Supermicro SBI-7126T-SH Bedienungsanleitung

SBI-7126T-SH

Blade Module

User’s Manual

Revison 1.0a

SBI-7126T-SH Blade Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

Manual Revison 1.0a

Release Date: August 30, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE

STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER

REPRODUCTIVE HARM.

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's SBI-7126T-SH blade module. Installation and

maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the

SBI-7126T-SH blade module and describes its main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the SBI-7126T-SH

blade module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBI-7126T-SH blade module into the

Superblade chassis. Other sections cover the installation and placement of memory

modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about the SBI-7126T-SH blade

module. Included here are descriptions and information for mainboard components,

connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for the SBI-7126T-SH blade module.

Appendix A: BIOS POST Codes

BIOS POST Codes for the SBI-7126T-SH blade module are explained in this appendix.

SBI-7126T-SH Blade Module User’s Manual

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Blade Module Features....................................................................1-2

Processors..............................................................................................1-2

Memory...................................................................................................1-3

Storage....................................................................................................1-3

Density....................................................................................................1-4

1-4 Contacting Supermicro.....................................................................1-5

Chapter 2 System Safety..................................................................2-1

2-1 Electrical Safety Precautions...........................................................2-1

2-2 General Safety Precautions.............................................................2-2

2-3 Electrostatic Discharge Precautions ..............................................2-2

2-4 Operating Precautions......................................................................2-2

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing Blade Modules..................................................................3-1

Powering Up a Blade Unit.......................................................................3-1

Powering Down a Blade Unit ..................................................................3-1

Removing a Blade Unit from the Enclosure............................................3-1

Removing/Replacing the Blade Cover....................................................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Processor Installation.......................................................................3-4

3-4 Onboard Battery Installation............................................................3-7

3-5 Memory Installation...........................................................................3-7

Populating Memory Slots........................................................................3-7

DIMM Installation ..................................................................................3-10

3-6 Hard Disk Drive Installation...........................................................3-11

3-7 Installing the PCI-E Add-on Card .................................................3-12

3-8 Installing the Operating System....................................................3-14

Installing with an External USB CD-ROM Drive....................................3-14

Installing via PXE Boot..........................................................................3-14

Installing via Virtual Media (Drive Redirection) .....................................3-15

SBI-7126T-SH Blade Module User’s Manual

3-9 Management Software...................................................................3-15

3-10 Configuring and Setting up RAID...............................................3-15

Chapter 4 Blade Module Features..............................................4-1

4-1 Control Panel.....................................................................................4-2

Power Button ..........................................................................................4-3

KVM Button.............................................................................................4-3

LED Indicators ........................................................................................4-3

KVM Connector.......................................................................................4-3

4-2 Mainboard...........................................................................................4-4

Jumpers..................................................................................................4-6

CMOS Clear............................................................................................4-6

4-3 Blade Unit Components...................................................................4-7

Memory Support .....................................................................................4-8

Hard Disk Drives.....................................................................................4-8

Chapter 5 BIOS.......................................................................................5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility..........................................................................5-1

5-2 BIOS Updates....................................................................................5-2

Flashing BIOS.........................................................................................5-2

5-3 Running Setup...................................................................................5-3

5-4 Main BIOS Setup...............................................................................5-4

5-5 Advanced Setup................................................................................5-4

5-6 Boot...................................................................................................5-14

5-7 Security.............................................................................................5-15

5-8 Exit.....................................................................................................5-16

Appendix A BIOS POST Codes....................................................A-1

A-1 BIOS POST Messages....................................................................A-1

A-2 BIOS POST Codes...........................................................................A-4

Recoverable POST Errors......................................................................A-4

Terminal POST Errors.............................................................................A-4

vii

List of Figures

Figure 1-1. Full Rack of Blade Enclosures and Blade Servers.........................1-4

Figure 3-1. Inserting a Blade into the Enclosure...............................................3-3

Figure 3-2. Locking the Blade into Position.......................................................3-3

Figure 3-3. Installing a Processor in a Socket...................................................3-6

Figure 3-4. Installing the Onboard CR2032 Battery..........................................3-7

Figure 3-5. 8-Slot DIMM Numbering.................................................................3-9

Figure 3-6. Installing a DIMM into a Memory Slot...........................................3-10

Figure 3-7. Installing a Hard Drive in a Carrier................................................3-12

Figure 3-8. Attaching Add-On Card to Cover Shield.......................................3-13

Figure 3-9. Attaching Add-On Card to Riser Card ..........................................3-13

Figure 4-1. SBI-7126T-SH Blade Module Front View.......................................4-1

Figure 4-2. Blade Control Panel........................................................................4-2

Figure 4-3. B8DTP Mainboard..........................................................................4-4

Figure 4-4. Intel IOH-36D Tylersburg Chipset Block Diagram..........................4-5

Figure 4-5. Exploded View of SBI-7126T-SH Blade Module.............................4-7

SBI-7126T-SH Blade Module User’s Manual

viii

Notes

List of Tables

Table 1-1. SBI-7126T-SH Blade Specification Features...................................1-2

Table 1-2. RDIMM Population for the SBI-7126T-SH w/5500 Processors Installed

1-3

Table 1-3. UDIMM Population for the SBI-7126T-SH w/5500 Processors Installed

1-3

Table 3-1. Populating Twelve Memory Slots for Interleaved Operation............3-8

Table 4-1. SBI-7126T-SH Blade Module Features ...........................................4-1

Table 4-2. Blade Control Panel.........................................................................4-2

Table 4-3. Blade Module LED Indicators ..........................................................4-3

Table 4-4. B8DTP Mainboard Layout................................................................4-5

Table 4-5. Main Components of SBI-7126T-SH Blade Module ........................4-7

Table 5-1. Main BIOS Setup Menu Options......................................................5-4

Table 5-2. Advanced Setup Menu Options.......................................................5-4

Table 5-3. CPU and Clock Configuration Sub-menu ........................................5-5

Table 5-4. IDE Configuration Menu...................................................................5-6

Table 5-5. PCIPnP Configuration Sub-menu....................................................5-7

Table 5-6. SuperIO Configuration Sub-menu....................................................5-8

Table 5-7. Chipset Configuration Sub-menu.....................................................5-8

Table 5-8. ACPI Configuration Sub-menu.......................................................5-10

Table 5-9. AHCI Configuration Sub-menu ......................................................5-11

Table 5-10. Event Log Configuration Sub-menu.............................................5-11

Table 5-11. IPMI Configuration Sub-menu......................................................5-11

Table 5-12. Remote Access Configuration Sub-menu....................................5-13

Table 5-13. System Health Monitor Sub-menu...............................................5-14

Table 5-14. Boot Setup Menu Options............................................................5-14

Table 5-15. Security Menu Options.................................................................5-16

Table 5-16. Exit Menu Options........................................................................5-16

Table A-1. BIOS POST Messages....................................................................A-1

Table A-2. Terminal POST Errors.....................................................................A-4

Table A-3. Boot Block Flash ROM Terminal POST Errors................................A-8

SBI-7126T-SH Blade Module User’s Manual

Notes

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperBlade SBI-610P-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-MTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-ACR16H Bedienungsanleitung

Supermicro

Supermicro 8014T-T Bedienungsanleitung

Supermicro

Supermicro 8060 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-MN4 Bedienungsanleitung

Supermicro

Supermicro SC116AC2-R706WB Bedienungsanleitung

Supermicro

Supermicro A+ AS-1113S-WN10RT Bedienungsanleitung

Supermicro

Supermicro SuperServer E301-9D-8CN8TP Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-421E-1T3N Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-M4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9C Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-641E-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 4028GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1025C-3 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6048R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019C-FHTN8 Bedienungsanleitung

Supermicro

Supermicro E100-9APP Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE2CR60 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013A-T Bedienungsanleitung

Supermicro

Supermicro SYS-1028UX-LL1-B8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211GT-HNTF Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740P-TR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung