Supermicro SuperServer 6017R-WTRFTP Bedienungsanleitung

SUPERSERVER®

6017R-WTRFTP

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: February 19, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 6017R-WTRFTP.

Installation and maintenance should be performed by experienced technicians only.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9DRW-iTPF serverboard and

the SC819TQ-R700WB chassis, which comprise the SuperServer 6017R-WTRFTP.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer into a rack and

check out the server conguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6017R-WTRFTP.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRW-iTPF serverboard, includ-

ing the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when recong-

uring the serverboard.

SUPERSERVER 6017R-WTRFTP User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC819TQ-R700WB server chas-

sis. You should follow the procedures given in this chapter when installing, removing

or reconguring hard drives or peripheral drives and when replacing system power

supply modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

PCI Expansion Slots ....................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Inner Rails ................................................................................. 2-4

Installing the Outer Rails................................................................................. 2-5

Installing the Server into a Telco Rack ........................................................... 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

SUPERSERVER 6017R-WTRFTP User's Manual

vii

Table of Contents

UID .................................................................................................................. 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Information LED .............................................................................................. 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-5 Processor and Heatsink Installation................................................................ 5-2

Installing an LGA 2011 Processor................................................................... 5-2

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel......................................................................... 5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

5-6 Adding PCI Cards ......................................................................................... 5-13

viii

5-7 Serverboard Details ...................................................................................... 5-14

X9DRW-iTPF Quick Reference..................................................................... 5-15

5-8 Connector Denitions.................................................................................... 5-17

5-9 Jumper Settings ............................................................................................ 5-25

5-10 Onboard Indicators........................................................................................ 5-27

5-11 SATA Ports .................................................................................................... 5-29

5-12 Installing Software......................................................................................... 5-30

SuperDoctor III.............................................................................................. 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Hard Drive Installation..................................................................................... 6-5

Hard Drive Backplane ..................................................................................... 6-6

DVD-ROM Drive Installation ........................................................................... 6-7

6-4 Power Supply.................................................................................................. 6-8

Power Supply Failure...................................................................................... 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-27

7-5 IPMI............................................................................................................... 7-29

7-6 Boot............................................................................................................... 7-31

7-7 Security......................................................................................................... 7-32

7-8 Save & Exit ................................................................................................... 7-33

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSERVER 6017R-WTRFTP User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 6017R-WTRFTP is a high-end server comprised of two main

subsystems: the SC819TQ-R700WB 1U server chassis and the X9DRW-iTPF dual

processor serverboard. Please refer to our website for information on operating

systems that have been certied for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6017R-WTRFTP, as listed below:

•Five sets of 4-cm counter-rotating fans (FAN-0101L4)

•Two passive CPU heatsinks (SNK-P0047PS)

•Riser Cards

One RSC-R1UW-2E16

One RSC-R1UW-E8R

•SATA Accessories

One SAS/SATA backplane (BPN-SAS-815TQ)

Four drive carriers (MCP-220-00075-0B)

•One rackmount kit (MCP-290-00062-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6017R-WTRFTP User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6017R-WTRFTP lies the X9DRW-iTPF, a dual pro-

cessor serverboard based on the Intel® C606 chipset. Below are the main features

of the serverboard. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X9DRW-iTPF supports single or dual Intel® E5-2600 Series (Socket R) pro-

cessors in LGA 2011 sockets. Please refer to our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The X9DRW-iTPF features 16 DIMM slots that can support up to 1 TB of ECC

LRDIMM, 512 GB of ECC RDIMM, or 128 GB of ECC/non-ECC UDIMM DDR3-

1866/1600/1333/1066/800 memory. Please refer to Chapter 5 for installing memory.

Serial ATA

An on-chip SATA controller is integrated into the X9DRW-iTPF to provide a 10-port

SATA subsystem (two SATA 3.0 ports and eight SATA 2.0 ports), which is RAID

0, 1, 5 and 10 supported (RAID 5 is supported with Windows OS only). The SATA

drives are hot-swappable units.

Note: You must have RAID set up to enable the hot-swap capability of the SATA

drives. Documentation on RAID setup guidelines can be found on our website.

Rear I/O Ports

The I/O ports iat the rear of the serverboard nclude one COM port, a VGA (monitor)

port, two USB 2.0 ports, PS/2 mouse and keyboard ports, one dedicated IPMI LAN

port, two 1 Gb LAN (Ethernet) ports and two 10 Gb SFP+ LAN ports.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 420GP-TNAR Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro SuperServe 1019D-FHN13TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-73DBRF Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TNR Bedienungsanleitung

Supermicro

Supermicro 7047R-72RF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-NT Bedienungsanleitung

Supermicro

Supermicro SuperStorage 2029P-DN2R24L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6029BT-HNC0R Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-N32JBF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029TP-HTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Montageanleitung

Supermicro

Supermicro SuperServer 1019S-WR Bedienungsanleitung

Supermicro

Supermicro X13SRA-TF Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-743A-N4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNR Bedienungsanleitung

Supermicro

Supermicro A+ AS-2014TP-HTR Bedienungsanleitung

Supermicro

Supermicro SC847 CHASSIS SERIES Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-640SP-DE2CR60 Bedienungsanleitung

Supermicro

Supermicro 2042G-72RF4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-12TN4 Bedienungsanleitung

Supermicro

Supermicro AS-2114S-WN24RT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121C-TN10R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung