Supermicro Supero 5015B-MR Bedienungsanleitung

SUPER

USER’S MANUAL

Revision 1.0b

SUPERSERVER

5015B-MR

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harm-

ful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0b

Release Date: January 16, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 5015B-MR. Instal-

lation and maintainance should be performed by experienced technicians only.

The SuperServer 5015B-MR is a high-end single processor 1U rackmount server

based on the SC512-200 server chassis and the X7SBi motherboard. The X7SBi

supports single Intel®Xeon®3000 Series/3200 Series Processor at system bus

speeds of 1333/1066/800 MHz.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7SBi motherboard

and the SC512-200 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5015B-MR

into a rack and check out the server conﬁguration prior to powering up the system. If

your server was ordered without the processor and memory components, this chap-

ter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

iii

Preface

SUPERSERVER 5015B-MR User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5015B-MR.

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X7SBi motherboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC512-200 1U rackmount server

chassis. You should follow the procedures given in this chapter when installing, re-

moving or reconﬁguring Serial ATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 5015B-MR User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processor........................................................................................................1-2

Memory ...........................................................................................................1-2

Onboard SATA.................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

1-3 Server Chassis Features ................................................................................1-4

System Power.................................................................................................1-4

Serial ATA Subsystem..................................................................................... 1-4

Control Panel .................................................................................................. 1-4

Rear I/O Panel................................................................................................ 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions..............................................................................2-2

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Basic Installation Procedure ...........................................................................2-4

Installing with Rackmount Kit.......................................................................... 2-4

Installing the Chassis Rails............................................................................. 2-5

Installing the Rack Rails .................................................................................2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack...........................................................2-7

vii

Table of Contents

2-6 Checking the Motherboard Setup...................................................................2-8

2-7 Checking the Drive Bay Setup...................................................................... 2-10

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Overheat.......................................................................................................... 3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-2

HDD................................................................................................................. 3-2

Power..............................................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal...........................................................................................4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

viii

SUPERSERVER 5015B-MR User's Manual

5-5 Installing the Processors and Heatsinks.........................................................5-5

5-6 Installing Memory............................................................................................5-9

Memory Support..............................................................................................5-9

5-7 Adding PCI Add-On Cards............................................................................ 5-10

5-8 Serverboard Details .......................................................................................5-11

X7SBi Quick Reference................................................................................5-12

5-9 Connector Deﬁnitions ...................................................................................5-13

5-10 Jumper Settings............................................................................................ 5-18

5-11 Onboard Indicators........................................................................................5-20

5-12 Floppy, SATA, IPMI, IDE and Printer Ports................................................... 5-21

5-13 Installing Software......................................................................................... 5-23

SuperDoctor III..............................................................................................5-24

5-14 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Accessing the Drive Bays............................................................................... 6-4

6-5 Power Supply..................................................................................................6-6

Power Supply Failure...................................................................................... 6-6

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup............................................................................................ 7-2

7-4 Advanced Setup..............................................................................................7-7

7-5 Security Settings........................................................................................... 7-23

7-6 Boot Settings................................................................................................. 7-25

7-7 Exit................................................................................................................ 7-26

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The Supermicro SuperServer 5015B-MR is a high-end single processor, 1U rack-

mount server with state-of-the-art features. The 5015B-MR is comprised of two

main subsystems: the SC512-200 1U chassis and the X7SBi motherboard. Please

refer to our web site for information on operating systems that have been certiﬁed

for use with the 5015B-MR.

In addition to the mainboard and chassis, various hardware components may have

been included with the 5015B-MR, as listed below.

 One CPU heatsink (SNK-P0016P)

 One (1) 10-cm blower fan (FAN-0059)

 One (1) air shroud (MCP-310-00035-01)

 One (1) SATA cable (CBL-0061L)

 One (1) riser card for PCI-Express x8 add-on card (CSE-RR1U-ELi)

 One (1) riser card for PCI-X add-on card (CSE-RR1U-Xi)

 SuperServer 5015B-MR User's Manual

Optional

 Rackmount hardware with screws (CSE-PT8)

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5015B-MR User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 5015B-MR lies the X7SBi, a single processor

motherboard based upon Intel's E3210 chipset. Below are the main features of

the X7SBi.

Processor

The X7SBi supports single Intel Xeon 3200/3000 Series LGA775 processors at

system bus speeds of 1333, 1066 and 800 MHz. Please refer to the motherboard

speciﬁcations pages on our web site for updates on supported processors.

Memory

The X7SBi has four 240-pin DIMM slots that can support up to 8 GB of unbuffered

ECC DDR2-800/667 SDRAM.

Onboard SATA

A SATA controller is built in to the ICH9R portion of the chipset to provide support

for a six port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 sup-

ported. The SATA drives are hot-swappable units. Note: The operating system

you use must have RAID support to enable the hot-swap capability and RAID

function of the SATA drives.

PCI Expansion Slots

The X7SBi has one universal PCI-Express x8 slot, one 64-bit 133 MHz PCI-X slot

and one PCI 33 MHz slot.

Onboard Controllers/Ports

An onboard IDE controller supports one ﬂoppy drive and up to two Ultra ATA 100

hard drives or ATAPI devices. Onboard I/O backpanel ports include one COM port,

a VGA port, two USB ports, PS/2 mouse and keyboard ports and two Gigabit LAN

(NIC) ports.

Other Features

Other onboard features that promote system health include voltage monitors, a

chassis intrusion header, auto-switching voltage regulators, chassis and CPU

overheat sensors, virus protection and BIOS rescue.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 1019S-MC0T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015TW-INF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GT-HNTF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-T Bedienungsanleitung

Supermicro

Supermicro 7044H-32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-4C-FN8TP Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015CS-TNR Bedienungsanleitung

Supermicro

Supermicro A+ Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029P-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1017R-WR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SBI-7228R-T2F Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018D-MHR7N4P Bedienungsanleitung

Supermicro

Supermicro SuperServe 1019D-FHN13TP Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-F418-B6N4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-520P-WTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018R-TDTP Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R24L Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-DE1CR90 Bedienungsanleitung

Supermicro

Supermicro FatTwin F610P2-RTN Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-3015A-I Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung