Supermicro A+ SERVER 1012C-MRF Bedienungsanleitung

SUPER ®

A+ SERVER

1012C-MRF

USER'S MANUAL

Revision 1.0c

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0c

Release Date: January 7, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the A+ Server 1012C-MRF.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer A+ Server 1012C-MRF is a 1U rackmount server based on the

SC512F-350B server chassis and the Supermicro H8SCM-F serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Supermicro H8SCM-F

serverboard and the SC512F-350B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the A+ Server 1012C-MRF

into a rack and check out the server conguration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

A+ Server 1012C-MRF.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the H8SCM-F serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

serverboard.

iii

Preface

A+ SERVER 1012C-MRF USER'S MANUAL

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC512F-350B 1U rackmount

server chassis. You should follow the procedures given in this chapter when

installing, removing or reconguring SATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Specications

Preface

Notes

A+ SERVER 1012C-MRF USER'S MANUAL

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Ethernet Ports ................................................................................................. 1-2

Onboard Controllers/Ports .............................................................................. 1-2

Graphics Controller ......................................................................................... 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

Serial ATA Subsystem..................................................................................... 1-4

Control Panel .................................................................................................. 1-4

Rear I/O Panel ................................................................................................ 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions .............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Basic Installation Procedure ........................................................................... 2-4

Installing with Rackmount Kit.......................................................................... 2-5

vii

Table of Contents

2-6 Checking the Serverboard Setup.................................................................... 2-9

2-7 Checking the Drive Bay Setup.......................................................................2-11

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

Chapter 4Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 I/O Port and Control Panel Connections ........................................................ 5-2

Front Control Panel......................................................................................... 5-2

5-3 Processor and Heatsink Installation................................................................ 5-3

Installing a Passive Heatsink .......................................................................... 5-5

Removing the Heatsink................................................................................... 5-5

5-4 Installing Memory............................................................................................ 5-6

DIMM Module Population Conguration .................................................... 5-7

viii

A+ SERVER 1012C-MRF USER'S MANUAL

5-5 Adding PCI Cards ........................................................................................... 5-8

5-6 Serverboard Details ........................................................................................ 5-9

H8SCM-F Quick Reference .......................................................................... 5-10

5-7 Connector Denitions.................................................................................... 5-12

5-8 Jumper Settings ............................................................................................ 5-19

Explanation of Jumpers ................................................................................ 5-19

5-9 Onboard Indicators........................................................................................ 5-22

5-10 IDE and SATA Drive Connections................................................................. 5-23

5-11 Enabling SATA RAID..................................................................................... 5-25

Serial ATA (SATA).......................................................................................... 5-25

Installing the OS/SATA Driver ....................................................................... 5-25

Building a Driver Diskette......................................................................... 5-25

Enabling SATA RAID in the BIOS................................................................. 5-26

Using the Adaptec RAID Utility ..................................................................... 5-27

Installing the RAID Driver During OS Installation......................................... 5-27

5-12 Installing Software......................................................................................... 5-28

SuperDoctor III.............................................................................................. 5-29

5-13 Serverboard Battery...................................................................................... 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-2

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Accessing the Drive Bays ............................................................................... 6-4

Optional DVD-ROM Drive Installation/Removal.............................................. 6-5

6-5 Power Supply.................................................................................................. 6-7

Power Supply Failure...................................................................................... 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Menu ...................................................................................................... 7-2

7-3 Advanced Settings Menu ................................................................................ 7-2

7-4 Security Menu ............................................................................................... 7-15

7-5 Boot Menu..................................................................................................... 7-16

7-6 Exit Menu ...................................................................................................... 7-17

Table of Contents

Appendix A BIOS Error Beep Codes

Appendix BSystem Specications

Notes

A+ SERVER 1012C-MRF USER'S MANUAL

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SBA-7121M-T1 Handbuch

Supermicro

Supermicro SuperServer 5019A-FN5T Bedienungsanleitung

Supermicro

Supermicro AS -1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12TRF Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-6219M-2N Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E302-12A-4C Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029UZ-TN20R25M Bedienungsanleitung

Supermicro

Supermicro SuperServe 1019D-FHN13TP Bedienungsanleitung

Supermicro

Supermicro AS -5019D-FTN4 Bedienungsanleitung

Supermicro

Supermicro SC116AC2-R706WB Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021F Bedienungsanleitung

Supermicro

Supermicro SUPERO 6027TR-D71RF SUPERSERVER Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D-4CN8TP Bedienungsanleitung

Supermicro

Supermicro H12SSFR-AN6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021H Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-641E-E1CR36H Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro 8048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro AS-2020A-8R Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R40L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-MT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung