Supermicro SUPERSERVER 6016XT-TF Bedienungsanleitung

SUPER

SUPERSERVER 6016XT-TF

SUPERSERVER 6016GT-TF

SUPERSERVER 6016GT-TF-TM2

SUPERSERVER 6016GT-TF-TC2

USER’S MANUAL

Revision 1.0c

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0c

Release Date: December 18, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 6016XT-

TF/6016GT-TF/6016GT-TF-TM2/6016GT-TF-TC2. Installation and maintenance

should be performed by experienced technicians only.

The SuperServer 6016XT-TF/6016GT-TF/6016GT-TF-TM2/6016GT-TF-TC2 is

based on the SC818GTQ-1400B 1U rackmount server chassis and the Super

X8DTG-DF serverboard. Please refer to our web site for an up-to-date list of sup-

ported operating systems, processors and memory.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X8DTG-DF serverboard

and the SC818GTQ-1400B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the system into a rack and

check out the server conﬁguration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

system.

iii

Preface

SUPERSERVER 6016XT-TF/6016GT-TF/TF-TM2/TF-TC2 User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTG-DF serverboard, including

the locations and functions of connectors, headers and jumpers. Refer to this chap-

ter when adding or removing processors or main memory and when reconﬁguring

the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC818GTQ-1400B 1U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring Serial ATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Eror Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

IPMI.................................................................................................................1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

SATA Subsystem.............................................................................................1-3

Front Control Panel.........................................................................................1-3

Cooling System............................................................................................... 1-3

1-4 GPU Subsystem..............................................................................................1-4

1-5 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rail Extensions ................................................................2-5

Assembling the Outer Rails............................................................................2-6

Installing the Outer Rails onto the Rack.........................................................2-7

SUPERSERVER 6016XT-TF/6016GT-TF/TF-TM2/TF-TC2 User's Manual

vii

Table of Contents

Installing the Server into a Telco Rack........................................................... 2-9

2-5 Checking the Serverboard Setup.................................................................. 2-10

2-6 Checking the Drive Bay Setup.......................................................................2-11

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Universal Information LED..............................................................................3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-3

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 SATA Drive Carrier LEDs................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard...............................................................................5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables.................................................................................5-3

Connecting Power Cables .............................................................................. 5-3

viii

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

Installing an LGA1366 Processor ...................................................................5-5

Installing a CPU Heatsink...............................................................................5-7

Memory Support..............................................................................................5-8

5-6 Adding PCI Add-On Cards............................................................................ 5-10

5-7 Serverboard Details .......................................................................................5-11

X8DTG-DF Quick Reference ........................................................................5-12

5-8 Connector Deﬁnitions ...................................................................................5-13

5-9 Jumper Settings............................................................................................ 5-19

5-10 Onboard Indicators........................................................................................5-21

5-11 SATA Ports....................................................................................................5-22

5-12 Installing Software.........................................................................................5-23

Supero Doctor III...........................................................................................5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Cooling............................................................................................... 6-2

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Accessing the Drive Bays...............................................................................6-4

Peripheral Drive Installation............................................................................6-7

6-5 Installing the Air Shroud..................................................................................6-8

Checking the Air Flow.....................................................................................6-8

6-6 Power Supply.................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-25

7-5 Boot Conﬁguration ........................................................................................ 7-26

7-6 Exit Options...................................................................................................7-27

Appendix A BIOS Error Beep Codes

Appendix B Installing Windows

Appendix C System Speciﬁcations

SUPERSERVER 6016XT-TF/6016GT-TF/TF-TM2/TF-TC2 User's Manual

Chapter 1

Introduction

1-1 Overview

The 6016XT-TF/6016GT-TF/6016GT-TF-TM2/6016GT-TF-TC2 is a GPU-optimized

supercomputing server comprised of the SC818GTQ-1400B chassis and the

X8DTG-DF serverboard. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

• Six 4-cm, hot-swap counter-rotating fans (FAN-0102L4)

• Two 4-cm, hot-swap counter-rotating fans (FAN-0087L4)

• One air shroud (MCP-310-81802-0B)

• Two passive CPU heatsinks (SNK-P0037P)

• Riser Cards, 6016XT-TF:

One RSC-R1UG-2E8 for two PCI-Express x8 cards, left side

One RSC-R1UG-2E8R for two PCI-Express x8 cards, right side

One RSC-R1U-E16R for PCI-Express x16 card, right side

• Riser Cards, 6016GT Series:

One RSC-R1UG-E16 for PCI-Express x16 card, left side

One RSC-R1UG-E16R for PCI-Express x16 card, right side

One RSC-R1U-E16R for PCI-Express x16 card, right side

• Two power cables for GPU cards, 6016GT series only (CBL-0333L)

• SATA Accessories

One SATA backplane (BPN-SAS-818TQ)

Three 35-cm SATA cables (CBL-0315L)

Three hot-swap drive carriers (MCP-220-00001-01)

One SGPIO cable (CBL-0157L)

• One rail set (MCP-290-00020-N)

• One Super Server 6016XT-TF/6016GT Series User's Manual

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6016XT-TF/6016GT-TF/TF-TM2/TF-TC2 User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6016XT-TF/6016GT-TF/6016GT-TF-TM2/6016GT-

TF-TC2 lies the X8DTG-DF, a dual processor serverboard based on the Intel 5520

chipset. Below are the main features of the X8DTG-DF. (See Figure 1-1 for a block

diagram of the chipset).

Processors

The X8DTG-DF supports two Intel Xeon processor 5600/5500 series. Please refer

to the serverboard description pages on our web site for a complete listing of sup-

ported processors (www.supermicro.com).

Memory

The X8DTG-DF has 12 DIMM slots that can support up to 192 GB of registered

ECC DDR3-1333/1066/800 SDRAM or up to 48 GB of unbuffered ECC/non-ECC

DDR3-1333/1066/800 MHz SDRAM. Modules of the same size and speed are

recommended. See Chapter 5 for details.

Serial ATA

ASATAcontroller is integrated into the South Bridge (ICHR10) section of the chipset

to provide a six-port 3/Gbs SATA subsystem, which is RAID 0, 1, 5 and 10 sup-

ported. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

PCI Expansion Slots

The X8DTG-DF has two PCI-Express 2.0 x16 slots and one PCI-Express 2.0 x4

slot. The 6016GT-TF-TM2 and 6016GT-TF-TC2 (and the 6016GT-TF if GPUs are

installed) can accommodate one low-proﬁle PCI-E x4 card with a riser card in a

x16 slot. The 6016XT-TF without GPUs installed can support four full size PCI-E

x8 cards in the x16 slots and (with a riser card) one low-proﬁle PCI-E x4 card in

a x16 slot.

Onboard Controllers/Ports

The color-coded I/O ports include one COM port (an additional COM header is

located on the serverboard), a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse

and keyboard ports and two Gb Ethernet ports.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro AS-1010P-8R Bedienungsanleitung

Supermicro

Supermicro AS-2113S-WN24RT Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-116EL1 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8048B-TR3 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6011H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014L-M4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6048R-TXR Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNMR2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-MT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro 7044H-82 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-T2 Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-8Q Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-540P-E1CTR36L Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 5013G-6 Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-F418-B6N4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E100-13AD-H Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6219M-2N Bedienungsanleitung

Supermicro

Supermicro X13SAE Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110C-FHN4T Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-311A-1C2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521AD-TN2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2026T-DE2R24L Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung