Supermicro 1027R-73DAF Bedienungsanleitung

SUPERSERVER

1027R-73DAF

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: December 18, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 1027R-73DAF.

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 1027R-73DAF is a high-end server based on the SC113TQ-563CB

1U rackmountable chassis and the X9DRD-7LN4F dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9DRD-7LN4F serverboard

and the SC113TQ-563CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 1027R-73DAF

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1027R-73DAF.

SUPERSERVER 1027R-73DAF User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRD-7LN4F serverboard, in-

cluding the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC113TQ-563CB server chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring SAS/SATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SAS.................................................................................................................1-2

Serial ATA........................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

Rear I/O Ports.................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Inner Rails.......................................................................................................2-5

Outer Rails......................................................................................................2-6

Installing the Server into a Telco Rack...........................................................2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

SUPERSERVER 1027R-73DAF User's Manual

vii

Power..............................................................................................................3-1

UID..................................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Information LED.............................................................................................. 3-2

NIC1................................................................................................................3-3

NIC2................................................................................................................3-3

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 Hard Drive Carrier LEDs.................................................................................3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel.........................................................................5-2

5-3 Rear I/O Ports.................................................................................................5-3

5-4 Installing the Processor and Heatsink ............................................................5-4

Installing an LGA 2011 Processor...................................................................5-4

Installing a Passive CPU Heatsink .................................................................5-7

Removing the Heatsink...................................................................................5-7

5-5 Installing Memory............................................................................................ 5-8

Table of Contents

viii

SUPERSERVER 1027R-73DAF User's Manual

Memory Support..............................................................................................5-8

DIMM Installation ............................................................................................ 5-8

5-6 Adding PCI Add-On Cards............................................................................ 5-12

5-7 Serverboard Details ...................................................................................... 5-13

X9DRD-7LN4F Quick Reference..................................................................5-14

5-8 Connector Deﬁnitions ...................................................................................5-16

5-9 Jumper Settings............................................................................................ 5-23

5-10 Onboard Indicators........................................................................................5-25

5-11 SATA and SAS Ports.....................................................................................5-26

5-12 Installing Software......................................................................................... 5-27

SuperDoctor III..............................................................................................5-28

5-13 Onboard Battery............................................................................................ 5-30

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Cooling............................................................................................... 6-2

System Fan Failure.........................................................................................6-2

6-4 Drive Bay Installation/Removal.......................................................................6-4

Accessing the Drive Bays............................................................................... 6-4

Hard Drive Installation.....................................................................................6-4

DVD Drive Installation.....................................................................................6-6

6-5 Power Supply..................................................................................................6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-2

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup......................................................................................................7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs.................................................................................................... 7-25

7-5 IPMI............................................................................................................... 7-27

7-6 Boot............................................................................................................... 7-29

7-7 Security.........................................................................................................7-30

7-8 Save & Exit................................................................................................... 7-31

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 1027R-73DAF is a high-end server comprised of two main sub-

systems: the SC113TQ-563CB 1U server chassis and the X9DRD-7LN4F dual

processor serverboard. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 1027R-73DAF, as listed below:

• Six 4-cm counter-rotating fans (FAN-0086L4)

• Two passive CPU heatsinks (SNK-P0047PS)

• One air shroud (MCP-310-19010-0N)

• One riser card (RSC-RR1U-E8)

• SATA Accessories

One SATA backplane (BPN-SAS-113TQ)

Eight drive carriers (MCP-220-00047-0B)

• One rackmount kit (MCP-290-00043-0N)

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1027R-73DAF User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 1027R-73DAF lies the X9DRD-7LN4F, a dual

processor serverboard based on the Intel C602J chipset and designed to provide

maximum performance. Below are the main features of the X9DRD-7LN4F. (See

Figure 1-1 for a block diagram of the chipset).

Processors

The X9DRD-7LN4F supports single or dual Intel® Xeon E5-2600 Series processors

in LGA 2011 sockets (Socket R). Please refer to the serverboard description pages

on our web site for a complete listing of supported processors (www.supermicro.

com).

Memory

The X9DRD-7LN4F has 16 DIMM slots that can support up to 512 GB of RDIMM,

ECC LRDIMM or ECC/non-ECC UDIMM DDR3-1600/1333/1066/800 type memory.

See Chapter 5 for details.

SAS

A total of eight SAS 2.0 ports are provided with an LSI 2308 SAS controller. RAID

levels 0, 1, and 10 are supported.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SAS drives.

Serial ATA

A SATA controller is also integrated into the chipset to provide two SATA 3.0 (6/

Gbps) and four SATA 2.0 (3 Gbps) ports, which are RAID 0, 1, 5 and 10 supported.

The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

PCI Expansion Slots

The X9DRD-7LN4F has six PCI-E 3.0 x8 slots. One PCI slot may be used with the

riser card provided with the system. PCI slots are controlled by CPUs: both CPUs

must be installed to utilize all slots. See Chapter 5 for details.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 5019D-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-M4 Bedienungsanleitung

Supermicro

Supermicro Superserver Bedienungsanleitung

Supermicro

Supermicro 34140315 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-FRN2T Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

Supermicro

Supermicro AS-2113S-WN24RT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5028TK-HTTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121C-TN10R Bedienungsanleitung

Supermicro

Supermicro 8042-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-CDNRT+ Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6029P-E1CR12H Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8045C-3R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-M2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1028GR-TR Bedienungsanleitung

Supermicro

Supermicro SBI-7427R-SH Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-16C-IP Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GP-DNR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung