Supermicro SBI-6129P-C3N Bedienungsanleitung

SBI-6129P-C3N

SuperBlade Module

User’s Manual

Revision 1.0c

SBI-6129P-C3N SuperBlade Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, and

makes no commitment to update or to keep current the information in this manual, or to notify any person

or organization of the updates. Please Note: For the most up-to-date version of this manual, please

see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT,

INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR

RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in an industrial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

Manual Revision 1.0c

Release Date: August 31,2020

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document. Information in this document is subject to change without notice. Other

products and companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of the Supermicro SuperBlade®system’s SBI-6129P-C3N

SuperBlade module. Installation and maintenance should be performed by experienced

professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with

SBI-6129P-C3N SuperBlade module and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing SBI-6129P-C3N

SuperBlade module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBI-6129P-C3N SuperBlade module

into the SuperBlade chassis. Other sections cover the installation and placement of

memory modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about SBI-6129P-C3N

SuperBlade module. Included here are descriptions and information for mainboard

components, connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for SBI-6129P-C3N SuperBlade module.

Appendix A: BIOS POST Codes

BIOS POST Codes for SBI-6129P-C3N SuperBlade module are explained in this

appendix.

Secure Data Deletion

A secure data deletion tool designed to fully erase all data from storage devices can be

found on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/

wftp/utility/Log9_Secure_Data_Deletion_Utility/

SBI-6129P-C3N SuperBlade Module User’s Manual

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Blade Module Features ....................................................................1-2

Processors ..............................................................................................1-2

Memory ................................................................................................... 1-3

Storage ...................................................................................................1-3

RAID .......................................................................................................1-3

Enclosure Requirements.........................................................................1-3

Density ....................................................................................................1-4

BMC Password .......................................................................................1-4

1-4 Contacting Supermicro.....................................................................1-5

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements .....................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker ........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area .......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage ................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning .........................................................................2-14

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing Blade Modules ..................................................................3-1

Powering Up a Blade Unit.......................................................................3-1

Powering Down a Blade Unit ..................................................................3-1

Removing a Blade Unit from the Enclosure ............................................ 3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

SBI-6129P-C3N SuperBlade Module User’s Manual

3-3 Processor Installation .......................................................................3-4

Overview of the Processor Socket Assembly .........................................3-5

Overview of the Processor Heatsink Module (PHM)...............................3-6

Attaching the Processor to the Narrow Processor Clip to Create the

Processor Package Assembly ................................................................3-7

Attaching the Processor Package Assembly to the Heatsink to Form the

Processor Heatsink Module (PHM).........................................................3-8

Preparing the CPU Socket for Installation ............................................3-10

Removing the Dust Cover from the CPU Socket ..................................3-10

Removing the Processor Heatsink Module (PHM) from the Motherboard...

3-12

3-4 Onboard Battery Installation..........................................................3-13

3-5 Memory Installation.........................................................................3-13

Memory Support ...................................................................................3-13

Memory Population Guidelines .............................................................3-15

Memory Population Sequence..............................................................3-16

Installing Memory..................................................................................3-16

ESD Precautions................................................................................ 3-16

Installing Memory ............................................................................... 3-17

Removing Memory.............................................................................3-17

3-6 Hard Disk Drive Installation ...........................................................3-18

3-7 Installing the Operating System....................................................3-19

Installing with an External USB CD-ROM Drive....................................3-19

Installing via PXE Boot..........................................................................3-19

Installing via Virtual Media (Drive Redirection) .....................................3-19

3-8 Management Software ................................................................... 3-19

3-9 Configuring and Setting up RAID .................................................3-20

Chapter 4 Blade Module Features..............................................4-1

4-1 Control Panel .....................................................................................4-2

Power Button ..........................................................................................4-2

4-2 Mainboard...........................................................................................4-3

CMOS Clear............................................................................................4-5

Jumper Settings ......................................................................................4-5

4-3 Blade Unit Components ...................................................................4-6

Memory Support .....................................................................................4-7

Hard Disk Drives .....................................................................................4-7

vii

Table of Contents

Chapter 5 BIOS.......................................................................................5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility .........................................................................5-1

5-2 BIOS Updates....................................................................................5-2

5-3 Running Setup ...................................................................................5-2

5-4 Main BIOS Setup...............................................................................5-3

5-5 Advanced Setup ................................................................................5-5

5-6 Event Logs Setup............................................................................5-17

5-7 IPMI Setup........................................................................................5-19

5-8 Security .............................................................................................5-21

5-9 Boot ...................................................................................................5-23

5-10 Save & Exit.....................................................................................5-25

Appendix A Updating BIOS Using KVM Console..............A-1

SBI-6129P-C3N SuperBlade Module User’s Manual

viii

Notes

1-1

Chapter 1: Introduction

Chapter 1

Introduction

1-1 Overview

This user’s manual covers the SBI-6129P-C3N blade module. This blade module is a

compact self-contained server that connects into a pre-cabled enclosure that provides

power, cooling, management and networking functions. One enclosure for the

SBI-6129P-C3N blade module can hold up to 10 blade units in the 6U Enclosure

SBE-610J(B)-822/622/422 model enclosures (8x2200W power supplies required for full

enclosure capacity).

In this manual, “blade system” refers to the entire system (including the enclosure and

blades units), “blade” or “blade unit” refers to a single blade module, “Node” refers to a

single node in each blade module and “blade enclosure” is the chassis that the blades,

power supplies and modules are housed within.

Please refer to our website for information on operating systems that have been certified

for use with the SuperBlade (www.supermicro.com/products/superblade/).

Note: For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information: ttp://www.supermicro.com/about/policies/

safety_information.cfm

• If you have any questions, please contact our support team at:

support@supermicro.com

Note: A complete list of safety warnings is provided on the Supermicro website at

http://www.supermicro.com/about/policies/safety_information.cfm.

1-2 Product Checklist of Typical Components

Your blade module ships with its B11DPE mainboard already installed in its chassis.

Memory, hard disk drives and the CPU must all be installed by the user after shipment.

See Chapter 3: "Setup and Installation" on page 3-1 for details on installation of these

components.

The blade module’s serverboard can have a mezzanine card added to your blade

module for InfiniBand, which allows you to use InfiniBand communication for your blade

module.

Typical support modules for systems with the SBI-6129P-C3N blade module when

mounted in an 6U enclosure system include the following:

• MBM-CMM-001 or MBM-CMM-FIO CMM module (up to 2)

• MBM-XEM-002 10G switch modules (up to 4)

SBI-6129P-C3N SuperBlade Module User’s Manual

1-2

• SBM-25G-100 switch modules (up to 4)

1-3 Blade Module Features

Table 1-1 lists the main features of the SBI-6129P-C3N blade module. See the

proceeding section for components typically included in a blade system and other

optional components. Specific details for the SBI-6129P-C3N blade module are found in

Chapter 4: "Blade Module Features" on page 4-1.

Processors

The SBI-6129P-C3N SuperBlade module supports two Intel Xeon Scalable, Socket P

LGA 3647 series processors.

Refer to the Supermicro website for a complete listing of supported processors (http://

www.supermicro.com/products/superblade). Please note that you will need to check the

detailed specifications of a particular blade module for a list of the CPUs it supports.

Details on installation of the processor into the SBI-6129P-C3N SuperBlade module are

found in Chapter 3: "Setup and Installation" on page 3-1.

Table 1-1. SBI-6129P-C3N SuperBlade Module Specification Features

Mainboard B11DPE (proprietary form factor)

Processors Dual Intel™Xeon®Scalable Socket P LGA3647 processors for each node.

Please refer to our website for a complete listing of supported processors.

UPI Speed UPI up to 10.4 GT/s

Chipset One Intel C622 chip set

Graphics Controller Integrated Aspeed AST2500 VGA Graphics chip for each node

BIOS 128 Mb SPI Flash EEPROM with AMI® BIOS for each node

Memory Capacity

Supports up to 3 TB of RDIMM/LRDIMM DDR4 2666/2400 MHz speed and 8

GB, 16 GB, 32 GB, 64 GB and 128 GB size SDRAM memory in twenty-four (24)

288-pin DIMM sockets. See https://www.supermicro.com/support/resources/

memory/X11_memory_config_guide.pdf for details.

Hard Drive Bays Includes two hot-swap 2.5" NVMe disk drives plus one hot-swap 2.5" SAS3/

SATA3 drive or three 2.5" SAS3/SATA3 drives

Add-on Cards

The SBI-6129P-C3N blade module can use optional add-on cards for a TPM

security module, Intel VROC RAID card or a Hardware RSTe key upgrade

module.

System Weight 12.6 lbs (5.72 kg)

System Dimensions (HxWxD): 9.75 x 1.75 x 23.5” (247.65 x 44.45 x 596.9-mm)

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-510T-WTR-EU Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1015B-3 Bedienungsanleitung

Supermicro

Supermicro SuperServer 4027GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221P-C9R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6010H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-M3 Bedienungsanleitung

Supermicro

Supermicro SuperServe 1019D-FHN13TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-611E-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-WT8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-TN24R4T Bedienungsanleitung

Supermicro

Supermicro SuperServer F618R2-RC0+ Bedienungsanleitung

Supermicro

Supermicro 8052-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Supermicro

Supermicro X13SRA-TF Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6025B-UR Bedienungsanleitung

Supermicro

Supermicro SuperServer 4029GP-TRT Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WTR Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation SYS-740A-T Bedienungsanleitung

Supermicro

Supermicro 1027R-73DAF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung