Supermicro SuperServer 6048R-TXR Bedienungsanleitung

SUPERSERVER®

6048R-TXR

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: April 7, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6048R-TXR

server. Installation and maintenance should be performed by experienced

technicians only.

The SuperServer 6048R-TXR is based on the SC842XTQ-R606B 4U rackmount

server chassis and the Super X10DRX serverboard. Please refer to our website for

an up-to-date list of supported operating systems, processors and memory.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X10DRX serverboard

and the SC842XTQ-R606B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the system into a rack and

check out the server conguration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

system.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRX serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

serverboard.

iii

Preface

SUPERSERVER 6048R-TXR User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC842XTQ-R606B server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: System Specications

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

IPMI................................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Mounting the Chassis in an Open (Telco) Style Rack.................................... 2-4

Rail System Overview..................................................................................... 2-5

Separating the Sections of the Rack Rails..................................................... 2-5

Installing the Inner Rails ................................................................................. 2-6

Outer Rack Rails............................................................................................. 2-7

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

SUPERSERVER 6048R-TXR User's Manual

vii

Table of Contents

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Information LED .............................................................................................. 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA 2011 Processor................................................................... 5-4

Installing a CPU Heatsink ............................................................................... 5-7

Removing the Heatsink................................................................................... 5-8

5-6 Installing Memory............................................................................................ 5-9

viii

Memory Support....................................................................................... 5-10

5-6 Adding PCI Add-On Cards.............................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-13

X10DRX Quick Reference ............................................................................ 5-13

5-8 Connector Denitions.................................................................................... 5-15

5-9 Jumper Settings ............................................................................................ 5-21

5-10 Onboard Indicators........................................................................................ 5-23

5-11 SATA Ports .................................................................................................... 5-24

5-12 Installing Software......................................................................................... 5-25

SuperDoctor® 5 ............................................................................................ 5-26

5-13 Onboard Battery............................................................................................ 5-27

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Accessing the Inside of the System................................................................ 6-3

6-4 System Fans ................................................................................................... 6-4

System Fan Failure......................................................................................... 6-4

Installing the Rear Exhaust Fans.................................................................... 6-4

6-5 Drive Bay Installation/Removal ....................................................................... 6-5

Hot-Swap Drive Bays...................................................................................... 6-5

Installing a Peripheral Drive............................................................................ 6-7

6-6 Power Supply.................................................................................................. 6-8

Power Supply Failure...................................................................................... 6-8

Replacing the Power Supply........................................................................... 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-3

7-4 Event Logs .................................................................................................... 7-31

4-5 IPMI............................................................................................................... 7-33

7-6 Security Settings ........................................................................................... 7-36

7-7 Boot Settings................................................................................................. 7-39

7-8 Save & Exit ................................................................................................... 7-41

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSERVER 6048R-TXR User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 6048R-TXR is comprised of two main subsystems: the

SC842XTQ-R606B 4U server chassis and the X10DRX dual Intel Xeon processor

serverboard. Please refer to our website for information on operating systems that

have been certied for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the server, as listed below:

•Two 8-cm rear exhaust fans (FAN-0082L4)

•One 9-cm front intake fan (FAN-0097L4)

•Two active CPU heatsinks (SNK-P0048AP4)

•SATA accessories:

One HDD backplane (BPN-SAS-842TQ)

Five 3.5" hard disk drive trays (MCP-220-00075-0B)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

•If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6048R-TXR User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6048R-TXR lies the X10DRX, a dual processor

serverboard based on the Intel C612 chipset. Below are the main features of the

X10DRX. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The X10DRX supports two Intel®E5-2600 v3 series processors in LGA 2011 sockets

(Socket R3). Please refer to the serverboard description pages on our website for

a complete listing of supported processors (www.supermicro.com).

Memory

The X10DRX has sixteen DIMM slots that can support up to 1024 GB of LRDIMM

or 512 GB of RDIMM DDR4-2133/1866/1600 memory. Modules of the same size

and speed are recommended. See Chapter 5 for details.

Serial ATA

A SATA controller is integrated into the chipset to provide a ten-port SATA 3.0

subsystem, which is RAID 0, 1, 5 and 10 supported. The I-SATA0 through I-SATA5

ports are supported by the Intel PCH while the S-SATA0 through S-SATA0-3 ports

are supported by the Intel SCU. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the Serial ATA drives.

PCI Expansion Slots

The X10DRX has ten PCI-E 3.0 x8 and one PCI-E 2.0 x4 (in x8) slots for a total

of eleven PCI expansion slots.

Rear I/O Ports

The I/O ports include one COM port, a VGA (monitor) port, four USB 2.0 ports, a

dedicated IPMI LAN port and two Gb Ethernet LAN ports.

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface

specication that provides remote access, monitoring and administration for

Supermicro server platforms. IPMI allows server administrators to view a server’s

hardware status remotely, receive an alarm automatically if a failure occurs, and

power cycle a system that is non-responsive.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 530MT-H12TRF Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro AS-2014CS-TR Bedienungsanleitung

Supermicro

Supermicro FatTwin F627G2-FT+ Bedienungsanleitung

Supermicro

Supermicro SBA-7141A-T Bedienungsanleitung

Supermicro

Supermicro FatTwin F629P3-RTB Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-530MT-H8TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-T Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-610P-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-NR32R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025TC-10G Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2015HS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DTR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-4CN8 Bedienungsanleitung

Supermicro

Supermicro FatTwin F617H6-FTL+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-MT Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R24L Bedienungsanleitung

Supermicro

Supermicro Supero C7Z370-CG-IW Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028UX-CR-LL1 Bedienungsanleitung

Supermicro

Supermicro 8U SuperBlade Bedienungsanleitung

Supermicro

Supermicro S-1600 R4 Gebrauchs- und Pflegehandbuch

Supermicro

Supermicro SuperStorage SSG-136R-N32JBF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung