Supermicro 6027AX-TRF-HFT2 Bedienungsanleitung

SUPERSERVER

6027AX-TRF-HFT1

6027AX-TRF-HFT2

6027AX-TRF-HFT3

6027AX-72RF-HFT1

6027AX-72RF-HFT2

6027AX-72RF-HFT3

SUPER ®

USER’S MANUAL

1.0b

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0b

Release Date: April 16, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6027AX-72RF/

TRF-HFT1/HFT2/HFT3. Installation and maintenance should be performed by

experienced technicians only.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the serv-

er system and describes the main features of the X9DAX-7F/iF-HFT serverboard

and the SC829BTQ-R1K28LPB chassis, which comprise the SuperServer 6027AX-

72RF/TRF-HFT1/HFT2/HFT3.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer into a rack and

check out the server conﬁguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6027AX-72RF/TRF-HFT1/HFT2//HFT3.

SUPERSERVER 6027AX-72RF/TRF-HFT1/HFT2 User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DAX-7F/iF-HFT serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC829BTQ-R1K28LPB server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring SAS or peripheral drives and when replacing system

power supply modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

SUPERSERVER 6027AX-72RF/TRF-HFT1/HFT2//HFT3 User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................. 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-3

Rear I/O Ports................................................................................................. 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System ............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Separating the Sections of the Rack Rails..................................................... 2-4

Installing the Inner Rail Extension .................................................................. 2-4

Outer Rack Rails............................................................................................. 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

vii

Table of Contents

Power button................................................................................................... 3-1

UID Button (Unit Identiﬁed Button) ................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

Informational LED ........................................................................................... 3-2

3-4 OLED Screen .................................................................................................. 3-3

3-5 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal ........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an Xeon E5-2600 Processor ........................................................... 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink................................................................................... 5-7

5-5 Installing Memory ............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

viii

SUPERSERVER 6027AX-72RF/TRF-HFT1/HFT2/HFT3 User's Manual

DIMM Installation ............................................................................................ 5-8

5-6 Adding PCI Add-On Cards............................................................................ 5-12

5-7 Serverboard Details ...................................................................................... 5-13

X9DAX-7F/iF-HFT Quick Reference ............................................................. 5-14

5-8 Connector Deﬁnitions ................................................................................... 5-16

5-9 Jumper Settings ............................................................................................ 5-23

5-10 Onboard Indicators........................................................................................ 5-26

5-11 SATA Ports .................................................................................................... 5-27

5-12 Installing Software......................................................................................... 5-28

SuperDoctor III.............................................................................................. 5-29

5-13 Onboard Battery............................................................................................ 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Accessing the Inside of the System................................................................ 6-3

6-4 System Fans ................................................................................................... 6-4

System Fan Failure......................................................................................... 6-4

Hard Drive Installation..................................................................................... 6-6

6-6 Power Supply .................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conﬁguration Data ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations...................................................................... 7-4

7-4 Overclocking ................................................................................................. 7-24

7-5 Event Logs .................................................................................................... 7-26

7-6 IPMI............................................................................................................... 7-28

7-7 Boot............................................................................................................... 7-31

7-8 Security......................................................................................................... 7-32

7-9 Save & Exit ................................................................................................... 7-33

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 6027AX-72RF/TRF-HFT1/HFT2/HFT3 is a high-end server com-

prised of two main subsystems: the CSE-829BTQ-R1K28LPBP 2U chassis and

the X9DAX-7F/iF-HFT dual processor serverboard. Please refer to our web site for

information on operating systems that have been certiﬁed for use with the system

(www.supermicro.com). For processor speciﬁcs, please see the following page.

In addition to the serverboard and chassis, various hardware components have been

included with the 6027AX-72RF/TRF-HFT1/HFT2/HFT3, as listed below:

• Four 8-cm system fans (FAN-0118L4)

• SAS/SATA accessories

One SAS/SATA backplane (BPN-SAS-829BTQ)

Ten drive carriers (MCP-220-00075-0B)

• One rackmount kit (MCP-290-00053-0N)

• Two passive CPU heatsinks (SNK-P2048P)

• Each model comes with speciﬁc types of CPUs and memories.

Server Model CPU Memory

6027AX-72RF/TRF-HFT1 E5-2687W 8 X 8GB DDR3 (1600MHz)

6027AX-72RF/TRF-HFT2 E5-2643 8 X 4GB DDR3 (1600MHz)

6027AX-72RF/TRF-HFT3 E5-2687WV2 8 X 8GB DDR3 (1866MHz)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user's manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• If you have any questions, please contact our support team at support@su-

permicro.com

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6027AX-72RF/TRF-HFT1/HFT2/HFT3 User's Manual

1-2 Serverboard Features

The SuperServer 6027AX-72RF/TRF-HFT1/HFT2/HFT3 is built around the X9DAX-

7F/iF-HFT, a dual processor serverboard based on the Intel C602 chipset and

designed to provide maximum performance. Below are the main features of the

X9DAX-7F/iF-HFT. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X9DAX-7F/iF-HFT supports dual Intel® Xeon® processors in LGA 2011 sockets

(Socket R).

Server Model Supported Processor

6027AX-72RF/TRF-HFT1 Intel Xeon Processor E5-2687W, Socket R (LGA 2011)

6027AX-72RF/TRF-HFT2 Intel Xeon Processor E5-2643, Socket R (LGA 2011)

6027AX-72RF/TRF-HFT3 Intel Xeon Processor E5-2687WV2, Socket R (LGA 2011)

Please refer to the serverboard description pages on our web site for a complete

listing of supported processors (www.supermicro.com).

Memory

The X9DAX-7F/iF-HFT has 16 DIMM slots that can support up to 512 GB of RDIMM,

ECC LRDIMM or up to 128 GB of Unbuffered (UDIMM) ECC/non-ECC UDIMM

DDR3-1866/1600/1333/1066/800 MHz type memory. See Chapter 5 for details.

SAS

A total of eight SAS 2.0 ports are provided with an LSI 2208 SAS controller. RAID

levels 0, 1, 5, 10, 50 and 60 are supported.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SAS drives.

Serial ATA

A SATA controller is also integrated into the chipset to provide two SATA 3.0 (6/

Gbps) and four SATA 2.0 (3 Gbps) ports, which are RAID 0, 1, 5 and 10 supported.

The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro SBA-7141A-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-FDWTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H8TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GH-TNGR Bedienungsanleitung

Supermicro

Supermicro FatTwin F627G2-FT+ Bedienungsanleitung

Supermicro

Supermicro A+ SERVER 1012C-MRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TR-HTR Bedienungsanleitung

Supermicro

Supermicro A+ Series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-i Bedienungsanleitung

Supermicro

Supermicro SuperServer series Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-TN4 Bedienungsanleitung

Supermicro

Supermicro SYS-F629P3-RTB Betriebsanleitung

Supermicro

Supermicro Storage SuperServer SSG-641E-E1CR36H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5028D-TN4T Bedienungsanleitung

Supermicro

Supermicro SBI-7127R-SH Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015A-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-610U-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN10RT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019P-M Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung