Supermicro SUPERSERVER 6016T-URF4+ Bedienungsanleitung

SUPERSERVER

6016T-URF4+

6016T-NTRF4+

SUPER ®

USER’S MANUAL

1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: February 4, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 6016T-

URF4+/6016T-NTRF4+. Installation and maintenance should be performed by

experienced technicians only.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X8DTU-LN4F+ serverboard

and the SC819TQ-R700U chassis, which comprise the SuperServer 6016T-

URF4+/6016T-NTRF4+.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer into a rack and

check out the server conﬁguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6016T-URF4+/6016T-NTRF4+.

SUPERSERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTU-LN4F+ serverboard, includ-

ing the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when reconﬁg-

uring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC819TQ-R700U server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

SUPERSERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

UIO..................................................................................................................1-2

Serial ATA ....................................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

SAS/SATA Subsystem.....................................................................................1-3

PCI Expansion Slots....................................................................................... 1-3

Front Control Panel.........................................................................................1-3

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rails .................................................................................2-4

Installing the Outer Rails.................................................................................2-5

Installing the Server into a Telco Rack........................................................... 2-6

vii

Table of Contents

2-6 Checking the Serverboard Setup.................................................................... 2-8

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

UID.................................................................................................................. 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

UID/Overheat/Fan Fail/Power Fail.................................................................. 3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-2

HDD................................................................................................................. 3-2

Power..............................................................................................................3-3

3-4 Drive Carrier LEDs..........................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard...............................................................................5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Processor and Heatsink Installation................................................................5-2

Installing LGA1366 Processors....................................................................... 5-2

Installing the Heatsink.....................................................................................5-4

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables..........................................................................................5-6

viii

SUPERSERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

Connecting Data Cables.................................................................................5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel......................................................................... 5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

5-6 Adding PCI Cards......................................................................................... 5-12

5-7 Serverboard Details ...................................................................................... 5-13

X8DTU-LN4F+ Quick Reference .................................................................. 5-14

5-8 Connector Deﬁnitions.................................................................................... 5-15

5-9 Jumper Settings............................................................................................ 5-23

5-10 Onboard Indicators........................................................................................5-25

5-11 SATA Port Connections................................................................................. 5-26

5-12 Installing Software.........................................................................................5-27

SuperDoctor III.............................................................................................. 5-28

5-13 Onboard Battery............................................................................................5-30

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Hard Drive Installation.....................................................................................6-5

Hard Drive Backplane.....................................................................................6-6

DVD-ROM Drive Installation ...........................................................................6-7

6-4 Power Supply.................................................................................................. 6-8

Power Supply Failure...................................................................................... 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data.........................................................7-1

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-24

7-5 Boot Conﬁguration ........................................................................................ 7-25

7-6 Exit Options...................................................................................................7-26

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 6016T-URF4+/NTRF4+ is a high-end server comprised of two

main subsystems: the SC819TQ-R700U 1U server chassis and the X8DTU-LN4F+

dual processor serverboard. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have been

included with the 6016T-URF4+/6016T-NTRF4+, as listed below:

• One slim DVD-ROM drive (DVM-TEAC-SBT)

• One internal USB cable for DVD-ROM (CBL-0341L)

• One mini SATA to USB adapter for DVD-ROM drive (CDM-USATA-G)

• Five sets of 4-cm counter-rotating fans (FAN-0086L4)

• One air shroud (MCP-310-81901-0B)

• Two passive CPU heatsinks (SNK-P0037P)

• Riser Cards: (see Section 5-6 for details)

One RSC-R1UU-E8R+ and one RSC-R1UU-UE16

• SATA Accessories

One SATA backplane (BPN-SAS-815TQ)

One SAS cable (CBL-0343L, 6016T-URF4+ only)

Four SATA drive carriers (MCP-220-00001-01)

One SATA cable set (CBL-0190L) (6016T-NTRF4+ only)

One SGPIO cable (CBL-0157) (6016T-NTRF4+ only)

• One rackmount kit (MCP-290-00062-0N)

• One CD containing drivers and utilities

• SuperServer 6016T-URF4+/6016T-NTRF4+ User's Manual

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6016T-URF4+/6016T-NTRF4+ lies the X8DTU-

LN4F+, a dual processor serverboard based on the Intel® 5520 + ICH10R chipset.

Below are the main features of the X8DTU-LN4F+. (See Figure 1-1 for a block

diagram of the chipset).

Processors

The X8DTU-LN4F+ supports single or dual Intel® 5500/5600 Series processors in

LGA1366 sockets. Please refer to our web site for a complete listing of supported

processors (www.supermicro.com).

Memory

The X8DTU-LN4F+ features 240-pin DIMM sockets that can support up to 192 GB

of registered ECC DDR3-1333/1066/800 or 48 GB of unbuffered ECC/non-ECC

DDR3-1333/1066/800 SDRAM. Please refer to Chapter 5 for installing memory.

UIO

The X8DTU-LN4F+ is a specially-designed serverboard that features Supermicro's

UIO (Universal I/O) technology. UIO serverboards have a PCI Express 2.0 x8 slot

that can support any one of several types of UIO card types to add SAS ports,

SATA ports, additional LAN ports or other additional functions to the serverboard.

This allows the user to tailor the serverboard to their own needs.

Note: the server does not come with a UIO card installed.

Serial ATA

An on-chip (ICH10R) SATA controller is integrated into the X8DTU-LN4F+ to

provide a six-port, 3 Gb/sec SATA subsystem, which is RAID 0, 1, 5 and 10

supported (RAID 5 is supported with Windows OS only). The SATA drives are

hot-swappable units.

Note: You must have RAID set up to enable the hot-swap capability of the SATA

drives. Documentation on RAID setup guidelines can be found on our web site.

Onboard Controllers/Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB

2.0 ports, PS/2 mouse and keyboard ports, one dedicated IPMI LAN port and four

gigabit Ethernet ports.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperBlade SBA-4119S-C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H8TRF Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1115CS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015A-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110A-16C-RN10SP Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-2029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740P-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-4C-FN13TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018D-MTLN4F Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-WTR Bedienungsanleitung

Supermicro

Supermicro 8U SuperBlade Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-111C-NR Bedienungsanleitung

Supermicro

Supermicro 8025C-3R Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-FRN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer 6025B-UR Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-311A-1C2 Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-3015A-I Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621P-TR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-4MU32JBF Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7125W-S6 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620H-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-640SP-DE2CR60 Bedienungsanleitung

Supermicro

Supermicro 6028R-WTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung