact our support team at:

support@supermicro.com

Note: A complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm.

MBI-6219G-T8HX/MBI-6119G-T8HX MicroBlade Module User’s Manual

1-2

1-2 Blade Module Features

Table 1-1 lists the main features of the MBI-6219G-T8HX/MBI-6119G-T8HX MicroBlade

module. See the proceeding section for components typically included in a blade system

and other optional components. Specific details for the MBI-6219G-T8HX/

MBI-6119G-T8HX MicroBlade module are found in Chapter 4: "MicroBlade Module

Features" on page 4-1. The only difference between the two MicroBlade modules is that

the MBI-6119G-T8HX MicroBlade module has one node and the B2SS1-H-MTF

serverboard, while the MBI-6219G-T8HXMicroBlade module has two nodes and the

B2SS2-H-MTF serverboard.

Table 1-1. MBI-6219G-T8HX/MBI-6119G-T8HX MicroBlade Module

Specification Features

Serverboard B2SS1-H-MTF (MBI-6119G-T8HX), B2SS2-H-MTF (MBI-6219G-T8HX)/

(proprietary form factor)

Blade System Enclosures See the Blade Enclosures section below for a full list of MicroBlade

enclosures.

Chassis Specifications Chassis Dimensions (HxWxD): 1.2" x 4.94" x 23.2" (30.48-mm x

125.476-mm x 589.28-mm), Gross Weight: 7.5 lbs (3.4 kg)

Processors

One (1) or Two (2) Intel®Xeon®E3-1585 V5 embedded processor in an

FCBGA1440 socket on the serverboard. See Processors section below for

details.

Chipset Intel C236

BIOS 128 MB SPI Flash EEPROM with AMI® BIOS

Memory Capacity Supports up to 32 GB SODIMM DDR4 2133 MHz speed and 16 GB size

SODIMM memory in two (2) FCBGA1440 DIMM sockets

Hard Drive Bays

The blade module supports one (1) 2.5" SATA3 HDD/SSD disk drive per

node. Additionally, two (2) M.2 and one (1) SATA-DOM connectors are

also available per node.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Steuereinheit Handbücher

Supermicro

Supermicro MicroBlade MBI-6218G-T81X Bedienungsanleitung

Supermicro

Supermicro SBI-7228R-T2X Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6219G-T7LX Bedienungsanleitung

Supermicro

Supermicro MCP-220-00119-0B Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-6119P-T3N Bedienungsanleitung

Supermicro

Supermicro MicroBlade 6119M-T2N Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6118G-T81X Bedienungsanleitung

Supermicro

Supermicro SBI-7126TG Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-8149P-C4N Bedienungsanleitung

Supermicro

Supermicro MBI-6418A-T5H Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7228R-T2F2 Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6118D-T2 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7128R-C6N Bedienungsanleitung

Supermicro

Supermicro Supero SAS-836TQ Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-4119MG-X Bedienungsanleitung

Supermicro

Supermicro SBI-6129P-T3N Bedienungsanleitung

Supermicro

Supermicro SUPERO C9Z590-CG Bedienungsanleitung

Supermicro

Supermicro SBA-7141M-T Bedienungsanleitung

Supermicro

Supermicro TPM9670 Bedienungsanleitung

Supermicro

Supermicro AOC-MTG-i2T2S Bedienungsanleitung

Supermicro

Supermicro AOC-ATG-i2T2SM Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6119G-C2 Bedienungsanleitung

Supermicro

Supermicro SBI-6419P-T3N Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-6419P-C3N Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung