Supermicro SERIES3800/S120T Bedienungsanleitung

SERIES3800/S120T

USER’S MANUAL

1.0

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDINGTHE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s

instruction manual, may cause interference with radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, you are encouraged to try to correct the interference by one or more of the

following measures: Reorient or relocate the receiving antenna. Increase the separation between

the equipment and the receiver. Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected. Consult the dealer or an experienced radio/television

technician for help.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: February 15, 2008

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SERIES3800/S120T (7045A-

C3/7045A-CT). Installation and maintenance should be performed by experienced

technicians only.

The SERIES3800/S120T (7045A-C3/7045A-CT) is a high-end server based

on the SC743TQ-865-SQ tower/4U rackmount chassis and the X7DCA-3/

X7DCA-i, a dual processor serverboard that supports dual Intel®Xeon®LGA771

5400/5300/5200/5100 series processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with

the server system and describes the main features of the X7DCA-3/X7DCA-i

serverboard and the SC743TQ-865-SQ chassis, which comprise the SERIES3800/

S120T (7045A-C3/7045A-CT).

Chapter 2: Server Installation

This chapter describes the steps necessary to setup the SERIES3800/S120T

(7045A-C3/7045A-CT) into a rack and check out the server conﬁguration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

SERIES3800/S120T (7045A-C3/7045A-CT) User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SERIES3800/S120T (7045A-C3/7045A-CT).

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7DCA-3/X7DCA-i serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC743TQ-865-SQ server chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring SAS/SATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: Intel HostRaid Setup Guidelines

Appendix D: System Speciﬁcations

Preface

Notes

SERIES3800/S120T (7045A-C3/7045A-CT) User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Onboard SAS..................................................................................................1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports ..............................................................................1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power.................................................................................................1-3

SAS Subsystem.............................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Front Control Panel.........................................................................................1-3

I/O Backplane.................................................................................................. 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................ 2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ...................................................................................2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground .........................................................................................2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Chassis Rails............................................................................. 2-5

vii

Table of Contents

Installing the Rack Rails .................................................................................2-6

Installing the Server into the Rack.................................................................. 2-7

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

Power..............................................................................................................3-1

Reset............................................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................3-2

Power..............................................................................................................3-2

HDD................................................................................................................. 3-2

NIC1................................................................................................................3-2

NIC2................................................................................................................3-2

Overheat/Fan Fail ...........................................................................................3-2

Power Fail.......................................................................................................3-3

3-4 Drive Carrier LEDs..........................................................................................3-3

SAS Drives......................................................................................................3-3

SATA Drives .................................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions.............................................................................................4-3

4-4 Operating Precautions ....................................................................................4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-2

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processor and Heat Sink...........................................................5-5

5-6 Installing Memory............................................................................................5-9

5-7 Adding PCI Cards..........................................................................................5-11

5-8 Serverboard Details ......................................................................................5-12

viii

SERIES3800/S120T (7045A-C3/7045A-CT) User's Manual

X7DCA-3/X7DCA-i Quick Reference............................................................5-13

5-9 Connector Deﬁnitions ...................................................................................5-14

5-10 Jumper Settings............................................................................................ 5-21

5-11 Onboard Indicators........................................................................................5-23

5-12 Parallel, Floppy, IDE, and SATA Ports.......................................................... 5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Front Control Panel.........................................................................................6-3

6-3 System Fans................................................................................................... 6-4

Fan Failure...................................................................................................... 6-4

Replacing Chassis Cooling Fans....................................................................6-4

6-4 Drive Bay Installation...................................................................................... 6-6

SAS/SATA Backplane...................................................................................... 6-7

Installing Components in the 5.25" Drive Bays ..............................................6-8

6-5 Power Supply.................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................7-2

7-3 Main BIOS Setup............................................................................................ 7-2

7-4 Advanced Setup..............................................................................................7-7

7-5 Security ......................................................................................................... 7-21

7-6 Boot............................................................................................................... 7-23

7-7 Exit ................................................................................................................ 7-24

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C Intel HostRAID Setup Guidelines

Appendix D System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The 7045A-C3/7045A-CT is a high-end workstation comprised of two main subsys-

tems: the SC743TQ-865-SQ tower/4U server chassis and the X7DCA-3/X7DCA-i

dual Intel Xeon processor serverboard. Please refer to our web site for information

on operating systems that have been certiﬁed for use with the SERIES3800/S120T

(7045A-C3/7045A-CT) (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have been

included with the SERIES3800/S120T (7045A-C3/7045A-CT), as listed below:

 Two (2) 8-cm hot-swap PWM "SuperQuiet" chassis fans (FAN-0104L4)

 One (1) 9-cm PWM "SuperQuiet" exhaust fan (FAN-0103L4)

 Two (2) CPU heat sinks (SNK-P0034AP4)

One (1) 3.5" ﬂoppy drive (FPD-PNSC-01)

 One (1) cable for DVD drive (CBL-0140L)

 One (1) ﬂoppy cable (CBL-112L)

 SAS Accessories (7045A-C3)

One (1) SAS backplane (CSE-SAS-743TQ)

Two (2) SAS cables (CBL-0119L)

Six (6) SATA hot-swap drive carriers [CSE-PT17(B)]

 SATA Accessories (7045A-CT)

One (1) SATA backplane (CSE-SAS-743TQ)

Six (6) SATA cables (CBL-0061L)

Two (2) SGPIO cables (CBL-0157L)

Six (6) SATA hot-swap drive carriers [CSE-PT17(B)]

 Optional:

One (1) 8-cm PWM fan (FAN-0104L)

One (1) rackmount kit [CSE-PT26L-(B)]

Chapter 1: Introduction

1-1

SERIES3800/S120T (7045A-C3/7045A-CT) User's Manual

1-2

1-2 Serverboard Features

At the heart of the SERIES3800/S120T (7045A-C3/7045A-CT) lies the X7DCA-3/

X7DCA-i, a dual processor serverboard based on the Intel 5100 chipset and

designed to provide maximum performance. Below are the main features of the

X7DCA-3/X7DCA-i. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X7DCA-3/X7DCA-i supports single or dual LGA771 type Intel Xeon

5400/5300/5200/5100 Series processors at a FSB speed of 1333/1066 MHz. Please

refer to the serverboard description pages on our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The X7DCA-3/X7DCA-i has six 240-pin DIMM slots that can support up to 32 GB of

ECC DDR2-667/533 SDRAM. The memory operates in an interleaved conﬁguration

and requires requires modules of the same size and speed to be installed two at a

time. See Chapter 5 Section 5 for details.

Onboard SAS

An onboard LSI 1068 SAS controller is integrated into the X7DCA-3 (only), which

supports eight SAS hard drives. The SAS drives are connected to a backplane that

provides power, bus termination and conﬁguration settings. These SAS drives are

hot-swappable units and support RAID levels 0, 1, 10 and (with iButton) 5.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SAS drives.

Serial ATA

A Serial ATA controller is integrated into the ICH9 (South Bridge) portion of the

chipset to provide a six-port 3 Gb/s SATA subsystem, which is RAID 0, 1, 10 and

5 supported. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

PCI Expansion Slots

The X7DCA-3/X7DCA-i has one PCI-Express x16 slot, one PCI-Express x4 (in

a x16 slot), two 64-bit 133/100 MHz PCI-X slots, two PCI 33 MHz slots and an

IPMI slot.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SBA-7222G-T2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-i2 Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 2027GR-TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 610C-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-FRN2T Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F2014S-RNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 120C-TN10R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 2026GT-TRF Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE2CR60 Bedienungsanleitung

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro A+ AS-2124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019C-HTN2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-3R Bedienungsanleitung

Supermicro

Supermicro A+ AS-5019D-FTN4 Bedienungsanleitung

Supermicro

Supermicro AS-1010P-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1RT Bedienungsanleitung

Supermicro

Supermicro AS-3014TS-i Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-16C-IP Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-12T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-511E-WR Bedienungsanleitung

Supermicro

Supermicro GEM002 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung