Supermicro SUPERSERVER 6018R-MD Bedienungsanleitung

USER’S MANUAL

1.0

SUPERSERVER®

6018R-MD

6018R-MDR

SUPERSERVER 6018R-MD/MDR User's Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: June 11, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 6018R-MD/MDR.

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 6018R-MD/MDR is a high-end server based on the SC514-505/

R400C chassis and the X10DRD-L serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRD-L serverboard and

the SC514-505/R400C chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6018R-MD/

MDR into a rack and check out the server conguration prior to powering up the

system. If your server was ordered without processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6018R-MD/MDR.

iii

SUPERSERVER 6018R-MD/MDR User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRD-L serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC514-505/R400C server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconguring drives and when replacing system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

SUPERSERVER 6018R-MD/MDR User's Manual

Contents

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SATA................................................................................................................ 1-2

PCI-Expansion ................................................................................................ 1-2

Rear I/O Ports................................................................................................. 1-2

Onboard Graphics........................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Rack Installation

2-1 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-2 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-3 Installing the System into a Rack .................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Assembling the Outer Rails ............................................................................ 2-5

Installing the Outer Rails onto the Rack......................................................... 2-6

Sliding the Chassis onto the Rack Rails......................................................... 2-7

Installing the Server into a Two Post Rack..................................................... 2-8

Chapter 3 System Interface

3-1 Overview ........................................................................................................ 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Reset............................................................................................................... 3-2

Power .............................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Information LED .............................................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup ................................................5-1

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing a Passive CPU Heatsink ................................................................. 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel......................................................................... 5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

5-6 Adding PCI Expansion Cards ....................................................................... 5-10

5-7 Serverboard Details .......................................................................................5-11

vii

SUPERSERVER 6018R-MD/MDR User's Manual

X10DRD-L Quick Reference ......................................................................... 5-12

5-8 Connector Denitions ................................................................................... 5-13

5-9 Jumper Settings ............................................................................................ 5-19

5-10 Onboard Indicators........................................................................................ 5-21

5-11 SATA Ports .................................................................................................... 5-22

5-12 Installing Drivers............................................................................................ 5-23

SuperDoctor® 5 ............................................................................................ 5-24

5-13 Onboard Battery............................................................................................ 5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Removing Power from the System ................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-2

6-4 Installing Hard Drives...................................................................................... 6-4

6-4 System Fans ................................................................................................... 6-6

6-5 Installing Expansion Cards ............................................................................. 6-8

6-7 Power Supply................................................................................................ 6-10

6018R-MD..................................................................................................... 6-10

6018R-MDR ...................................................................................................6-11

Chapter 7 BIOS..........................................................................................7-1

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-31

7-5 IPMI............................................................................................................... 7-33

7-6 Security Settings ........................................................................................... 7-35

7-7 Boot Settings................................................................................................. 7-39

7-8 Save & Exit ................................................................................................... 7-42

Appendix A BIOS Error Beep Codes ..................................................... A-1

Appendix B System Specications ........................................................ B-1

viii

Chapter 1

Introduction

1-1 Overview

The SuperServer 6018R-MD/MDR is a 1U server comprised of two main subsys-

tems: the SC514-505/R400C chassis and the X10DRD-L serverboard. Please refer

to our website for information on operating systems that have been certied for use

with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6018R-MD/MDR, as listed below:

•Five 4-cm counter-rotating fans (FAN-0156L4)

•Two passive CPU heatsinks (SNK-P0047PS)

•One SATA power cable (CBL-0082L)

•Two SATA cables (CBL-0481L)

•One RSC-RR1U-E8 riser card

•One bracket for dual xed 2.5" hard drives (MCP-220-51401-0N)

•One bracket for single xed 3.5" hard drive (MCP-220-51402-0N, 6018R-MD

only)

•One rail kit consisting of one set each of outer rails (MCP-290-00102-0N) and

inner rails (MCP-290-00108-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

•If you have any questions, please contact our support team at:

[email protected]m

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6018R-MD/MDR User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 6018R-MD/MDR lies the X10DRD-L, a dual proces-

sor serverboard based on Intel's C612 chipset. Below are the main features of the

X10DRD-L (see Figure 1-1 for a block diagram of the chipset).

Processors

The X10DRD-L supports single or dual Intel®Xeon®E5-2600 v3 Series processors

in LGA2011-3 (Socket R3) sockets. Please refer to the serverboard description

pages on our website for a complete listing of supported processors.

Memory

The X10DRD-L has eight DIMM sockets that can support up to 512 GB of load

reduced (LRDIMM) or 256 GB of registered (RDIMM) DDR4-2133/1866/1600

memory. Please refer to Chapter 5 for installing memory.

SATA

An on-chip SATA controller is integrated into the X10DRD-L to provide a six-port,

SATA 3.0 subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives

are hot-swappable units.

Note: Documentation on RAID setup guidelines can be found on our website.

PCI-Expansion

One PCI-E 3.0 x8 slot is included on the X10DRD-L. An expansion card may be

added to the system with the included riser card to support a standard size PCI-E

3.0 x8 FHHL (full-height, half-length) add-on card.

Rear I/O Ports

The rear I/O panel include one COM port, a VGA (monitor) port, four USB 2.0 ports

and two gigabit Ethernet ports. A dedicated IPMI LAN port is also included.

Onboard Graphics

The X10DRD-L provides onboard graphics with an Aspeed 2400 BMC (baseboard

management controller).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 2028TP-HC0R Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E100-13AD-H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-HC1R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018A-TN7B Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-743A-N4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-111E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MD-H8TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6011H Bedienungsanleitung

Supermicro

Supermicro SuperServer 6027TR-DTRF+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-MR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5014C-MF 5014C-MF Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019GP-TT Bedienungsanleitung

Supermicro

Supermicro AS -2024S-TR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-N32JBF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6010L Bedienungsanleitung

Supermicro

Supermicro SuperServer 220U-TNR Bedienungsanleitung

Supermicro

Supermicro SBI-6129P-C3N Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 2027GR-TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013A-T Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028GQ-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung