Supermicro SBI-7127RG-E Bedienungsanleitung

SBI-7127RG-E

Blade Server Module

User’s Manual

Revison 1.0

SBI-7127RG-E Blade Server Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY

EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revison 1.0

Release Date: October 28, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's SBI-7127RG-E blade server module. Installation

and maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the

SBI-7127RG-E blade server module and describes its main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the SBI-7127RG-E

blade server module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBI-7127RG-E blade server module into

the Superblade chassis. Other sections cover the installation and placement of memory

modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about the SBI-7127RG-E blade

server module. Included here are descriptions and information for mainboard

components, connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for the SBI-7127RG-E blade server module.

Appendix A: BIOS POST Codes

BIOS POST Codes for the SBI-7127RG-E blade server module are explained in this

appendix.

SBI-7127RG-E Blade Server Module User’s Manual

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Blade Module Features....................................................................1-2

Processors..............................................................................................1-2

Memory...................................................................................................1-2

Storage....................................................................................................1-3

Density....................................................................................................1-3

GPU/Xeon Phi Modules..........................................................................1-3

1-4 Contacting Supermicro.....................................................................1-4

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements......................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area.......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning.........................................................................2-14

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing Blade Modules..................................................................3-1

Powering Up a Blade Unit.......................................................................3-1

Powering Down a Blade Unit ..................................................................3-1

Removing a Blade Unit from the Enclosure............................................3-1

Removing/Replacing the Blade Cover....................................................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Processor Installation.......................................................................3-4

SBI-7127RG-E Blade Server Module User’s Manual

Removing a Processor............................................................................3-4

Installing a Processor..............................................................................3-5

3-4 Onboard Battery Installation..........................................................3-10

3-5 Memory Installation.........................................................................3-10

Populating Memory Slots......................................................................3-10

DIMM Installation ..................................................................................3-11

3-6 Hard Drive Installation....................................................................3-12

3-7 Installing GPU Expansion Cards ..................................................3-13

Chapter 4 Blade Module Features..............................................4-1

4-1 Control Panel.....................................................................................4-2

Power Button ..........................................................................................4-3

KVM Button.............................................................................................4-3

LED Indicators ........................................................................................4-3

KVM Connector.......................................................................................4-3

4-2 Mainboard...........................................................................................4-4

Jumpers..................................................................................................4-6

CMOS Clear............................................................................................4-6

USB Port Connector ...............................................................................4-6

4-3 Blade Unit Components...................................................................4-7

Memory Support .....................................................................................4-8

Hard Disk Drives.....................................................................................4-8

Chapter 5 BIOS.......................................................................................5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility..........................................................................5-1

5-2 BIOS Updates....................................................................................5-2

Flashing BIOS.........................................................................................5-2

5-3 Running Setup...................................................................................5-3

5-4 Main BIOS Setup...............................................................................5-4

5-5 Advanced Setup................................................................................5-5

5-6 Event Logs Setup............................................................................5-14

5-7 IPMI Setup........................................................................................5-15

5-8 Boot...................................................................................................5-16

5-9 Security.............................................................................................5-16

5-10 Save & Exit.....................................................................................5-17

vii

Appendix A AMI UEFI BIOS POST Codes..............................A-1

A-1 Checkpoint Ranges..........................................................................A-1

A-2 Standard Checkpoints......................................................................A-2

A-3 OEM-Reserved Checkpoint Ranges .............................................A-9

SBI-7127RG-E Blade Server Module User’s Manual

viii

Notes

1-1

Chapter 1

Introduction

1-1 Overview

The SBI-7127RG-E blade server module is a compact self-contained server that

connects into a pre-cabled enclosure that provides power, cooling, management and

networking functions. One enclosure for the SBI-7127RG-E blade server module can

hold ten blade units.

In this manual, “blade system” refers to the entire system (including the enclosure and

blades units), “blade” or “blade unit” refers to a single blade module and “blade

enclosure” is the chassis that the blades, power supplies and modules are housed in.

Please refer to our web site for information on operating systems that have been

certified for use with the SuperBlade (www.supermicro.com/products/superblade/).

Note: For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information: http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

support@supermicor.com

Note: A complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm.

1-2 Product Checklist of Typical Components

Your blade module ships with its mainboard already installed in its chassis. Memory,

hard disk drives/SATA DOM drives, Graphic Processor Units (GPU) and the Central

Processor Units (CPU) must all be installed by the user after shipment. See Chapter 3:

"Setup and Installation" on page 3-1 for details on installation of these components.

Aside from the blade module unit itself, the following optional Mezzanine add-on cards

(with Infiniband Switch) may be ordered for your blade module:

• AOC-XEH-iN2

• AOC-IBH-XDD

• AOC-IBH-XQD

• AOC-IBH-XQS

• AOC-IBH-XDS

• AOC-IBH-X3QS

• AOC-IBH-X3QD

SBI-7127RG-E Blade Server Module User’s Manual

1-2

See the Supermicro website and the SuperBlade Network Modules User’s Manual for

more details on these add-on cards.

1-3 Blade Module Features

Table 1-1 lists the main features of the SBI-7127RG-E blade server module. See the

proceeding section for components typically included in a blade system and other

optional components. Specific details on the SBI-7127RG-E blade server module is

found in Chapter 4: " Blade Module Features" on page 4-1.

Processors

The SBI-7127RG-E blade server module supports up to dual Intel Xeon E5-2600 V2

series 2011-pin (LGA 2011 Socket R) processors.

Refer to the Supermicro web site for a complete listing of supported processors (http://

www.supermicro.com/products/superblade). Please note that you will need to check the

detailed specifications of a particular blade module for a list of the CPUs it supports.

Details on installation of the processor into the SBI-7127RG-E blade server module are

found in Chapter 3: "Setup and Installation" on page 3-1.

Memory

The SBI-7127RG-E blade server module has eight (8) 240-pin DIMM sockets that can

support up to 256 GB of DDR3 1866/1600/1333/1066 MHz speed SDRAM. Both

interleaved and non-interleaved memory are supported, so you may populate any

number of DIMM slots.

Please refer to the Supermicro web site for a list of supported memory

(www.supermicro.com/products/superblade). The detailed specifications for a blade

module will contain a link to a list of recommended memory sizes and manufacturers.

Table 1-1. SBI-7427RG Blade Specification Features

Mainboard B9DRG-E (proprietary form factor)

Chassis Dimensions (HxWxD): 11.32” x 1.67” x 18.9”

Processors Single or dual Intel™Xeon®E5-2600 V2 series 2011-pin (LGA 2011 Socket

R) processors. Please refer to our web site for a complete listing of

supported processors.

FSB Speed QPI up to 8.0 GT/s bus speed

Chipset Intel C602

Graphics Controller Matrox G200eW graphic controller

BIOS 128 MB SPI Flash EEPROM with AMI® BIOS

Memory Capacity Supports up to 256 GB of RDIMM and 64 GB of UDIMM DDR3 1866/1600/

1333/1066 MHz speed SDRAM in eight (8) 240-pin DIMM sockets

Expansion Slots Two (2) PCI-E 3.0 x16 expansion slots

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro 8015C-T Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 540A-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER E102-9AP-L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-MHN2 Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GP-DNR Bedienungsanleitung

Supermicro

Supermicro 6028R-WTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8048B-TR4F Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-MTNRV Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-MR Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNC8R Montageanleitung

Supermicro

Supermicro SuperServer SYS-110D-4C-FRAN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-32 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6010L Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GP-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 8028B-TR3F Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-T Series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro Altus 1804i Kurzanleitung

Supermicro

Supermicro SUPERSERVER 1028UX-CR-LL1 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-WT8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung