Supermicro SUPER SUPERSERVER 2028U Series Bedienungsanleitung

SUPER ®

USER’S MANUAL

Revision 1.0

SUPERSERVER®

2028U SERiES

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: December 16, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (www.supermicro.com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 2028U Series Manual

Contents

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Onboard Serial ATA ........................................................................................ 1-2

Rear I/O Ports................................................................................................. 1-2

Graphics Controller ......................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drives ..................................................................................................... 1-3

PCI Expansion Slots ....................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-4

NVMe .............................................................................................................. 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing the Inner Rails on the Chassis ........................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Chapter 3 System Interface......................................................................3-1

3-1 Overview ........................................................................................................ 3-1

Preface

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Installing the Processor and Heatsink ............................................................ 5-2

Installing an LGA 2011 Processor................................................................... 5-2

Installing a CPU Heatsink ............................................................................... 5-5

Removing the Heatsink .................................................................................. 5-6

5-3 Connecting Cables.......................................................................................... 5-7

Connecting Data Cables ................................................................................. 5-7

Connecting Power Cables .............................................................................. 5-7

Connecting the Control Panel......................................................................... 5-7

5-4 I/O Ports.......................................................................................................... 5-8

LAN Ports........................................................................................................ 5-8

5-5 Installing Memory............................................................................................ 5-9

Memory Support............................................................................................ 5-10

Processor and Memory Module Population Conguration ...................... 5-10

Populating DDR4 Memory Modules......................................................... 5-10

SUPERSERVER 2028U Series Manual

5-6 Serverboard Details .......................................................................................5-11

Serverboard Quick Reference....................................................................... 5-12

5-7 Connector Denitions.................................................................................... 5-14

Power Connectors ....................................................................................... 5-14

Control Panel Connector............................................................................... 5-14

Other Connectors.......................................................................................... 5-17

5-8 Jumper Settings ............................................................................................ 5-20

5-9 Onboard Indicators........................................................................................ 5-22

5-10 SATA Ports .................................................................................................... 5-23

5-11 Installing Software......................................................................................... 5-24

SuperDoctor®5 ............................................................................................. 5-25

5-12 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup........................................................6-1

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 Hard Drive Installation..................................................................................... 6-4

6-5 Adding PCI Expansion Cards ........................................................................ 6-8

6-6 System Fans ..................................................................................................6-11

Replacing a System Fan................................................................................6-11

Air Shroud ..................................................................................................... 6-12

6-7 Power Supply................................................................................................ 6-13

Replacing a Power Supply Module............................................................... 6-13

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-25

7-5 IPMI............................................................................................................... 7-27

7-6 Security......................................................................................................... 7-29

7-7 Boot............................................................................................................... 7-30

7-8 Save & Exit ................................................................................................... 7-31

Appendix A BIOS Error Beep Codes ..................................................... A-1

Appendix B System Specications ........................................................ B-1

Chapter 1

Introduction

1-1 Overview

The SuperServer 2028U Series is a high-end server comprised of two main

subsystems: the SC219UAC(4)-R1K02 2U server chassis and the X10DRU-i+

dual processor serverboard. Refer to the Supermicro web site for information on

operating systems that have been certied for use with the system (www.supermicro.

com).

2028U Series Models

System LAN Ports NVMe Ultra Riser Card Backplane

2028U-TR4+ Four GbE no AOC-2UR68-i4G BPN-SAS3-216A

2028U-TRT+ Two 10GBase-T no AOC-2UR68-i2XT BPN-SAS3-216A

2028U-TR4T+ Four 10GBase-T no AOC-2UR6-i4XT BPN-SAS3-216A

2028U-TRTP+ Two 10G SFP+ no AOC-2UR68-i2XS BPN-SAS3-216A

2028U-TNRT+ Two 10GBase-T 4 port AOC-2UR8N4-i2XT BPN-SAS3-216A-N4

2028U-TNR4T+ Four 10GBase-T 4 port AOC-2URN4-i4XT BPN-SAS3-216A-N4

In addition to the above components, the server includes:

•Four 8-cm system cooling fans (FAN-0118L4)

•Air shroud MCP-310-82908-0B

•Two passive CPU heatsinks (SNK-P0058PSU)

•Twenty-four hard drive carriers (MCP-220-00047-0B)

•Riser Cards:

One RSC-R1UW-E8R-O-P

One RSC-R2UW-4E8-O-P

•One rackmount rail kit (MCP-290-00053-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 2028U Series User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 2028U Series lies the X10DRU-i+, a dual processor

serverboard based on the Intel PCH C612 chipset. Below are the main features of

the serverboard. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The serverboard supports single or dual Intel E5-2600v3 Series processors in

LGA2011 sockets (Socket R3). Refer to the Supermicro web site for a complete

listing of supported processors (www.supermicro.com).

Memory

The serverboard has 24 memory sockets that can support up to 768 GB of ECC

registered DDR4-1600/1333/1066/800 non-volatile RDIMM (Registered DIMMs)

or 1536 GB of LRDIMM (Load-Reduced DIMMs) DDR4-2133/1866/1600/1333

memory. Please refer to Chapter 5 for installing memory.

Onboard Serial ATA

A SATA controller is integrated into the chipset to provide a ten-port SATA

subsystem. Six of the ports are supported by the Intel PCH and four of the ports are

supported by the Intel SCU. The SATA 3.0 ports are connected to the backplane

by default. RAID 0, 1, 5 and 10 are supported by Intel RSTe Software RAID.

Rear I/O Ports

The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports

and a dedicated IPMI LAN port. In addition, there are several possible networking

congurations depending on the pre-installed Ultra riser card. See the table in

Section 1-1.

Graphics Controller

The serverboard features an integrated ASpeed 2400 BMC graphics chip.

1-3

Chapter 1: Introduction

1-3 Server Chassis Features

The 2028U Series is built upon the SC219UAC-R1K02 chassis or the SC219UAC4-

R1K02 for NVMe models. Details and related procedures can be found in Chapter

6.The following is a general outline of the main features of the chassis.

System Power

The chassis features a redundant 1 KW power supply consisting of two hot-plug

power modules. They have 80 Plus certication at Titanium Level (96%) high-

efciency. The system will continue to operate if one module fails or is replaced.

Hard Drives

The chassis supports up to twenty-four 2.5" hot-swap hard drives. A standard

2028U Series server supports ten SATA drives, or for NVMe models, eight SATA

drives and up to four NVMe drives. Expansion cards are required add more drives

up to 24.

PCI Expansion Slots

All 2028U Series models include two WIO riser cards that support PCI-Express 3.0

expansion cards—four full size x8 cards and one low prole x8 card. In addition,

each system comes with an Ultra riser card to provide added features including

additional PCI expansion slots. The total number of expansion cards depends on

the model in the 2028U Series. See section 6-5 for details.

Front Control Panel

The chassis front control panel provides system monitoring and power control.

Status LEDs indicate system power, HDD activity, network activity, UID, and

overheat and fan failure.

Cooling System

The chassis has an innovative cooling design that features four 8-cm high-

performance fans. Fan speed can be determined by system temperature via IPMI.

Each power supply module also includes a cooling fan.

1-4

SUPERSERVER 2028U Series User's Manual

Figure 1-1. Intel PCH C612 Chipset:

System Block Diagram

Note: This is a general block diagram. Please see Chapter 5 for details.

Port A Port B Port B NCSI Port C Port C

NIC

Port A

0~7

Port B

0~7

Port B

8~15

Port C

0~10

Port C

11~15

Port 0, 1 Port 3

Type A

Rear

#1 #1 #1 #1 #1 #1 #1 #1

#2 #2 #2 #2 #2 #2 #2 #2

#3 #3 #3 #3 #3 #3 #3 #3

DDR4 DIMM

x16

PE1 PE2 PE3 PE1 PE2 PE3 QPI1 QPI0

QPI1 QPI0

DMI

Upper

Lower

Processor

VGA

DDR3 NCSI

LAN

UART

Onboard TPM (Optional)

NVMe

(2028U-TNRT+ and -TNR4T+ models only) The NVM Express ports provide high-

speed, low-latency connections directly from the CPU to NVMe Solid State drives

(SSDs). This greatly increases SSD throughput and signicantly reduces storage

device latency by simplifying driver and software requirements resulting from the

direct PCI-E interface between the CPU and the NVMe SSD drives.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-110A-16C-RN10SP Bedienungsanleitung

Supermicro

Supermicro 5025M-4 Bedienungsanleitung

Supermicro

Supermicro Superserver MicroCloud 5038MA-H24TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028UX-TR4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-610U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-520P-ACTR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MD-H8TRF Bedienungsanleitung

Supermicro

Supermicro SC847 CHASSIS SERIES Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro SBI-7127R-SH Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNC8R Montageanleitung

Supermicro

Supermicro SuperServer SYS-741GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-12TN4 Bedienungsanleitung

Supermicro

Supermicro AS-2020A-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-4C-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 5017R-iHDP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-i Bedienungsanleitung

Supermicro

Supermicro S-1600 R4 Gebrauchs- und Pflegehandbuch

Supermicro

Supermicro Storage SuperServer SSG-640SP-DE1CR90 Bedienungsanleitung

Supermicro

Supermicro SuperServer 510P-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FTN10P Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1115SV-WTNRT Bedienungsanleitung

Supermicro

Supermicro 6028R-WTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung