Supermicro SuperServer 5018D-LN4T Bedienungsanleitung

SUPERSERVER®

5018D-LN4T

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: August 19, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5018D-LN4T.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018D-LN4T is a high-end server based on the SC504-203B

rackmountable chassis and the X10SDV-2C-TP4F single processor motherboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10SDV-2C-TP4F mother-

board and the SC504-203B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018D-LN4T

into a rack and check out the server conguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018D-LN4T.

SUPERSERVER 5018D-LN4T User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X10SDV-2C-TP4F motherboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconguring the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC504-203B server chassis.

You should follow the procedures given in this chapter when installing, removing

or reconguring hard drives and when replacing system power supply units and

cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Appendix C: UEFI BIOS Recovery Instructions

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processor ........................................................................................................ 1-2

Memory ........................................................................................................... 1-2

SATA................................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

Graphics Controller ......................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Installing the Chassis into a Standard Rack................................................... 2-4

Telco Rack....................................................................................................... 2-5

Installing the Chassis into a Telco Rack......................................................... 2-5

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

SUPERSERVER 5018D-LN4T User's Manual

vii

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Information LED .............................................................................................. 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 Installing Memory............................................................................................ 5-4

5-5 Adding PCI Expansion Cards ......................................................................... 5-5

5-6 Motherboard Details........................................................................................ 5-6

X10SDV Series Quick Reference ................................................................... 5-7

5-7 Connector Denitions ..................................................................................... 5-9

5-8 Jumper Settings ............................................................................................ 5-16

5-9 Onboard Indicators........................................................................................ 5-19

Table of Contents

viii

SUPERSERVER 5018D-LN4T User's Manual

5-10 SATA/SAS Ports............................................................................................ 5-21

5-11 Installing Drivers............................................................................................ 5-22

SuperDoctor® 5 ............................................................................................ 5-23

5-13 Onboard Battery............................................................................................ 5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 System Fans (Optional) .................................................................................. 6-4

6-5 Installing Hard Drives...................................................................................... 6-5

Hard Drive Conguration Options ................................................................... 6-6

6-6 Installing an Expansion Card .......................................................................... 6-7

6-7 Power Supply.................................................................................................. 6-9

Replacing the Power Supply........................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-28

7-5 IPMI............................................................................................................... 7-30

7-6 Security Settings ........................................................................................... 7-33

7-7 Boot Settings................................................................................................. 7-36

7-8 Save & Exit ................................................................................................... 7-38

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Appendix C UEFI BIOS Recovery Instructions

Chapter 1

Introduction

1-1 Overview

The SuperServer 5018D-LN4T is a mini server comprised of two main subsystems:

the SC504-203B 1U chassis and the X10SDV-2C-TP4F single processor mother-

board. Please refer to our website for information on operating systems that have

been certied for use with the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5018D-LN4T, as listed below:

• One 4-cm fan (FAN-0065L4)

• One riser card (RSC-RR1U-E8)

• One special I/O shield (MCP-260-00100-0B)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

If you have any questions, please contact our support team at:

[email protected]m

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5018D-LN4T User's Manual

1-2 Motherboard Features

The SuperServer 5018D-LN4T is built around the X10SDV-2C-TP4F, a single

processor motherboard designed to provide maximum performance. Below are

the main features of the X10SDV-2C-TP4F. (See Figure 1-1 for a block diagram).

Processor

The X10SDV-2C-TP4F supports a single Intel® Xeon/Pentium® D-1500 Family SoC

embedded processor (SoC = System on a Chip).

Memory

The X10SDV-2C-TP4F has four DIMM slots that can support up to 128 GB of ECC

RDIMM (Registered DIMM) or 64 GB of ECC/non-ECC UDIMM (Unregistered

DIMM) DDR4-1866/1600 memory. See Chapter 5 for details.

SATA

A SATA controller is integrated into the chipset to provide four SATA 3.0 (6/Gbps)

ports.

PCI Expansion Slots

The X10SDV-2C-TP4F has one M.2 PCI-E 3.0 x4 slot, an M Key for 2242/2280/22110

SSDs and one mini PCI-E 2.0 x1 slot with mSATA support (Mux with I-SATA5).

Rear I/O Ports

The rear I/O ports include a VGA port, two USB 3.0 ports, two 10 Gb SFP+ (Small

Form-factor Pluggable) Ethernet LAN ports, two Gb Ethernet (RJ45) LAN ports and

a dedicated IPMI LAN port.

Graphics Controller

The X10SDV-2C-TP4F features an integrated AST 2400 graphics controller.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6014P-32 Bedienungsanleitung

Supermicro

Supermicro SYS-1028UX-LL1-B8 Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-310T-4C2 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-421E-1T3N Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019S-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 510P-M Bedienungsanleitung

Supermicro

Supermicro 5025M-4 Bedienungsanleitung

Supermicro

Supermicro 7043P-8R Bedienungsanleitung

Supermicro

Supermicro SuperStorage Server SSG-6049SP-E1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-621E-1C3N Bedienungsanleitung

Supermicro

Supermicro E100-9AP-IA Bedienungsanleitung

Supermicro

Supermicro SSG-937R-E2CJB Bedienungsanleitung

Supermicro

Supermicro 7044H-T Bedienungsanleitung

Supermicro

Supermicro AS-1115HS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN12RV Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-821GE-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-511R-W Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2014S-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5028TK-HTTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MP-H8TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 4029GP-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-111C-NR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER E102-9AP-L Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-N32R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung