Supermicro 6028R-WTR Bedienungsanleitung

SUPERSERVER

6028R-WTR

6028R-WTRT

SUPER

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: August 14, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6028R-WTR(T).

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 6028R-WTR(T) is a high-end server based on the

SC815TS-R740WBP 2U rackmountable chassis and the X10DRW-i(T) dual

processor serverboard. The SuperServer 6028R-WTR(T) system's WIO platform

has major advantages over E-ATX/ATX platforms in small form factor 1U and 2U

systems by increasing I/O performance by use of multiple full-height, full-length

add-on cards. Please refer to our web site for updates on supported processors.

The only difference between the 6028R-WTR and 6028R-WTRT servers is that

the 6028R-WTR use 1Gps dual LAN ports and the 6028R-WTRT uses 10Gps dual

LAN ports.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRW-i(T) serverboard

and the SC815TS-R740WBP chassis.

Chapter 2: Server Installation

Thischapterdescribesthe stepsnecessarytoinstalltheSuperServer6028R-WTR(T)

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6028R-WTR(T).

SUPERSERVER 6028R-WTR(T) USER'S MANUAL

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRW-i(T) serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TS-R740WBP server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring SAS/SATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SAS/SATA........................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

Rear I/O Ports.................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem.................................................................................... 1-3

Front Control Panel.........................................................................................1-3

Cooling System............................................................................................... 1-3

1-6 Advanced Power Management.......................................................................1-4

Intel® Intelligent Power Node Manager (IPNM) .............................................1-4

Manageability Engine (ME)............................................................................. 1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Separating the Sections of the Rack Rails.....................................................2-4

Installing the Inner Rail Extension..................................................................2-4

Outer Rack Rails.............................................................................................2-5

SUPERSERVER 6028R-WTR(T) USER'S MANUAL

vii

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power.............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................3-2

Power Fail.......................................................................................................3-2

Information LED.............................................................................................. 3-2

NIC1................................................................................................................ 3-2

NIC2................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power.............................................................................................................. 3-3

3-4 Drive Carrier LEDs..........................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies ..........................................................................4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ......................................................................4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Connecting Cables..........................................................................................5-2

Connecting Data Cables................................................................................. 5-2

Connecting Power Cables ..............................................................................5-2

Connecting the Control Panel......................................................................... 5-3

5-3 Rear I/O Ports.................................................................................................5-4

Table of Contents

viii

SUPERSERVER 6028R-WTR(T) USER'S MANUAL

5-4 Installing the Processor and Heatsink ............................................................5-5

Installing an LGA 2011 Processor...................................................................5-5

Installing a Passive CPU Heatsink .................................................................5-8

Removing the Heatsink................................................................................... 5-9

5-5 Installing Memory.......................................................................................... 5-10

Memory Support............................................................................................5-10

DIMM Installation .......................................................................................... 5-10

5-6 Adding PCI Add-On Cards............................................................................5-13

5-7 Serverboard Details ...................................................................................... 5-14

5-8 Connector Deﬁnitions ...................................................................................5-17

5-9 Jumper Settings............................................................................................ 5-23

Explanation of Jumpers ................................................................................5-23

5-10 Onboard LED Indicators ...............................................................................5-26

5-11 SATA Connections......................................................................................... 5-27

5-12 Installing Software.........................................................................................5-28

SuperDoctor 5............................................................................................... 5-29

5-13 Serverboard Battery...................................................................................... 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-2

System Fan Failure......................................................................................... 6-2

Replacing System Fans.................................................................................. 6-3

6-4 Drive Bay Installation/Removal.......................................................................6-4

Accessing the Drive Bays............................................................................... 6-4

SAS/SATA Drive Installation............................................................................6-4

Hard Drive Backplane..................................................................................... 6-5

DVD-ROM Installation (Optional)....................................................................6-6

6-5 Power Supply..................................................................................................6-7

Power Supply Failure...................................................................................... 6-7

Removing/Replacing the Power Supply.......................................................... 6-7

Table of Contents

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-2

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup......................................................................................................7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-3

7-4 Event Logs....................................................................................................7-23

7-5 IPMI...............................................................................................................7-25

7-6 Boot...............................................................................................................7-27

7-7 Security......................................................................................................... 7-28

7-8 Save & Exit................................................................................................... 7-29

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSERVER 6028R-WTR(T) USER'S MANUAL

Notes

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer E50-9AP-L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-i2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro SuperServer 6028U-E1CNR4T+ Bedienungsanleitung

Supermicro

Supermicro X5DPR-iG2 Plus Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-2029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-E1CR90 Bedienungsanleitung

Supermicro

Supermicro SSG-5049P-E1CR45L Betriebsanleitung

Supermicro

Supermicro SuperServer E300-9A-8CN10P Bedienungsanleitung

Supermicro

Supermicro AS-4020A-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510P-M Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211GT-HNTF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220ME-FN6R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MD-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation SYS-740A-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 8028B-TR3F Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2025HS-TNR Bedienungsanleitung

Supermicro

Supermicro 6027TR-H70QRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 610U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019S-M2 Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNMR2 Bedienungsanleitung

Supermicro

Supermicro SBI-7127RG-E Bedienungsanleitung

Supermicro

Supermicro SuperServer 5018D-LN4T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-DNCR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung