Supermicro SC846E1-R710B Bedienungsanleitung
SC846 CHASSIS SERIES
USER’S MANUAL
1.0d
SUPER ®
SC846TQ-R900B SC846E1-R710B
SC846E1-R900B SC846E2-R900B
SC846 Chassis Manual
ii
Manual Revision 1.0d
Release Date: December 29, 2008
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for
all claims will not exceed the price paid for the hardware product.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2008 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SC846 chassis. Installation
and maintenance should be performed by experienced technicians only.
This manual lists compatible parts available when this document was published. Al-
ways refer to the our Web site for updates on supported parts and congurations.
SC846 Chassis Manual
iv
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with this
chassis and describes the main features of the SC846 chassis. This chapter also
includes contact information.
Chapter 2: System Safety
This chapter lists warnings, precautions, and system safety. It recommended that
you thoroughly familiarize yourself installing and servicing this chassis safety pre-
cautions.
Chapter 3: Chassis Components
Refer here for details on this chassis model including the fans, bays, airow shields,
and other components.
Chapter 4: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 5: Chassis Setup and Maintenance
Follow the procedures given in this chapter when installing, removing, or
reconguring your chassis.
Chapter 6: Rack Installation
Refer to this chapter for detailed information on chassis rack installation. You should
follow the procedures given in this chapter when installing, removing or reconguring
your chassis into a rack environment.
v
Preface
This section lists compatible cables, power supply specications, and compatible
backplanes. Not all compatible backplanes are listed. Refer to our Web site for the
latest compatible backplane information.
Appendix A: Hardware
This section provides information on cabling, and other hardware which is compat-
ible with your chassis. For complete information on supported cables and hardware,
refer to the Supermico Web site at www.supermicro.com.
Appendix B: Power Supply Specications
This chapter lists the specications of the power supply provided with your chas-
sis. For additional information, refer to the Supermicro website at www.supermicro.
com.
Appendix C: SAS-846TQ Backplane Specications
This section contains detailed specications on the backplane for the SC846TQ
chassis systems. Additional information can be found on the Supermicro Web site
at www.supermicro.com.
Appendix D: SAS-846EL Backplane Specications
This section contains detailed specications on the backplane for the SC846EL
chassis systems. Additional information can be found on the Supermicro Web site
at www.supermicro.com.
SC846 Chassis Manual
vi
Table of Contents
Chapter 1 Introduction
1-1 Overview ......................................................................................................... 1-1
1-2 Shipping List.................................................................................................... 1-1
Part Numbers .................................................................................................. 1-1
1-3 Where to get Replacement Components........................................................ 1-2
1-4 Contacting Supermicro.................................................................................... 1-3
1-5 Returning Merchandise for Service................................................................. 1-4
Chapter 2 System Safety
2-1 Overview ......................................................................................................... 2-1
2-2 Warnings and Precautions .............................................................................. 2-1
2-3 Preparing for Setup......................................................................................... 2-1
2-4 Electrical Safety Precautions .......................................................................... 2-1
2-5 General Safety Precautions ............................................................................ 2-3
2-6 System Safety ................................................................................................. 2-3
Chapter 3 System Interface
3-1 Overview ......................................................................................................... 3-1
3-2 Control Panel Buttons ..................................................................................... 3-2
3-3 Control Panel LEDs ........................................................................................ 3-2
3-4 Drive Carrier LEDs.......................................................................................... 3-4
SAS/SATA Drives ............................................................................................ 3-4
SCSI Drives..................................................................................................... 3-4
Chapter 4 Chassis Setup and Maintenance
4-1 Overview ......................................................................................................... 4-1
4-2 Removing the Chassis Cover ......................................................................... 4-2
4-3 Installing Hard Drives...................................................................................... 4-3
4-4 Installing the Motherboard .............................................................................. 4-6
I/O Shield ........................................................................................................ 4-6
Permanent and Optional Standoffs................................................................. 4-7
Add-on Card/Expansion Slot Setup ................................................................ 4-9
4-5 Installing the Air Shroud................................................................................ 4-10
4-6 Checking the Server's Air Flow......................................................................4-11
4-7 System Fans ................................................................................................. 4-12
4-8 Power Supply ............................................................................................... 4-14
4-9 Changing the Power Distributor.................................................................... 4-17
vii
Preface
4-10 Changing the CD-ROM, DVD-ROM, or Floppy Drive and HDD trays.......... 4-19
4-11 Accessing the Backplane.............................................................................. 4-22
Chapter 5 Rack Installation
5-1 Overview ......................................................................................................... 5-1
5-2 Unpacking the System .................................................................................... 5-1
5-3 Preparing for Setup......................................................................................... 5-1
Choosing a Setup Location............................................................................. 5-1
Rack Precautions ............................................................................................ 5-2
General Server Precautions............................................................................ 5-2
Rack Mounting Considerations ....................................................................... 5-3
Ambient Operating Temperature ................................................................ 5-3
Reduced Airow ......................................................................................... 5-3
Mechanical Loading ................................................................................... 5-3
Circuit Overloading..................................................................................... 5-3
Reliable Ground ......................................................................................... 5-3
5-4 Rack Mounting Instructions............................................................................. 5-4
Rack Rails Assembly ...................................................................................... 5-4
Identifying the Inner Rack Rails ................................................................. 5-4
Appendix A SC846 Cables and Hardware
Appendix B SC846 Power Supply Specications
Appendix C BPN-SAS-846TQ Backplane Specications
Appendix D BPN-SAS-846EL Backplane Specications
SC846 Chassis Manual
viii
Notes
Chapter 1
Introduction
1-1 Overview
Supermicro’s SC846 4U chassis features a unique and highly-optimized design.
The chassis is equipped with high efciency power supply. High-performance fans
provide ample optimized cooling for FB-DIMM memory modules and twenty-four
hot-swappable drive bays offer maximum storage capacity.
1-2 Shipping List
Part Numbers
Please visit the following link for the latest shiping lists and part numbers for your
particular chassis model http://www.supermicro.com/
Chapter 1: Introduction
1-1
SC846 Chassis
Model CPU HDD I/O Slots Power
Supply
SC846STQ-R900B DP Xeon 24x SAS/
SATA 7x FF 900W
(Redundant)
SC846E1-R900B DP Xeon 24x SAS 7x FF 900W
(Redundant)
SC846E2-R900B DP Xeon 24x SAS 7x FF 900W
(Redundant)
SC946E1-R710B DP Xeon 24x SAS 7x FF 710W
(Redundant)
SC846 Chassis Manual
1-2
1-3 Where to get Replacement Components
Though not frequently, you may need replacement parts for your system. To en-
sure the highest level of professional service and technical support, we strongly
recommend purchasing exclusively from our Supermicro Authorized Distributors/
System Integrators/Resellers. A list of Supermicro Authorized Distributors/System
Integrators/Resellers can be found at: http://www.supermicro.com. Click the Where
to Buy link.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Supermicro Gehäuse Handbücher
Supermicro
Supermicro SC216BE1C-R741JBOD Bedienungsanleitung
Supermicro
Supermicro SC417BE1C-R1K23JBOD Bedienungsanleitung
Supermicro
Supermicro SC836 Series Bedienungsanleitung
Supermicro
Supermicro SC946ED-R2KJBOD Bedienungsanleitung
Supermicro
Supermicro SC216B JBOD Series Bedienungsanleitung
Supermicro
Supermicro SuperBlade 6U Bedienungsanleitung
Supermicro
Supermicro SC847E1C Series Bedienungsanleitung
Supermicro
Supermicro SC846B JBOD Bedienungsanleitung
Supermicro
Supermicro SuperServer SYS-621BT-DNC8R Bedienungsanleitung
Supermicro
Supermicro MicroBlade MBE-628E-422 Bedienungsanleitung
