Supermicro BPN-SAS3-213A-N8 Bedienungsanleitung

1.0

BPN-SAS3-213A-N8 Backplane

USER'S GUIDE

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harm-

ful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: September 25, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

Contents

Contacting Supermicro..................................................................................................iv

Returning Merchandise for Service................................................................................v

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 A Note to Users............................................................................................... 1-2

1-4 Introduction to the BPN-SAS3-213A-N8 Backplane ....................................... 1-2

Chapter 2 Connectors and Jumpers

2-1 Front Connectors ............................................................................................ 2-1

Front Connectors ............................................................................................ 2-1

2-2 FrontConnectorandPinDenitions............................................................... 2-2

2-3 Front Jumpers ................................................................................................. 2-3

Explanation of Jumpers .................................................................................. 2-3

2-4 Rear Components, Connectors, and LED Indicators ..................................... 2-5

BPN-SAS3-213A-N8 Backplane Manual

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning to

the manufacturer, the RMA number should be prominently displayed on the outside

of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling

charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

Duringthewarrantyperiod,contactyourdistributorrstforanyproductproblems.

BPN-SAS3-213A-N8 Backplane Manual

Notes

1-1

Chapter 1 Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

aregenerallysu󰀩cienttoprotectyourequipmentfromESD.

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing a component from the antistatic

bag.

• Handle the backplane by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

• Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

• Disconnect the power cable before installing or removing any cables from the

backplane.

• Make sure that the backplane is securely and properly installed on the mother-

board to prevent damage to the system due to power shortage.

BPN-SAS3-213A-N8 Backplane Manual

1-2

1-3 A Note to Users

All images and layouts in this user's guide are based upon the latest PCB revision

available at the time of publishing. The card you have received may not look exactly

the same as the graphics in this manual.

1-4 Introduction to the BPN-SAS3-213A-N8 Backplane

The BPN-SAS3-213A-N8 backplane has been designed to utilize the most up-

to-date technology available, providing your system with reliable, high-quality

performance.

Always refer to the Supermicro web site at www.supermicro.com for the latest

updates,compatibleparts,andsupportedcongurations.

2-1

Chapter 2 Connectors and Jumpers

Chapter 2

Connectors and Jumpers

2-1 Front Connectors

Front Connectors

1. Power Connectors (4-pin): JPW3,

JPW2, JPW1, JPW6, JPW5, and

JPW4.

2. Upgrade Connector: JP1

3. SAS IN #0-#3: JSM1

4. SAS IN #4-#7: JSM3

5. SAS IN #8-#11: JSM2

6. SAS IN #12-#15: JSM4

7. NVMe IN #15: CN8

8. NVMe IN #13: CN4

9. NVMe IN #11: CN7

10. NVMe IN #9: CN3

11. NVMe IN #8: CN1

12. NVMe IN #10: CN5

13. NVMe IN #12: CN2

14. NVMe IN #14: CN6

Figure 2-1. Front Connectors

14 1

13 1

BPN-SAS3-213A-N8 Backplane Manual

2-2

2-2 FrontConnectorandPinDenitions

2. Upgrade Connector

The upgrade connector is used for manufac-

turer diagnostic purposes only.

Backplane

Main Power

4-Pin Connector

Pin#Denition

1 +12V

2 and 3 Ground

4 +5V

1. Backplane Main Power Connectors

The 4-pin connectors, designated JPW3,

JPW2, JPW1, JPW6, JPW5, and JPW4, pro-

vide power to the backplane. See the table on

therightforpindenitions.

3. - 6. SAS IN Ports (Sideband included)

The SAS ports are used to connect the SAS3

drive cables. The four SAS IN ports are des-

ignated JSM1, JSM3, JSM2, and JSM4. Each

port is also compatible with SATA drives.

However, mixing SAS3 and SATA drives is not

recommended.

SidebandDenitions

(JSM1 - JSM4)

Pin#Denition Pin#Denition

A0 SB0 C1 SB4

B2 SB1 D1 SB5

C2 SB2 D2 SB6

B1 SB3 A1 SB7

7. - 10. NVMe IN Ports

The NVMe ports are used to connect the NVMe

drive cables. OCuLink cable CBL-SAST-0820

should be used to connect these ports to the

corresponding ports on add-on card AOC-

SLG3-4E2P. The add-on card in slot 1 of the

motherboard should have its ports CN1, CN2,

CN3, and CN4 connected to the backplane's

ports CN1, CN3, CN5, and CN7, respectively.

The add-on card in slot 2 of the motherboard

should have its ports CN1, CN2, CN3, and

CN4 connected to CN2, CN4, CN6, and CN8,

respectively.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro TwinPro 1029TP-DTR Bedienungsanleitung

Supermicro

Supermicro AS-1020A-T Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1028GR-TR Bedienungsanleitung

Supermicro

Supermicro AS-1024US-TRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-TDW Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015A-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MR-H8TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TR-HTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019P-WT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211SE-31A Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R24L Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-420P-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-421GU-TNXR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MD8-H8TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 620C-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperStorage L-Serie Bedienungsanleitung

Supermicro

Supermicro SuperServer 610U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBA-4119S-C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-C1R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2049U-TR4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung