Supermicro SUPERSERVER 8016B-TLF Bedienungsanleitung

SUPER

SUPERSERVER

8016B-TLF

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: July 26, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 8016B-TLF. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 8016B-TLF is a high-end quad processor server based on the

SC818A-1400B1UrackmountserverchassisandtheSuperX8QBE-LFserverboard.

The X8QBE-LF supports four Intel® E7-4800/7500 Series processors - please refer

to our web site for an up-to-date list of supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X8QBE-LF serverboard

and the SC818A-1400B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 8016B-TLF

into a rack and check out the server conﬁguration prior to powering up the system. If

your server was ordered without the processor and memory components, this chap-

ter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8016B-TLF.

iii

Preface

SUPERSERVER 8016B-TLF User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8QBE-LF serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC818A-1400B 1U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring Serial ATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

SUPERSERVER 8016B-TLF User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SATA .............................................................................................................. 1-2

Rear I/O Ports.................................................................................................1-2

ATI Graphics Controller...................................................................................1-2

IPMI.................................................................................................................1-2

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-4

System Power................................................................................................. 1-4

SATA Subsystem............................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview............................................................................................................. 2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rails .................................................................................2-4

Installing the Outer Rails.................................................................................2-5

Locking Tabs .............................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

2-5 Checking the Serverboard Setup.................................................................... 2-7

vii

Table of Contents

2-6 Preparing to Power On................................................................................... 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-2

HDD................................................................................................................. 3-2

Power..............................................................................................................3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports..........................................................................................................5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

Memory Support..............................................................................................5-8

Notes and Restrictions..............................................................................5-11

5-7 Adding PCI-E Add-On Cards .........................................................................5-11

5-8 Serverboard Details ...................................................................................... 5-12

X8QBE-LF Quick Reference.........................................................................5-13

5-9 Connector Deﬁnitions ...................................................................................5-14

5-10 Jumper Settings............................................................................................ 5-20

5-11 Onboard Indicators........................................................................................5-23

5-12 SATA Ports....................................................................................................5-24

viii

SUPERSERVER 8016B-TLF User's Manual

5-13 Installing Software......................................................................................... 5-25

Supero Doctor III........................................................................................... 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans.................................................................................. 6-3

Removing a Fan......................................................................................... 6-3

Installing a Fan...........................................................................................6-3

6-4 Drive Bay Installation...................................................................................... 6-4

Removing the Front Bezel..............................................................................6-4

Accessing the Drive Bays............................................................................... 6-5

SATA Drive Installation.................................................................................... 6-6

Mounting a Drive in a Drive Carrier...........................................................6-6

Installing/removing SATA Drives ................................................................ 6-7

SATA Backplane......................................................................................... 6-7

DVD-ROM and Floppy Drive Installation........................................................6-8

6-5 Power Supply..................................................................................................6-9

Power Supply Failure...................................................................................... 6-9

Removing the Power Supply...........................................................................6-9

Installing a new Power Supply........................................................................ 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Boot Conﬁguration ........................................................................................ 7-29

7-5 Security Settings........................................................................................... 7-29

7-6 Exit Options...................................................................................................7-31

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The 8016B-TLF is a high-end server that is comprised of two main subsystems:

the SC818A-1400B 1U server chassis and the X8QBE-LF quad Intel processor

serverboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the SuperServer 8016B-TLF (www.supermicro.

com).

In addition to the serverboard and chassis, various hardware components have

been included with the SuperServer 8016B-TLF, as listed below:

Seven 4-cm hot-swap chassis fans (FAN-0101L4)

•

One air shroud (MCP-310-81804-0B)•

Four CPU passive heatsinks for 1U chassis (SNK-P0044P)•

One riser card for PCI-Express x16 slot (CSE-RR1U-E16)•

SATA Accessories•

One SATA backplane (BPN-SAS-818A)

Three hot-swap drive carriers (CSE-PT39-B0)

One 50-cm iPass to SATA cable (CBL-0116L)

One HDD backplane PWS cable (CBL-0385L)

One rail set (MCP-290-00016-0N)

•

One 8016B-TLF User's Manual•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 8016B-TLF User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 8016B-TLF lies the X8QBE-LF, a quad processor

serverboard based on the Intel 7500/ICH10R chipset. Below are the main features

of the X8QBE-LF. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X8QBE-LF supports four Intel E7-4800/7500 Series processors in LGA1567

sockets. Please refer to the serverboard description pages on our web site for a

complete listing of supported processors (www.supermicro.com).

Memory

The X8QBE-LF has 32 DIMM slots that can support up to 1 TB of registered ECC

DDR3-1066/978/800 SDRAM. Modules of the same size and speed should be used.

See Chapter 5 details.

SATA

ASATAcontroller is integrated into the South Bridge (ICH10R) section of the chipset

to provide a six-port SATA subsystem, which is RAID 0, 1, 10 and (Windows only)

5 supported. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

Rear I/O Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, a dedicated

IPMI LAN port and two Gb Ethernet ports. Two USB ports are also located here.

ATI Graphics Controller

The X8QBE-LF features an integrated Matrox G200eW video controller. The

G200eW is a 2D/3D/video accelerator chip with a 128-bit core.

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-

ﬁcation that provides remote access, monitoring and administration for Supermicro

server platforms. IPMI allows server administrators to view a server’s hardware

status remotely, receive an alarm automatically if a failure occurs, and power cycle

a system that is non-responsive.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro AS-4124GS-TNR Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-116EL1 Bedienungsanleitung

Supermicro

Supermicro SC847 CHASSIS SERIES Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-i2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6035B-8 Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6029P-E1CR12H Bedienungsanleitung

Supermicro

Supermicro SC504-203B Bedienungsanleitung

Supermicro

Supermicro AS-1013S-MTR Bedienungsanleitung

Supermicro

Supermicro SuperBlade IBS-001 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 510T-ML Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-TN24R4T Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029P-TR Bedienungsanleitung

Supermicro

Supermicro 2028UT-BC1NRT Bedienungsanleitung

Supermicro

Supermicro AS-1114CS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-WT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6027TR-DTRF+ Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-TDW Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-6029U-E Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-82 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN10RT Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2025HS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GP-TNAR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung