Supermicro SUPERSERVER 1028UX-CR-LL1 Bedienungsanleitung

USER’S MANUAL

1.0a

SUPERSERVER®

1028UX-CR-LL1

1028UX-CR-LL2

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: July 21, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

1028UX-CR-LL1/1028UX-CR-LL2. Installation and maintenance should be

performed by experienced technicians only.

Manual Organization

Chapter 1: Introduction

            

server system and describes the main features of the X10DRU-XLL serverboard

and the SC119UTS-R750 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer



prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1028UX-CR-LL1/1028UX-CR-LL2.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRU-XLL serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when



SUPERSERVER 1028UX-CR-LL1/1028UX-CR-LL2 User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC119UTS-R750 server chassis.

You should follow the procedures given in this chapter when installing, removing



cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ..................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Onboard Serial ATA......................................................................................... 1-2

Input/Output..................................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

PCI Expansion Slots ....................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions .............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Optional Inner Rail Extensions.................................................. 2-5

Assembling the Outer Rails ............................................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Installing and Removing the Chassis From a Rack ....................................... 2-8

Installing the Server into a Telco Rack ........................................................... 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

SUPERSERVER 1028UX-CR-LL1/1028UX-CR-LL2 User's Manual

vii

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing a Passive CPU Heatsink ................................................................. 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-9

5-6 Serverboard Details ...................................................................................... 5-10

X10DRU-X Quick Reference......................................................................... 5-10

 .................................................................................... 5-12

5-8 Jumper Settings ............................................................................................ 5-17

5-9 Onboard Indicators........................................................................................ 5-19

5-10 SATA Ports .................................................................................................... 5-20

5-11 Installing Software......................................................................................... 5-21

Table of Contents

viii

SuperDoctor® 5 ............................................................................................ 5-22

5-12 Onboard Battery............................................................................................ 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Removing Power from the System ................................................................. 6-2

6-3 Control Panel .................................................................................................. 6-2

6-4 Chassis Cover................................................................................................. 6-3

6-5 Installing Drives............................................................................................... 6-4

6-6 Installing Expansion Cards ............................................................................ 6-5

Internal Expansion Card ................................................................................. 6-7

6-7 System Cooling............................................................................................... 6-8

System Fan Replacement............................................................................... 6-8

Installing the Air Shroud................................................................................ 6-10

6-8 Power Supply.................................................................................................6-11

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

 ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

 ...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-32

7-5 IPMI............................................................................................................... 7-34

7-6 Security Settings ........................................................................................... 7-36

7-7 Boot Settings................................................................................................. 7-37

7-8 Save & Exit ................................................................................................... 7-39

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSERVER 1028UX-CR-LL1/1028UX-CR-LL2 User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 1028UX-CR-LL1/1028UX-CR-LL2 is a high-end server

comprised of two main subsystems: the SC119UTS-R750 1U server chassis and

the X10DRU-XLL dual processor serverboard. Please refer to our website for



(www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included:

• Eight sets of 4-cm counter-rotating fans (FAN-0101L4)

• Two passive CPU heatsinks (SNK-P0057PU)

• Two air shrouds, one for each CPU (MCP-310-11901-0B)

• Add-on/Riser Cards

One AOC-UR-I4G Ultra riser card

One RSC-R1UW-2E16 riser card

One RSC-R1UW-E8R riser card

• SAS Accessories

One SAS backplane (BPN-SAS3-116A-N2)

Ten drive carriers (MCP-220-00047-0B)

• One rail kit consisting of one set each of outer rails (MCP-290-00102-0N),

inner rails (MCP-290-00120-0N) and inner rail extensions (MCP-290-00112-

0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://www.supermicro.com/about/policies/safety_

information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1028UX-CR-LL1/1028UX-CR-LL2 User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 1028UX-CR-LL1/1028UX-CR-LL2 lies the

X10DRU-XLL, a dual processor serverboard based on the Intel® PCH C612 Express

chipset. Below are the main features of the serverboard. (See Figure 1-1 for a block

diagram of the chipset.)

Processors

The server supports dual Intel processors in R3 LGA 2011 sockets. The 1028UX-

CR-LL1 includes two Xeon E5-2643 v3 processors and the 1028UX-CR-LL2

includes two Xeon E5-2687 v3 processors.

Memory

The 1028UX-CR-LL1/1028UX-CR-LL2 features 16 DIMM slots. The system comes

with eight 8 GB preinstalled memory modules for a total of 64 GB DDR4-2133 MHz



SAS

An onboard LSI 3108 controller on the X10DRU-XLL provides support for SAS 3.0

drives. These drives are RAID 0, 1, 5, 6 and 10 supported.

SATA

Ten SATA 3.0 ports supported by the Intel PCH are included on the serverboard.

RAID 0, 1, 5 and 10 is supported. Refer to the following ftp site for setup guidelines:

<ftp://ftp.supermicro.com/driver/SAS/LSI/LSI_SAS_EmbMRAID_SWUG.pdf>.

Input/Output

The rear I/O includes a VGA port, a COM port, two USB 3.0 ports, quad Gb LAN

ports and one dedicated IPMI LAN port.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 5018D-MHR7N4P Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1018R-WR Bedienungsanleitung

Supermicro

Supermicro A+ AS-2014TP-HTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015C-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221GE-NR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-9W-H Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

Supermicro

Supermicro SuperServer 621H-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NEL32R Bedienungsanleitung

Supermicro

Supermicro 2029P-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-MHN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5013C-M8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MR-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TRT Bedienungsanleitung

Supermicro

Supermicro SBA-7141A-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-WTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211TP-HPTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-530MT-H12TRF Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1018R-WC0R Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer SSG-6119P-ACR12N4L Bedienungsanleitung

Supermicro

Supermicro AS-1124US-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung