Supermicro 2027R-E1R24L Bedienungsanleitung

SUPER STORAGE SYSTEM

2027R-E1R24L

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: October 25, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the 2027R-E1R24L. Installation

and maintenance should be performed by experienced technicians only.

The 2027R-E1R24L is a high-end storage system based on the SC216E16-

R920LPB 2U rackmountable chassis and the X9DRD-7LN4F-JBOD dual processor

serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

system and describes the main features of the X9DRD-7LN4F-JBOD serverboard

and the SC216E16-R920LPB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the 2027R-E1R24L into a rack

and check out the server conﬁguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

2027R-E1R24L.

SUPERSTORAGESYSTEM 2027R-E1R24L User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRD-7LN4F-JBOD serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC216E16-R920LPB chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring SAS/SATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................. 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System ............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Rack Mounting Instructions............................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Locking Tabs ................................................................................................... 2-5

Releasing the Inner Rail ................................................................................. 2-5

Installing The Inner Rails on the Chassis....................................................... 2-6

Installing the Outer Rails on the Rack............................................................ 2-7

Standard Chassis Installation ......................................................................... 2-8

Optional Quick Installation Method ................................................................. 2-9

SUPERSTORAGESYSTEM 2027R-E1R24L User's Manual

vii

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-1

Power Fail ....................................................................................................... 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal ........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA2011 Processor.................................................................... 5-4

Table of Contents

viii

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink................................................................................... 5-8

5-5 Installing Memory ............................................................................................ 5-9

Memory Support.............................................................................................. 5-9

DIMM Installation ............................................................................................ 5-9

5-6 Adding PCI Add-On Cards............................................................................ 5-14

5-7 Serverboard Details ...................................................................................... 5-15

X9DRD-7LN4F-JBOD Quick Reference ....................................................... 5-16

5-8 Connector Deﬁnitions ................................................................................... 5-18

5-9 Jumper Settings ............................................................................................ 5-25

5-10 Onboard Indicators........................................................................................ 5-27

5-11 SATA Ports .................................................................................................... 5-28

5-12 Installing Software......................................................................................... 5-29

SuperDoctor III.............................................................................................. 5-30

5-13 Onboard Battery............................................................................................ 5-32

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

5-9 System Fans ................................................................................................... 6-4

6-4 System Cooling ............................................................................................... 6-4

System Fans ................................................................................................... 6-4

System Fan Failure......................................................................................... 6-4

Replacing System Fans .................................................................................. 6-4

Air Shrouds ..................................................................................................... 6-5

Installing the Air Shrouds in the Chassis........................................................ 6-5

6-5 Drive Bay Installation/Removal ....................................................................... 6-7

Accessing the Drive Bays ............................................................................... 6-7

6-5 Power Supply ............................................................................................... 6-10

6-6 Attaching a JBOD Expansion Chassis.......................................................... 6-12

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conﬁguration Data ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations...................................................................... 7-4

SUPERSTORAGESYSTEM 2027R-E1R24L User's Manual

7-4 Event Logs .................................................................................................... 7-25

7-5 IPMI............................................................................................................... 7-27

7-6 Boot............................................................................................................... 7-29

7-7 Security......................................................................................................... 7-30

7-8 Save & Exit ................................................................................................... 7-31

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Table of Contents

Chapter 1

Introduction

1-1 Overview

The 2027R-E1R24L is a high-end storage system comprised of two main subsys-

tems: the SC216E16-R920LPB 2U/rack mount chassis and the X9DRD-7LN4F-

JBOD dual processor serverboard. Please refer to our web site for information

on operating systems that have been certiﬁed for use with the system (www.

supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 2027R-E1R24L, as listed below:

• Two passive CPU heatsinks (SNK-P0048P)

• Three 8-cm system fans (FAN-0126L4)

• Two air shrouds (MCP-310-29011-1N, MCP-310-29012-1N)

• SATA Accessories

One SATA backplane (BPN-SAS2-216EL1)

Twenty-four drive carriers (MCP-220-00047-0B)

• Dual JBOD expansion ports (CBL-0168L-LP)

• One rackmount kit (MCP-290-00053-0N)

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm.

Chapter 1: Introduction

1-1

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6021i Bedienungsanleitung

Supermicro

Supermicro 1028-WTNR(T) Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029BZ-HNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 610U-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025TC-10G Bedienungsanleitung

Supermicro

Supermicro SuperServer 621H-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039C-I Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220U-TNR Bedienungsanleitung

Supermicro

Supermicro X13SAE Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1115SV-WTNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021F Bedienungsanleitung

Supermicro

Supermicro H12SSFR-AN6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013P-8 Plus Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-6029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1RT Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TR Bedienungsanleitung

Supermicro

Supermicro 8028B-TR4F Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung