Supermicro Supero 6016T-6F Bedienungsanleitung

SUPERSERVER

6016T-6F

SUPER

USER’S MANUAL

1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: February 20, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6016T-6F. Instal-

lation and maintainance should be performed by experienced technicians only.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X8DT6-F serverboard and

the SC815TQ-563CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6016T-6F into

a rack and check out the server conﬁguration prior to powering up the system. If

your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6016T-6F.

SUPERSERVER 6016T-6F User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DT6-F serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-563CB server chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring SAS/SATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SAS ................................................................................................................1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

SAS/SATA Subsystem.....................................................................................1-3

Front Control Panel.........................................................................................1-3

I/O Backplane.................................................................................................. 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rails .................................................................................2-4

Installing the Outer Rails.................................................................................2-5

SUPERSERVER 6016T-6F User's Manual

vii

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack........................................................... 2-7

2-6 Checking the Serverboard Setup.................................................................... 2-8

2-7 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

3-4 Hard Drive Carrier LEDs................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

Installing an LGA1366 Processor ...................................................................5-5

Installing the Heatsink.....................................................................................5-7

Removing the Heatsink................................................................................... 5-7

Table of Contents

viii

5-6 Installing Memory............................................................................................5-8

Memory Support..............................................................................................5-8

DIMM Installation ............................................................................................ 5-8

5-7 Adding PCI Expansion Cards .......................................................................5-10

5-8 Serverboard Details .......................................................................................5-11

X8DT6-F Quick Reference............................................................................ 5-12

5-9 Connector Deﬁnitions ...................................................................................5-13

5-10 Jumper Settings............................................................................................ 5-19

5-11 Onboard Indicators........................................................................................5-21

5-12 Floppy, SAS and SATA Ports........................................................................ 5-22

5-13 Installing Software.........................................................................................5-23

SuperDoctor III..............................................................................................5-24

5-14 Onboard Battery............................................................................................5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal.......................................................................6-4

Removing the Front Bezel..............................................................................6-4

Accessing the Drive Bays............................................................................... 6-5

Hard Drive Installation.....................................................................................6-6

DVD-ROM Drive Installation ...........................................................................6-8

6-5 Power Supply..................................................................................................6-9

Power Supply Failure................................................................................. 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-22

7-5 Boot Conﬁguration ........................................................................................ 7-24

7-6 Exit Options...................................................................................................7-26

7-7 BIOS Recovery ............................................................................................. 7-27

Appendix A BIOS Error Beep Codes

Appendix B Installing Windows

Appendix C System Speciﬁcations

SUPERSERVER 6016T-6F User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 6016T-6F is a high-end server comprised of two main subsys-

tems: the SC815TQ-563CB 1U server chassis and the X8DT6-F dual processor

serverboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6016T-6F, as listed below:

• Two passive CPU heatsinks (SNK-P0037P)

• One slim DVD-ROM drive (DVM-TEAC-DVD-SBT)

• Four counter-rotating fans (FAN-0086L4)

• One air shroud (MCP-310-18002-0N)

• One riser card for PCI-E x8 expansion card (CSE-RR1U-E8)

• SAS/SATA Accessories

One SAS/SATA backplane (BPN-SAS-815TQ)

One iPass to 4-connector SATA cable (CBL-0176L-01)

Four drive carriers (MCP-220-00024-0B)

• One rackmount kit (CSE-PT51)

• One CD containing drivers and utilities

• SuperServer 6016T-6F User's Manual

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6016T-6F User's Manual

1-2 Serverboard Features

The SuperServer 6016T-6F is built around the X8DT6-F, a dual processor

serverboard based on the Intel IOH-36D + ICH10R chipset and designed to provide

maximum performance. Below are the main features of the X8DT6-F. (See Figure

1-1 for a block diagram of the chipset).

Processors

The X8DT6-F supports single or dual Intel® Xeon 5600/5500 Series processors.

Please refer to the serverboard description pages on our web site for a complete

listing of supported processors (www.supermicro.com).

Memory

The X8DT6-F has twelve DIMM slots that can support up to 192 GB of ECC regis-

teredDDR3-1333/1066/800or upto 48 GBof ECCunbufferedDDR3-1333/1066/800

SDRAM. Memory mirroring is supported. See Chapter 5 for details.

SAS

An LSI 2008 SAS controller is integrated into the serverboard to support eight SAS2

ports, which are RAID 0, 1 and 10 capable. The SAS drives are hot-swappable

units. SAS RAID 5 is also supported with the AOC-SAS2-RAID5-KEY (optional)

installed on the serverboard.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SAS drives.

Serial ATA

A Serial ATA controller is integrated into the ICH10R (South Bridge) portion of the

IOH-36D chipset to provide a six-port 3 Gb/s SATA subsystem, which is RAID 0, 1,

10 and 5 supported. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives. RAID 5 requires the use

of an iButton.

PCI Expansion Slots

The X8DT6-F has three PCI-Express 2.0 x8 slots, one PCI-Express 2.0 x4 slot and

one PCI-Express x4 slot. For the 6016T-6F server, one PCI-Express x8 add-on card

is supported with the use of a riser card (included).

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperStorage SSG-136R-N32JBF Bedienungsanleitung

Supermicro

Supermicro SuperServer ARS-210ME-FNR Bedienungsanleitung

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GT-HNTF Bedienungsanleitung

Supermicro

Supermicro SuperServer 220U-MTNR Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9P-FN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015TC-10G Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5039MC-H12TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029TP-HTR Bedienungsanleitung

Supermicro

Supermicro AS-2014CS-TR Bedienungsanleitung

Supermicro

Supermicro AS -1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-C1R Bedienungsanleitung

Supermicro

Supermicro AS-1124US-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220TP-HTTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TR Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 5049A-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-611C-TN4R Bedienungsanleitung

Supermicro

Supermicro SuperServer 6028U-E1CNR4T+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-530MT-H8TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 510P-M Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-8Q Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung