Supermicro SUPERSERVER 4028GR-TR Bedienungsanleitung

USER’S MANUAL

Revision 1.0c

SUPERSERVER®

4028GR-TR

4028GR-TRT

4028GR-TR2

4028GR-TRT2

Проконсультироваться икупить данное оборудование вы можете вкомпании «АНД-Системс»

адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]

При обращении используйте промокод AND-PDF иполучите скидку.

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0c

Release Date: November 04, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 4028GR-TR(T)(2).

Installation and maintenance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (http://www.supermicro.

com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 4028GR-TR(T)(2) Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Input/Output Ports........................................................................................... 1-2

Daughter Cards............................................................................................... 1-4

IPMI................................................................................................................. 1-5

1-3 Chassis Features ............................................................................................ 1-5

System Power................................................................................................. 1-5

SATA Subsystem............................................................................................. 1-5

Front Control Panel......................................................................................... 1-5

Cooling System............................................................................................... 1-5

1-4 GPU Subsystem.............................................................................................. 1-5

1-5 Contacting Supermicro.................................................................................... 1-7

Chapter 2 Rack Installation

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

General Server Precautions............................................................................ 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Sufcient Airow ......................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Procedure for Rack Mounting ......................................................................... 2-4

Identifying the Inner Rack Rails...................................................................... 2-4

Installing the Inner Rails on the Chassis ........................................................ 2-5

Installing the Outer Rails onto the Rack......................................................... 2-6

Installing the Chassis into a Rack................................................................... 2-7

Removing the Chassis from the Rack ............................................................ 2-8

Preface

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

Reset............................................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Power .............................................................................................................. 3-2

HDD................................................................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

Information LED .............................................................................................. 3-3

Power Fail ....................................................................................................... 3-3

Overheating..................................................................................................... 3-4

Overheat Temperature Setting ................................................................... 3-4

Responses.................................................................................................. 3-4

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-5

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

SUPERSERVER 4028GR-TR(T)(2) Manual

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 Input/Output Ports........................................................................................... 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA 2011 Processor................................................................... 5-4

Installing a CPU Heatsink ............................................................................... 5-7

Removing the Heatsink .................................................................................. 5-7

5-5 Installing Memory............................................................................................ 5-8

Processor/DIMM Population Congurations .............................................. 5-9

5-6 Motherboard Details...................................................................................... 5-10

PCI-E Daughter Board .................................................................................. 5-12

5-7 Connector Denitions.................................................................................... 5-13

Power Connectors ....................................................................................... 5-13

Control Panel Connectors............................................................................. 5-14

Rear Input/Output Connections..................................................................... 5-17

Internal Headers............................................................................................ 5-18

5-8 Jumper Settings ............................................................................................ 5-20

5-9 Onboard Indicators........................................................................................ 5-22

5-10 SATA Ports .................................................................................................... 5-23

5-11 Installing Software......................................................................................... 5-24

SuperDoctor®5 ............................................................................................. 5-25

5-12 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-2

Precautions ..................................................................................................... 6-2

6-2 Removing Power from the System ................................................................. 6-2

6-3 Installing Hard Drives...................................................................................... 6-3

6-4 Removing the Chassis Cover ......................................................................... 6-5

6-5 Installing Expansion Cards ............................................................................. 6-6

6-6 Installing the Air Shroud.................................................................................. 6-7

6-7 Replacing Fans ............................................................................................... 6-9

6-8 Power Supply................................................................................................ 6-10

vii

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-37

7-5 IPMI............................................................................................................... 7-39

7-6 Security Settings ........................................................................................... 7-42

7-7 Boot Settings................................................................................................. 7-45

7-8 Save & Exit ................................................................................................... 7-48

Appendix A BIOS Error Beep Codes

Appendix B System Specications

viii

Notes

Chapter 1

Introduction

1-1 Overview

The SuperServer 4028GR-TR(T)(2) is a GPU/Xeon Phi optimized server comprised

of two main subsystems: the SC418GTS-R3200B/R4000B 4U server chassis

and the X10DRG-O(T)+ motherboard, augmented by a daughter board for PCIe

expansion capabilities. The models and features are:

Model Network

Ports

PCIe Board Power Supply

4028GR-TR 1 Gb X9DRG-O-PCIE 1600 W, Platinum

4028GR-TRT 10 Gb X9DRG-O-PCIE 1600 W, Platinum

4028GR-TR2 1 Gb X10DRG-O-PCIE 2000 W, Titanium

4028GR-TRT2 10 Gb X10DRG-O-PCIE 2000 W, Titanium

Other components are:

• Eight 9-cm fans (FAN-0151L4)

• One air shroud (MCP-310-41808-0B) over PCI slots

• Two passive CPU heatsinks (SNK-P0048PS)

• Storage Accessories

One SAS backplane (BPN-SAS3-216A)

Twenty-four hot-swap drive carriers (MCP-220-00047-0B)

• Riser card (RSC-X9DRG-O)

• One rail set (MCP-290-00057-0N)

Operating systems certied for use with the system are listed on the web site.

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 4028GR-TR(T)(2) User's Manual

1-2 Motherboard Features

At the heart of the server is the X10DRG-O(T)+-CPU, a dual processor motherboard

based on the Intel PCH C612 chipset. Below are the main features. (See Figure

1-1 for a block diagram)

Processors

The X10DRG-O(T)+-CPU supports dual Intel E5-2600 v3/v4 series processors

in LGA 2011 sockets (Socket R3). Each processor supports dual Intel QuickPath

Interconnect (QPI) links of up to 9.6 GT/s per QPI. Refer to the motherboard

description pages on our web site for a complete listing of supported processors

(www.supermicro.com).

Memory

The motherboard has 24 DIMM slots that can support up to 3 TB of Load

Reduced (LRDIMM) or 1.5 TB of Registered (RDIMM) DDR4 ECC, 288-pin, at

2400/2133/1866/1600/1333 MHz. DIMMs up to 64 GB at 1.2V. See Chapter 5 for

details.

Serial ATA

The motherboard supports a ten SATA 3.0 ports. That is four I-SATA, two more

I-SATA with SuperDOM support, and four S-SATA. RAID 0, 1, 5 and 10 can be

enabled.

PCI Expansion Slots

The system includes a daughter board that supports PCI-E expansion cards.

• Daughterboard X9DRG-O-PCIE (SYS-4028GR-TR[T]) supports eleven PCI-E

3.0 devices, including up to eight double-width graphic processor units (GPUs)

with x16 full signal slots, plus two PCI-E 3.0 x8 and one PCI-E 2.0 x4 expansion

cards.

• Daughterboard X10DRG-O-PCIE (SYS-4028GR-TR[T]2) supports up to ten

double-width GPUs with x16 full signal slots, or eight double width GPUs with

three PCI-E 3.0 x16 and one PCI-E 3.0 x8 expansion cards

The daughter boards are further described in Chapter 5.

Note that both CPUs must be installed to enable use of all PCI-E slots.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro A+ AS-1113S-WN10RT Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8C Bedienungsanleitung

Supermicro

Supermicro SuperServer 621H-TN12R Bedienungsanleitung

Supermicro

Supermicro SBI-6129P-C3N Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 5049A-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro FatTwin F628G3-FT+ Bedienungsanleitung

Supermicro

Supermicro AS -1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5013C-M8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018A-LTN4 Bedienungsanleitung

Supermicro

Supermicro SuperBlade IBS-001 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-MT Bedienungsanleitung

Supermicro

Supermicro SSG-5049P-E1CR45L Betriebsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-2029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro 5018D2-AR12L Bedienungsanleitung

Supermicro

Supermicro SBI-7126T-SH Bedienungsanleitung

Supermicro

Supermicro SYS-521C-NR Bedienungsanleitung

Supermicro

Supermicro SYS-F629P3-RTB Betriebsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DTR Bedienungsanleitung

Supermicro

Supermicro SCF424 Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 220BT-HNTR Bedienungsanleitung

Supermicro

Supermicro Superserver Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung