Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

SUPER

USER’S MANUAL

1.0b

SuperServer AS-2021A-T2R+F

SuperServer AS-2021A-32R+F

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: April 20, 2010

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer AS-2021A-

T2R+F/AS-2021A-32R+F. Installation and maintainance should be performed by

experienced technicians only.

The SuperServer AS-2021A-T2R+F/32R+F is a high-end server based on the

SC825TQ-R720LPB 2U rackmount chassis and the H8DIi+-F (AS-2021A-T2R+F

server) or H8DI3+-F (AS-2021A-32R+F server) dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with

the server system and describes the main features of the H8DIi+-F/H8DI3+-F

serverboard and the SC825TQ-R720LPB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer AS-

2021A-T2R+F/32R+F into a rack and check out the server conﬁguration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer AS-2021A-T2R+F/32R+F.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the H8DIi+-F/H8DI3+-F serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

SUPERSERVER AS-2021A-T2R+F/32R+F User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC825TQ-R720LPB server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring SAS/SATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

HyperTransport Technology............................................................................ 1-2

Memory ...........................................................................................................1-2

Serial ATA........................................................................................................1-2

SAS (AS-2021A-32R+F Only).........................................................................1-3

PCI Expansion Slots....................................................................................... 1-3

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power.................................................................................................1-4

Serial ATA/SAS Subsystem............................................................................. 1-4

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Warnings and Precautions!........................................................................................ 2-2

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Separating the Sections of the Rack Rails.....................................................2-4

Installing the Inner Rail Extension..................................................................2-4

SUPERSERVER AS-2021A-T2R+F/32R+F User's Manual

vii

Outer Rack Rails............................................................................................. 2-6

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Checking the Drive Bay Setup...................................................................... 2-10

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

Reset...............................................................................................................3-1

Power.............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................3-2

Power Fail.......................................................................................................3-2

Overheat/Fan Fail: .......................................................................................... 3-2

NIC1................................................................................................................ 3-2

NIC2................................................................................................................ 3-2

HDD................................................................................................................. 3-3

Power.............................................................................................................. 3-3

3-4 SAS/SATA Drive Carrier LEDs........................................................................3-3

Notes

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard...............................................................................5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables.................................................................................5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

Installing an Opteron 2000 Processor ............................................................5-5

Installing a Passive Heatsink..........................................................................5-7

Removing the Heatsink................................................................................... 5-8

Removing a Passive Heatsink ...................................................................5-8

5-6 Installing Memory............................................................................................ 5-8

Table of Contents

viii

Memory Support..............................................................................................5-8

Memory Support......................................................................................... 5-9

Populating DIMMs...................................................................................... 5-9

5-7 Installing PCI Add-On Cards..........................................................................5-11

5-8 Serverboard Details ...................................................................................... 5-12

5-8 Connector Deﬁnitions ...................................................................................5-14

5-9 Jumper Settings............................................................................................ 5-19

Explanation of Jumpers ................................................................................ 5-19

5-10 Onboard Indicators........................................................................................5-22

5-11 Floppy, IDE, SAS and SATA Drive Connections........................................... 5-23

5-12 Enabling SATA RAID..................................................................................... 5-25

Serial ATA (SATA)..........................................................................................5-25

Installing the OS/SATA Driver....................................................................... 5-25

Building a Driver Diskette.........................................................................5-25

Enabling SATA RAID in the BIOS............................................................5-26

Using the Adaptec RAID Utility..................................................................... 5-27

Installing the RAID Driver During OS Installation......................................... 5-27

5-13 Installing Drivers............................................................................................ 5-28

Supero Doctor III........................................................................................... 5-29

5-14 Flashing IT Firmware .................................................................................... 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure.........................................................................................6-3

Replacing System Fans..................................................................................6-3

6-4 Drive Bay Installation/Removal.......................................................................6-4

Accessing the Drive Bays...............................................................................6-4

SATA Drive Installation....................................................................................6-6

Hard Drive Backplane.....................................................................................6-7

DVD-ROM and Floppy Drive Installation........................................................6-8

6-5 Power Supply.................................................................................................. 6-9

Power Supply Failure......................................................................................6-9

Removing/Replacing the Power Supply.......................................................... 6-9

Chapter 7 BIOS

SUPERSERVER AS-2021A-T2R+F/32R+F User's Manual

Table of Contents

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data.........................................................7-1

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

4-3 Advanced Settings Menu................................................................................7-4

4-4 Security Menu............................................................................................... 7-21

4-5 Boot Menu..................................................................................................... 7-21

4-6 Exit Menu......................................................................................................7-22

Appendix A BIOS Error Beep Codes

A-1 BIOS Error Beep Codes .................................................................................A-1

Appendix B Installing Windows

B-1 Installing Windows to a RAID System............................................................B-1

B-2 Installing Windows to a Non-RAID System ....................................................B-2

Appendix C System Speciﬁcations

Notes

SUPERSERVER AS-2021A-T2R+F/32R+F User's Manual

Andere Handbücher für SuperServer AS-2021A-T2R+F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028TR-T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029UZ-TN20R25M Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210SE-31D Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6034H-X8R Bedienungsanleitung

Supermicro

Supermicro SuperServer 4029GP-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 7089P-TR4T Bedienungsanleitung

Supermicro

Supermicro SuperServer 620BT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-WC1R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro 6027TR-H70QRF Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer SSG-6119P-ACR12N4L Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2029GP-TR Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1115S-FWTRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MP-H8TNR Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740A-T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621P-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-C1R(T)4+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6016T-URF4+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029UZ-TN20R25M Bedienungsanleitung

Supermicro

Supermicro 8060 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung