Supermicro MicroBlade Bedienungsanleitung

MicroBlade™

Web-based Management Utility

USER’S MANUAL

Revison 1.0d

MicroBlade Web-based Management Utility USER’S MANUAL

The information in this USER’S MANUAL has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and documentation

may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or

machine without prior written consent.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGESARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY EXPOSE

YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIATO CAUSE

BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revison 1.0d

Release Date: November 23, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the use of

Supermicro's MicroBlade Web-based Management Utility.

Manual Organization

Chapter 1: Introduction

The first chapter provides an introduction about the Web-based Management Utility.

Chapter 2: Blade System

This chapter covers the menu options and controls for the Blade System menu.

Chapter 3: System Health

This chapter covers the menu options and controls for the System Health menu.

Chapter 4: Configuration

This chapter covers the menu options and controls for the Configuration menu.

Chapter 5: Remote Console

This chapter covers the use of the Remote Console menu.

Chapter 6: Maintenance

This chapter covers the use of the Maintenance menu.

MicroBlade Web-based Management Utility USER’S MANUAL

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

‘s-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email:

[email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacific

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 23511

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: +886-(2)-8226-3990

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Network Connection/Login...............................................................1-1

Reset.......................................................................................................1-2

Address Defaults.....................................................................................1-2

1-2 Page Elements and Controls...........................................................1-2

Main Menu Buttons.................................................................................1-3

Chapter 2 Blade System...................................................................2-1

2-1 Blade System Summary Page........................................................2-1

2-2 Blade Status Page............................................................................2-2

Node Status Page...................................................................................2-4

Node Status – Summary Pane.............................................................2-4

Node Status – Sensor Reading Pane..................................................2-6

Node Status – Network Settings Pane.................................................2-7

Node Status – Event Log Pane............................................................2-8

Node Status – FRU Information Page..................................................2-9

Node Status – Date & Time Page......................................................2-10

Node Status – Power/Temperature Record Page..............................2-11

Node Status – Node Product Key Page.............................................2-12

Node Status – Hardware Information Page .......................................2-13

2-3 Power Supply Page........................................................................2-14

Power Supply Status Page...................................................................2-15

Power Supply Status– Summary Pane..............................................2-15

Power Supply Status – FRU Information Page..................................2-16

2-4 Switch Module Page.......................................................................2-17

Switch Module Status Page..................................................................2-18

Switch Module Status– Summary Pane.............................................2-18

Switch Module Status – FRU Information Page.................................2-19

2-5 CMM Page .......................................................................................2-20

2-6 FRU Information..............................................................................2-22

Chapter 3 System Health..................................................................3-1

3-1 Sensor Readings Page....................................................................3-1

3-2 System Event Log Page...................................................................3-3

3-3 Power/Temperature Record Page..................................................3-5

Table of Contents

Chapter 4 Configuration...................................................................4-1

4-1 Alerts Page.........................................................................................4-2

4-2 Date and Time Page.........................................................................4-3

4-3 LDAP Page.........................................................................................4-5

4-4 Active Directory Page.......................................................................4-6

Active Directory - Advanced Settings Page ............................................4-8

4-5 RADIUS Page....................................................................................4-9

4-6 CMM Network Page........................................................................4-10

4-7 Blade IPMI Network Page..............................................................4-12

4-8 Dynamic DNS Page........................................................................4-14

4-9 SMTP Page......................................................................................4-15

4-10 SNMP Page...................................................................................4-16

4-11 SSL Certification Page .................................................................4-18

4-12 Users Page....................................................................................4-19

4-13 Port Page .......................................................................................4-20

4-14 IPAccess Control Page...............................................................4-21

4-15 Web Session Page.......................................................................4-22

4-16 SMC RAKP Page..........................................................................4-23

4-17 Auto Update Redundant CMM Page .........................................4-24

Chapter 5 Remote Console.............................................................5-1

5-1 Console Redirection Page...............................................................5-1

5-2 Launch SOL.......................................................................................5-2

Chapter 6 Maintenance......................................................................6-1

6-1 CMM Firmware Update Page..........................................................6-1

6-2 CMM Unit Reset Page......................................................................6-2

6-3 Factory Default Page........................................................................6-3

6-4 CMM Configuration Page.................................................................6-4

6-5 System Event Log Page...................................................................6-5

6-6 UID Control Page..............................................................................6-6

Appendix A Checking the MAC Address...............................A-A

List of Figures

Figure 1-1. Home Page.....................................................................................1-2

Figure 2-1. Blade System Summary Page........................................................2-1

Figure 2-2. Blade Status Page..........................................................................2-2

Figure 2-3. Blade Status Page – Summary Pane.............................................2-4

Figure 2-4. Blade Status Page – Node Sensor Reading Pane.........................2-6

Figure 2-5. Blade Status Page – Blade IPMI Network Pane.............................2-7

Figure 2-6. Blade Status Page – Event Log Pane ............................................2-8

Figure 2-7. Blade Status Page – FRU Information Pane..................................2-9

Figure 2-8. Blade Status Page – Date &Time Pane........................................2-10

Figure 2-9. Blade Status Page – Power/Temperature Record Pane..............2-11

Figure 2-10. Blade Status Page – Node Product Key Pane ...........................2-12

Figure 2-11. Blade Status Page – Hardware Information Pane......................2-13

Figure 2-12. Power Supply Status Page – Summary Pane............................2-14

Figure 2-13. Power Supply Status Page – Summary Pane............................2-15

Figure 2-14. Power Supply Status Page – FRU Information Pane.................2-16

Figure 2-15. Switch Module Page...................................................................2-17

Figure 2-16. Switch Module Page – Summary Pane......................................2-18

Figure 2-17. Switch Module Page – FRU Information Pane...........................2-19

Figure 2-18. CMM Status Summary Page......................................................2-20

Figure 2-19. CMM Status – FRU Information Page........................................2-21

Figure 2-20. Blade System – Middle Plane FRU Information Page................2-22

Figure 3-1. Sensor Readings Page...................................................................3-1

Figure 3-2. System Event Log Page.................................................................3-3

Figure 3-3. Event Log – Advanced Settings Page............................................3-4

Figure 3-4. System Event Log Page.................................................................3-5

Figure 4-1. Blade Status Page..........................................................................4-2

Figure 4-2. Modify Alert Page ...........................................................................4-3

Figure 4-3. Date and Time Page.......................................................................4-3

Figure 4-4. LDAP Page.....................................................................................4-5

Figure 4-5. Active Directory Page.....................................................................4-6

Figure 4-6. Add Role Group Page.....................................................................4-7

Figure 4-7. Modify Role Group Page ................................................................4-7

Figure 4-8. Active Directory - Advanced Settings Page....................................4-8

Figure 4-9. RADIUS Page.................................................................................4-9

Figure 4-10. CMM NetworkPage.....................................................................4-10

Figure 4-11. Blade IPMI Network Page...........................................................4-12

Figure 4-12. Dynamic DNS Page....................................................................4-14

MicroBlade Web-based Management Utility USER’S MANUAL

Figure 4-13. SMTP Page ................................................................................4-15

Figure 4-14. SNMP Page................................................................................4-16

Figure 4-15. Add New SNMPv3 User Screen.................................................4-17

Figure 4-16. Modify SNMPv3 User Screen.....................................................4-17

Figure 4-17. SSL Certification Page................................................................4-18

Figure 4-18. Users Page.................................................................................4-19

Figure 4-19. Port Setting Page........................................................................4-20

Figure 4-20. IP Access Control Page..............................................................4-21

Figure 4-21. Web Session Page.....................................................................4-22

Figure 4-22. SMC RAKP Page........................................................................4-23

Figure 4-23. Auto Update Redundant CMM Page..........................................4-24

Figure 5-1. Console Redirection Page..............................................................5-1

Figure 5-2. SOL Console Page.........................................................................5-2

Figure 6-1. Update Firmware Page...................................................................6-1

Figure 6-2. Unit Reset Page..............................................................................6-2

Figure 6-3. Factory Default Page......................................................................6-3

Figure 6-4. CMM Configuration Page ...............................................................6-4

Figure 6-5. List of System Event Log Page.......................................................6-5

Figure 6-6. List of System Event Log Page.......................................................6-6

Figure A-1. Checking the MAC Address using the Command Line Interface..A-A

List of Tables

Table 1-1. Address Defaults..............................................................................1-2

Table 1-2. Home Page Elements and Controls.................................................1-3

Table 1-3. Main Menu Buttons..........................................................................1-3

Table 2-1. Blade Status Page Controls.............................................................2-3

Table 2-2. Blade Status Page – Summary Pane Controls................................2-5

Table 2-3. Blade Status Page – Node Sensor Reading Pane Controls............2-6

Table 2-4. Blade Status Page – Network Settings Pane Controls....................2-7

Table 2-5. Blade Status Page – Event Log Pane Controls...............................2-8

Table 2-6. Blade Status Page – Date & Time Pane Controls .........................2-10

Table 2-7. Blade Status Page – Power/Temperature Record Pane Controls.2-11

Table 2-8. Blade Status Page – Node Product Key Pane Controls................2-12

Table 2-9. Power Supply Status Page – Summary Pane Controls.................2-14

Table 2-10. Power Supply Status Page – Summary Pane Controls...............2-15

Table 2-11. Switch Module Page Controls......................................................2-17

Table 2-12. Switch Module Page – Summary Pane Controls.........................2-19

Table 2-13. CMM Status – Summary Page Controls......................................2-20

Table 3-1. Sensor Readings Page Controls......................................................3-2

Table 3-2. System Event Log Page Controls....................................................3-3

Table 3-3. System Event Log Page Controls....................................................3-5

Table 4-1. Blade Status Page Controls.............................................................4-2

Table 4-2. Date and Time Page Controls..........................................................4-4

Table 4-3. LDAP Page Controls........................................................................4-5

Table 4-4. Active Directory Page Controls........................................................4-6

Table 4-5. RADIUS Page Controls....................................................................4-9

Table 4-6. CMM Network Page Controls ........................................................4-11

Table 4-7. Blade IPMI Network Page Controls ...............................................4-13

Table 4-8. Dynamic DNS Page Controls.........................................................4-14

Table 4-9. SMTP Page Controls.....................................................................4-15

Table 4-10. SNMP Page Controls...................................................................4-16

Table 4-11. SSL Certification Page Controls ..................................................4-18

Table 4-12. Users Page Controls....................................................................4-19

Table 4-13. Port Setting Page Controls ..........................................................4-20

Table 4-14. IP Access Control Page Controls.................................................4-21

Table 4-15. Web Session Page Controls........................................................4-22

Table 4-16. SMC RAKP Page Controls..........................................................4-23

Table 4-17. Auto Update Redundant CMM Page Controls.............................4-24

Table 5-1. Console Redirection Page Controls.................................................5-2

MicroBlade Web-based Management Utility USER’S MANUAL

xii

Notes

Table 5-2. SOL Console Page Controls............................................................5-2

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro 7048GR-TR Betriebsanleitung

Supermicro

Supermicro SuperServer SYS-221HE-FTNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 6017R-WTRFTP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GP-DNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028GQ-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029GP-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9P-FN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12NR Bedienungsanleitung

Supermicro

Supermicro A+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 620C-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-420P-1C2N Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029GQ-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E302-9D Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro A+ AS-2014TP-HTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 8049U-E1CR4T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-611C-TN4R Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-FDWTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung